[PATCH] ramips: replace "mac-address-ascii" with "mac-base"
Mikhail Zhilkin
csharper2005 at gmail.com
Fri Jul 14 11:36:14 PDT 2023
On 7/14/2023 4:11 PM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal at milecki.pl>
>
> With upstream accepted "mac-base" binding there is no need for a
> downstream "mac-address-ascii" workaround anymore.
>
> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
> ---
> .../dts/mt7621_raisecom_msg1500-x-00.dts | 32 ++++++++++-------
> .../ramips/dts/mt7621_tplink_ec330-g5u-v1.dts | 34 +++++++++++--------
> 2 files changed, 40 insertions(+), 26 deletions(-)
>
> diff --git a/target/linux/ramips/dts/mt7621_raisecom_msg1500-x-00.dts b/target/linux/ramips/dts/mt7621_raisecom_msg1500-x-00.dts
> index 5d713c0098..07297df083 100644
> --- a/target/linux/ramips/dts/mt7621_raisecom_msg1500-x-00.dts
> +++ b/target/linux/ramips/dts/mt7621_raisecom_msg1500-x-00.dts
> @@ -82,15 +82,23 @@
> read-only;
>
> compatible = "nvmem-cells";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - macaddr_config_8014: macaddr at 8014 {
> - reg = <0x8014 0x11>;
> - };
>
> - macaddr_config_8036: macaddr at 8036 {
> - reg = <0x8036 0x11>;
> + nvmem-layout {
> + compatible = "fixed-layout";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + macaddr_config_8014: macaddr at 8014 {
> + compatible = "mac-base";
> + reg = <0x8014 0x11>;
> + #nvmem-cell-cells = <1>;
> + };
> +
> + macaddr_config_8036: macaddr at 8036 {
> + compatible = "mac-base";
> + reg = <0x8036 0x11>;
> + #nvmem-cell-cells = <1>;
> + };
> };
> };
>
> @@ -137,8 +145,8 @@
> };
>
> &gmac0 {
> - nvmem-cells = <&macaddr_config_8014>;
> - nvmem-cell-names = "mac-address-ascii";
> + nvmem-cells = <&macaddr_config_8014 0>;
> + nvmem-cell-names = "mac-address";
> };
>
> &gmac1 {
> @@ -146,8 +154,8 @@
> label = "wan";
> phy-handle = <ðphy4>;
>
> - nvmem-cells = <&macaddr_config_8036>;
> - nvmem-cell-names = "mac-address-ascii";
> + nvmem-cells = <&macaddr_config_8036 0>;
> + nvmem-cell-names = "mac-address";
> };
>
> &mdio {
> diff --git a/target/linux/ramips/dts/mt7621_tplink_ec330-g5u-v1.dts b/target/linux/ramips/dts/mt7621_tplink_ec330-g5u-v1.dts
> index 6c9cc40701..537b6f70a7 100644
> --- a/target/linux/ramips/dts/mt7621_tplink_ec330-g5u-v1.dts
> +++ b/target/linux/ramips/dts/mt7621_tplink_ec330-g5u-v1.dts
> @@ -230,12 +230,20 @@
> read-only;
>
> compatible = "nvmem-cells";
> - #address-cells = <1>;
> - #size-cells = <1>;
>
> - macaddr_factory_165: macaddr at 165 {
> - reg = <0x165 0x11>;
> + nvmem-layout {
> + compatible = "fixed-layout";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + macaddr_factory_165: macaddr at 165 {
> + compatible = "mac-base";
> + reg = <0x165 0x11>;
> + #nvmem-cell-cells = <1>;
> + };
> };
> +
> +
> };
>
> partition at 0_wholeflash {
> @@ -257,8 +265,8 @@
> mediatek,mtd-eeprom = <&factory 0x8000>;
> ieee80211-freq-limit = <2400000 2500000>;
>
> - nvmem-cells = <&macaddr_factory_165>;
> - nvmem-cell-names = "mac-address-ascii";
> + nvmem-cells = <&macaddr_factory_165 0>;
> + nvmem-cell-names = "mac-address";
> };
> };
>
> @@ -269,15 +277,14 @@
> mediatek,mtd-eeprom = <&factory 0x14000>;
> ieee80211-freq-limit = <5000000 6000000>;
>
> - nvmem-cells = <&macaddr_factory_165>;
> - nvmem-cell-names = "mac-address-ascii";
> - mac-address-increment = <(2)>;
> + nvmem-cells = <&macaddr_factory_165 2>;
> + nvmem-cell-names = "mac-address";
> };
> };
>
> &gmac0 {
> - nvmem-cells = <&macaddr_factory_165>;
> - nvmem-cell-names = "mac-address-ascii";
> + nvmem-cells = <&macaddr_factory_165 0>;
> + nvmem-cell-names = "mac-address";
> };
>
> &gmac1 {
> @@ -285,9 +292,8 @@
> label = "wan";
> phy-handle = <ðphy0>;
>
> - nvmem-cells = <&macaddr_factory_165>;
> - nvmem-cell-names = "mac-address-ascii";
> - mac-address-increment = <(1)>;
> + nvmem-cells = <&macaddr_factory_165 1>;
> + nvmem-cell-names = "mac-address";
> };
>
> &mdio {
[TP-Link EC330-G5u v1 - OK]
Tested-by: Mikhail Zhilkin <csharper2005 at gmail.com>
--
Best regards,
Mikhail
More information about the openwrt-devel
mailing list