[PATCH] ramips: fix green LED for D-Link DAP-X1860

[Philip Prindeville]

Reviewed-by: Philip Prindeville <philipp at redfish-solutions.com>


> On Apr 23, 2023, at 7:40 AM, Sebastian Schaper <openwrt at sebastianschaper.net> wrote:
> 
> It was found this device uses a single tri-color power/status LED
> rather than individual red/orange LEDs, which also supports green.
> 
> Add GPIO for green color and use with `boot` and `running` aliases.
> 
> Signed-off-by: Sebastian Schaper <openwrt at sebastianschaper.net>
> ---
> .../linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts  | 13 +++++++++----
> 1 file changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts b/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
> index 1aa3f7c91b..818d2d8c41 100644
> --- a/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
> +++ b/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
> @@ -15,9 +15,9 @@
> 
> aliases {
> label-mac-device = &gmac0;
> - led-boot = &led_power_orange;
> + led-boot = &led_power_green;
> led-failsafe = &led_power_red;
> - led-running = &led_power_orange;
> + led-running = &led_power_green;
> led-upgrade = &led_power_red;
> };
> 
> @@ -40,15 +40,20 @@
> leds {
> compatible = "gpio-leds";
> 
> + led_power_green: power_green {
> + label = "green:power";
> + gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
> + default-state = "on";
> + };
> +
> led_power_red: power_red {
> label = "red:power";
> gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
> };
> 
> - led_power_orange: power_orange {
> + power_orange {
> label = "orange:power";
> gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
> - default-state = "on";
> };
> 
> rssihigh {
> -- 
> 2.34.1
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel