[PATCH 4/4] zynq: switch to kernel 5.10
luaraneda at gmail.com
Thu Oct 7 19:27:41 PDT 2021
Thanks for testing
On Tue, Oct 5, 2021 at 5:57 PM Adrian Schmutzler
<mail at adrianschmutzler.de> wrote:
> Won't build for me (with build bot settings and all packages installed):
I usually build a minimal configuration with a couple of extra
packages that I need as building all of them is not feasible on my
current development environment.
>From looking at the log snippet on your e-mail, it seems to be failing
to build mac80211 or one of its components / drivers.
My current build configuration does not include this, that's probably
the reason I didn't catch it.
A also looked at the log of the build bots and there seems to be
something odd going on even on kernel 5.4.
I'll investigate the error and attempt to fix it for 5.10 so the build is clean.
A couple of messages from the build bots on kernel 5.4:
> ERROR: module '/builder/shared-workdir/build/build_dir/target-arm_cortex-a9+neon_musl_eabi/linux-zynq/backports-5.10.68-1/drivers/net/wireless/intersil/orinoco/orinoco.ko' is missing.
> make: *** [Makefile:564: /builder/shared-workdir/build/bin/targets/zynq/generic/packages/kmod-hermes_5.4.150+5.10.68-1-1_arm_cortex-a9_neon.ipk] Error 1
> make: Leaving directory '/builder/shared-workdir/build/package/kernel/mac80211'
> time: package/kernel/mac80211/compile#830.81#47.71#222.36
> ERROR: package/kernel/mac80211 failed to build.
But then the mac80211 package is available for download at the
More information about the openwrt-devel