[PATCH] ramips: mt7621-dts: fix claiming rgmii2 pin group for EdgeRouter X SFP

Arınç ÜNAL arinc.unal at arinc9.com
Thu Mar 17 06:10:08 PDT 2022


For a TX->TX connected external phy to transmit/receive data, the rgmii2
pin group needs to be claimed with gpio function, at least for EdgeRouter X
SFP. We already claim the pin group under the pinctrl node with gpio
function on the gpio node on mt7621_ubnt_edgerouter-x.dtsi.

However, we should claim a pin group under its consumer node. It's the
ethernet node in this case, which we already claim the rgmii2 pin group
under it on mt7621.dtsi. Therefore, set the function as gpio on the rgmii2
node for EdgeRouter X SFP and get rid of claiming the rgmii2 pin group
under the pinctrl node. With this change, we also get to remove a
definition from mt7621_ubnt_edgerouter-x.dtsi which is specific to
EdgeRouter X SFP.

This change is tested on an EdgeRouter X SFP.

Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
---
 target/linux/ramips/dts/mt7621_ubnt_edgerouter-x-sfp.dts | 6 ++++++
 target/linux/ramips/dts/mt7621_ubnt_edgerouter-x.dtsi    | 6 +-----
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/target/linux/ramips/dts/mt7621_ubnt_edgerouter-x-sfp.dts b/target/linux/ramips/dts/mt7621_ubnt_edgerouter-x-sfp.dts
index 897aa90ea3..c00eb52c7c 100644
--- a/target/linux/ramips/dts/mt7621_ubnt_edgerouter-x-sfp.dts
+++ b/target/linux/ramips/dts/mt7621_ubnt_edgerouter-x-sfp.dts
@@ -59,6 +59,12 @@
 	};
 };
 
+&rgmii2_pins {
+	rgmii2 {
+		function = "gpio";
+	};
+};
+
 &switch0 {
 	ports {
 		port at 5 {
diff --git a/target/linux/ramips/dts/mt7621_ubnt_edgerouter-x.dtsi b/target/linux/ramips/dts/mt7621_ubnt_edgerouter-x.dtsi
index dcc84d7ccc..95cf3d2ccd 100644
--- a/target/linux/ramips/dts/mt7621_ubnt_edgerouter-x.dtsi
+++ b/target/linux/ramips/dts/mt7621_ubnt_edgerouter-x.dtsi
@@ -19,10 +19,6 @@
 	};
 };
 
-&ethernet {
-	pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
-};
-
 &gmac0 {
 	nvmem-cells = <&macaddr_factory_22>;
 	nvmem-cell-names = "mac-address";
@@ -114,7 +110,7 @@
 
 &state_default {
 	gpio {
-		groups = "uart2", "uart3", "pcie", "rgmii2", "jtag";
+		groups = "uart2", "uart3", "pcie", "jtag";
 		function = "gpio";
 	};
 };
-- 
2.25.1




More information about the openwrt-devel mailing list