[PATCH 22.03] ath79: add support for MikroTik RouterBOARD hAP ac lite

Thibaut VARÈNE hacks at slashdirt.org
Sat May 21 08:07:31 PDT 2022 

The MikroTik RB952Ui-5ac2nD (sold as hAP ac lite) is an indoor 2.4Ghz
and 5GHz AP/router with a 2 dBi integrated antenna.

See https://mikrotik.com/product/RB952Ui-5ac2nD for more details.

Specifications:
 - SoC: QCA9533
 - RAM: 64MB
 - Storage: 16MB NOR
 - Wireless: QCA9533 802.11b/g/n 2x2 / QCA9887 802.11a/n/ac 2x2
 - Ethernet: AR934X switch, 5x 10/100 ports,
    10-28 V passive PoE in port 1, 500 mA PoE out on port 5
 - 6 user-controllable LEDs:
   - 1x user (green)
   - 5x port status (green)

Flashing:
 TFTP boot initramfs image and then perform sysupgrade. The "Internet"
 port (port number 1) must be used to upload the TFTP image, then
 connect to any other port to access the OpenWRT system.
 Follow common MikroTik procedure as in
 https://openwrt.org/toh/mikrotik/common.

Signed-off-by: Thibaut VARÈNE <hacks at slashdirt.org>
(cherry picked from commit 2bd33e8626bd04fd7115ee1a42aaf03aae2fffb8)
---
 ...9533_mikrotik_routerboard-952ui-5ac2nd.dts | 18 ++++
 .../dts/qca9533_mikrotik_routerboard-95x.dtsi | 98 +++++++++++++++++++
 target/linux/ath79/image/mikrotik.mk          | 10 ++
 .../mikrotik/base-files/etc/board.d/01_leds   |  7 ++
 .../base-files/etc/board.d/02_network         |  5 +
 .../etc/hotplug.d/firmware/10-ath9k-eeprom    |  3 +
 .../etc/hotplug.d/firmware/11-ath10k-caldata  |  1 +
 7 files changed, 142 insertions(+)
 create mode 100644 target/linux/ath79/dts/qca9533_mikrotik_routerboard-952ui-5ac2nd.dts
 create mode 100644 target/linux/ath79/dts/qca9533_mikrotik_routerboard-95x.dtsi

diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-952ui-5ac2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-952ui-5ac2nd.dts
new file mode 100644
index 0000000000..b32d38a697
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-952ui-5ac2nd.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_mikrotik_routerboard-95x.dtsi"
+
+/ {
+	compatible = "mikrotik,routerboard-952ui-5ac2nd", "qca,qca9533";
+	model = "MikroTik RouterBOARD 952Ui-5ac2nD (hAP ac lite)";
+};
+
+&pcie0 {
+	status = "okay";
+
+	wifi at 0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0 0 0 0 0>;
+	};
+};
+
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-95x.dtsi b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-95x.dtsi
new file mode 100644
index 0000000000..79c9f44d32
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-95x.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_mikrotik_routerboard-16m.dtsi"
+
+/ {
+	aliases {
+		led-boot = &led_user;
+		led-failsafe = &led_user;
+		led-running = &led_user;
+		led-upgrade = &led_user;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_user: user {
+			label = "green:user";
+			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		port1 {
+			label = "green:port1";
+			gpios = <&gpio_ext 0 GPIO_ACTIVE_LOW>;
+		};
+
+		port2 {
+			label = "green:port2";
+			gpios = <&gpio_ext 1 GPIO_ACTIVE_LOW>;
+		};
+
+		port3 {
+			label = "green:port3";
+			gpios = <&gpio_ext 2 GPIO_ACTIVE_LOW>;
+		};
+
+		port4 {
+			label = "green:port4";
+			gpios = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
+		};
+
+		port5 {
+			label = "green:port5";
+			gpios = <&gpio_ext 4 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+
+		usb_power {
+			gpio-export,name = "usb-power";
+			gpio-export,output = <1>;
+			gpios = <&gpio_ext 5 GPIO_ACTIVE_LOW>;
+		};
+
+		enable_poe_port5 {
+			gpio-export,name = "enable-poe:port5";
+			gpio-export,output = <0>;
+			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pin_spi_cs1>;
+
+	gpio_ext: gpio_ext at 1 {
+		compatible = "fairchild,74hc595";
+		reg = <1>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		registers-number = <1>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+
+&pinmux {
+	pin_spi_cs1: pinmux_spi_cs1 {
+		pinctrl-single,bits = <0x8 0x0a000000 0xff000000>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-handle = <&swphy4>;
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk
index 30c1761134..869c466278 100644
--- a/target/linux/ath79/image/mikrotik.mk
+++ b/target/linux/ath79/image/mikrotik.mk
@@ -38,6 +38,16 @@ define Device/mikrotik_routerboard-922uags-5hpacd
 endef
 TARGET_DEVICES += mikrotik_routerboard-922uags-5hpacd
 
+define Device/mikrotik_routerboard-952ui-5ac2nd
+  $(Device/mikrotik_nor)
+  SOC := qca9533
+  DEVICE_MODEL := RouterBOARD 952Ui-5ac2nD (hAP ac lite)
+  DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct
+  IMAGE_SIZE := 16256k
+  SUPPORTED_DEVICES += rb-952ui-5ac2nd
+endef
+TARGET_DEVICES += mikrotik_routerboard-952ui-5ac2nd
+
 define Device/mikrotik_routerboard-962uigs-5hact2hnt
   $(Device/mikrotik_nor)
   SOC := qca9558
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
index f5b927ea96..baf6d00412 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
@@ -6,6 +6,13 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+mikrotik,routerboard-952ui-5ac2nd)
+	ucidef_set_led_netdev "port1" "port1" "green:port1" "eth1"
+	ucidef_set_led_switch "port2" "port2" "green:port2" "switch0" "0x10"
+	ucidef_set_led_switch "port3" "port3" "green:port3" "switch0" "0x08"
+	ucidef_set_led_switch "port4" "port4" "green:port4" "switch0" "0x04"
+	ucidef_set_led_switch "port5" "port5" "green:port5" "switch0" "0x02"
+	;;
 mikrotik,routerboard-lhg-2nd|\
 mikrotik,routerboard-mapl-2nd|\
 mikrotik,routerboard-wap-2nd)
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
index 999ce0dd99..9417e839e4 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
@@ -24,6 +24,11 @@ ath79_setup_interfaces()
 	mikrotik,routerboard-wapr-2nd)
 		ucidef_set_interface_lan "eth0"
 		;;
+	mikrotik,routerboard-952ui-5ac2nd)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
 	mikrotik,routerboard-962uigs-5hact2hnt)
 		ucidef_add_switch "switch0" \
 			"0 at eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 800ce11d51..b5651f15e8 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -35,6 +35,9 @@ case "$FIRMWARE" in
 	mikrotik,routerboard-wap-g-5hact2hnd)
 		caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 2)
 		;;
+	mikrotik,routerboard-952ui-5ac2nd)
+		caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 6)
+		;;
 	mikrotik,routerboard-962uigs-5hact2hnt)
 		caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 7)
 		;;
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 77cd47f6a0..32fc4a6f6d 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -12,6 +12,7 @@ case "$FIRMWARE" in
 "ath10k/cal-pci-0000:00:00.0.bin")
 	case $board in
 	mikrotik,routerboard-921gs-5hpacd-15s|\
+	mikrotik,routerboard-952ui-5ac2nd|\
 	mikrotik,routerboard-962uigs-5hact2hnt|\
 	mikrotik,routerboard-wap-g-5hact2hnd)
 		caldata_sysfsload_from_file $wlan_data 0x5000 0x844
-- 
2.24.3 (Apple Git-128)

More information about the openwrt-devel mailing list