[PATCH 21.02] ath79: add support for MikroTik RouterBOARD mAP lite
Thibaut VARÈNE
hacks at slashdirt.org
Thu Mar 10 03:01:29 PST 2022
The MikroTik RouterBOARD mAPL-2nd (sold as mAP Lite) is a small
2.4 GHz 802.11b/g/n PoE-capable AP.
See https://mikrotik.com/product/RBmAPL-2nD for more info.
Specifications:
- SoC: Qualcomm Atheros QCA9533
- RAM: 64 MB
- Storage: 16 MB NOR
- Wireless: Atheros AR9531 (SoC) 802.11b/g/n 2x2:2, 1.5 dBi antenna
- Ethernet: Atheros AR8229 (SoC), 1x 10/100 port, 802.3af/at PoE in
- 4 user-controllable LEDs:
· 1x power (green)
· 1x user (green)
· 1x lan (green)
· 1x wlan (green)
Flashing:
TFTP boot initramfs image and then perform sysupgrade. Follow common
MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.
Note: following 781d4bfb397cdd12ee0151eb66c577f470e3377d
The network setup avoids using the integrated switch and connects the
single Ethernet port directly. This way, link speed (10/100 Mbps) is
properly reported by eth0.
Signed-off-by: Thibaut VARÈNE <hacks at slashdirt.org>
(cherry picked from commit eb38af788180d624e5b37aa5db1fe3766b138dc8)
---
.../qca9533_mikrotik_routerboard-mapl-2nd.dts | 68 +++++++++++++++++++
target/linux/ath79/image/mikrotik.mk | 8 +++
.../mikrotik/base-files/etc/board.d/01_leds | 3 +-
.../base-files/etc/board.d/02_network | 2 +
.../etc/hotplug.d/firmware/10-ath9k-eeprom | 1 +
5 files changed, 81 insertions(+), 1 deletion(-)
create mode 100644 target/linux/ath79/dts/qca9533_mikrotik_routerboard-mapl-2nd.dts
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-mapl-2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-mapl-2nd.dts
new file mode 100644
index 0000000000..e2442f0095
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-mapl-2nd.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_mikrotik_routerboard-16m.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-mapl-2nd", "qca,qca9533";
+ model = "MikroTik RouterBOARD mAPL-2nD (mAP lite)";
+
+ aliases {
+ led-boot = &led_user;
+ led-failsafe = &led_user;
+ led-running = &led_user;
+ led-upgrade = &led_user;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_power_pin &led_lan_pin>;
+
+ power {
+ label = "green:power";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_user: user {
+ label = "green:user";
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&pinmux {
+ led_lan_pin: pinmux_led_lan_pin {
+ pinctrl-single,bits = <0x4 0x0 0xff>;
+ };
+
+ led_power_pin: pinmux_led_power_pin {
+ pinctrl-single,bits = <0x10 0x0 0xff00>;
+ };
+};
diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk
index 4256f77379..b2c7000419 100644
--- a/target/linux/ath79/image/mikrotik.mk
+++ b/target/linux/ath79/image/mikrotik.mk
@@ -45,6 +45,14 @@ define Device/mikrotik_routerboard-lhg-2nd
endef
TARGET_DEVICES += mikrotik_routerboard-lhg-2nd
+define Device/mikrotik_routerboard-mapl-2nd
+ $(Device/mikrotik_nor)
+ SOC := qca9533
+ DEVICE_MODEL := RouterBOARD mAPL-2nD (mAP lite)
+ IMAGE_SIZE := 16256k
+endef
+TARGET_DEVICES += mikrotik_routerboard-mapl-2nd
+
define Device/mikrotik_routerboard-sxt-5nd-r2
$(Device/mikrotik_nand)
SOC := ar9344
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
index 0d3209c2e3..e95c5830e2 100755
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
@@ -7,7 +7,8 @@ board_config_update
board=$(board_name)
case "$board" in
-mikrotik,routerboard-lhg-2nd)
+mikrotik,routerboard-lhg-2nd|\
+mikrotik,routerboard-mapl-2nd)
ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
;;
mikrotik,routerboard-wapr-2nd)
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
index bd249e0b86..bf8b9bdac2 100755
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
@@ -18,6 +18,7 @@ ath79_setup_interfaces()
mikrotik,routerboard-912uag-2hpnd|\
mikrotik,routerboard-921gs-5hpacd-15s|\
mikrotik,routerboard-lhg-2nd|\
+ mikrotik,routerboard-mapl-2nd|\
mikrotik,routerboard-sxt-5nd-r2|\
mikrotik,routerboard-wap-g-5hact2hnd|\
mikrotik,routerboard-wapr-2nd)
@@ -41,6 +42,7 @@ ath79_setup_macs()
mikrotik,routerboard-912uag-2hpnd|\
mikrotik,routerboard-921gs-5hpacd-15s|\
mikrotik,routerboard-lhg-2nd|\
+ mikrotik,routerboard-mapl-2nd|\
mikrotik,routerboard-sxt-5nd-r2|\
mikrotik,routerboard-wap-g-5hact2hnd|\
mikrotik,routerboard-wapr-2nd)
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index ae0c94d8ec..eca25b69de 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -29,6 +29,7 @@ case "$FIRMWARE" in
mikrotik,routerboard-wapr-2nd)
caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" +1)
;;
+ mikrotik,routerboard-mapl-2nd|\
mikrotik,routerboard-wap-g-5hact2hnd)
caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" +2)
;;
--
2.24.3 (Apple Git-128)
More information about the openwrt-devel
mailing list