Installing OpenWRt on the ZBT WG3526

[tmo]

Am 6. Mai 2022 11:30:29 MESZ schrieb Enrico Mioso <mrkiko.rs at gmail.com>:
>Hello!!
>
>In the next days i will install OpenWRt on a new ZBT WG3526 device. I used one in the past, but don't remember how the initial installation had to be performed.
>Furthermore, at that time I had "sighed" assistance - that I might not have today.
>
>My questions are:
>1) What's the best course of action to switch from stock OpenWrt-based firmware to OpenWrt?
>Should I use sysupgrade with -F -n or is another procedure recommended? Of course, before I would take backup of flash.
>2) If I should use bootloader to do this, may someone help me out extracting a curl command that would upload the firmware?
>Or is the bootloader working with lynx for upload? I know this is pretty much a matter of luck, and things can change in case-by-case basis.
>
>Thanks a lot,
>Enrico
>
>_______________________________________________
>openwrt-devel mailing list
>openwrt-devel at lists.openwrt.org
>https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Have you checked the installation instructions on the WG3526 devicepage in the OpenWrt wiki?