[PATCH V3] ipq40xx: fix BDF file for pcie wifi chip on the GL.Inet GL-B2200

[Enrico Mioso]

After the switch to pre-calibration, ath10k would fail to initialize
the PCIE Wi-Fi on the GL-B200 as follows:

ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
ath10k_pci 0000:01:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
[...]
ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=GL-B2200 from ath10k/QCA9888/hw2.0/board-2.bin
ath10k_pci 0000:01:00.0: failed to fetch board-2.bin or board.bin from ath10k/QCA9888/hw2.0
ath10k_pci 0000:01:00.0: failed to fetch board file: -12
ath10k_pci 0000:01:00.0: could not probe fw (-12)

Repackage the BDF file after renaming relevant fields and files to
allow for the Wi-Fi interface to start again.

Fixes: 80d34d9d593 ("ipq40xx: document pcie wifi chip on the GL.Inet GL-B2200")
CC: Christian Lamparter <chunkeey at gmail.com>
CC: Robert Marko <robimarko at gmail.com>
Signed-off-by: Enrico Mioso <mrkiko.rs at gmail.com>
---
 .../ipq-wifi/board-glinet_gl-b2200.qca9888    | Bin 12200 -> 12164 bytes
 1 file changed, 0 insertions(+), 0 deletions(-)

diff --git a/package/firmware/ipq-wifi/board-glinet_gl-b2200.qca9888 b/package/firmware/ipq-wifi/board-glinet_gl-b2200.qca9888
index 4f0a521f35935d4be1fb01b66dd9954a48eade52..f0a493ace340de0fe84d89d46cc07209df1b6883 100644
GIT binary patch
delta 79
zcmZ1x-x5DT!X-nW0SwH5WKwCdZ9#ITPEu~BZgNIufo^7stpS*ql%H6X0^%B)>69fF
YWhUm8*t+}ZIvE)m806+|Y|zjL0EmDWzyJUM

delta 115
zcmZpPUlBh+BBMv20Ssb*WKwCdZ9#ITPFZSRN`8^8p_xUpPD*N7W^$^nfq|)+PH|~c
qab<ByYOXF+g#i#CiNe(aMavS4G86MkY~6iyos5hO3^vAS=mP*4B_x6X

-- 
2.36.0