[PATCH 21.02 00/11] ramips: mt7621: backport support for 9 devices

Tue Jun 8 13:56:02 PDT 2021

Hi again,

> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org]
> On Behalf Of Adrian Schmutzler
> Sent: Dienstag, 8. Juni 2021 21:25
> To: 'Petr Štetiar' <ynezz at true.cz>; openwrt-devel at lists.openwrt.org
> Subject: RE: [PATCH 21.02 00/11] ramips: mt7621: backport support for 9
> devices
> 
> Hi Petr,
> 
> > -----Original Message-----
> > From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org]
> > On Behalf Of Petr Štetiar
> > Sent: Dienstag, 8. Juni 2021 11:45
> > To: openwrt-devel at lists.openwrt.org
> > Cc: Petr Štetiar <ynezz at true.cz>
> > Subject: [PATCH 21.02 00/11] ramips: mt7621: backport support for 9
> > devices
> >
> > Hi,
> >
> > Tee has asked today about backport for Linksys EA8100v1 on IRC, I've
> > noticed another such request in PR#4236[1] and decided to backport
> > most of the new devices as it saves time during rebasing/cherry-picks,
> review etc.
> >
> > All those backports are straight and clean cherry picks from master,
> > no modifications has been done, just simple Makefile merge conflict
> > has been resolved on "firmware-utils: zytrx: Add util for ZyXEL specific
> header".
> >
> > I've just build tested[2] that testing/mt7621-21.02-rc2-backports[3]
> > branch and provided all build artifacts like firmware images and
> > packages for download[4] to make testing easier.
> >
> > Would be nice to get some feedback and ideally your `Tested-by:` for
> > particular device. Thanks!
> >
> 
> Thanks for taking of this.
> 
> I've not kept track of the backport-relevant changes over the last months.
> However, I did a quick scan of /target/linux/ramips's git history. The only
> config-wise thing I found was the selective dependency for kmod-usb-serial:
> https://github.com/openwrt/openwrt/commit/9397b22df1473f315552578b5
> 8322db7f7750361

Since it was applying without any issues, I've just quickly cherry-picked the commit, so the kmod-usb-serial issue is resolved.

Best

Adrian

> 
> This was only added in master and affects ZyXEL NR7101 as far as I can tell,
> which will lack kmod-usb-serial in 21.02 unless added manually.
> Of course, we might as well just cherry-pick the referenced commit if it
> applies without too much work. In any case, not a big problem.
> 
> Note that I only checked config-/DTS-related patches, I don't know if there
> are any driver- or kernel-related changes that would cause problems.
> 
> Best
> 
> Adrian
> 
> 
> >
> > 1. https://github.com/openwrt/openwrt/pull/4236
> > 2. https://gitlab.com/ynezz/openwrt/-/jobs/1326795722
> > 3.
> > https://git.openwrt.org/?p=openwrt/staging/ynezz.git;a=shortlog;h=refs
> > /he ads/testing/mt7621-21.02-rc2-backports
> > 4.
> > https://foo.true.cz/minio/openwrt/staging-builds/testing-mt7621-21-02-
> > rc2-backports/2c462a29/ramips-mt7621/bin
> >
> >
> > Cheers,
> >
> > Petr
> >
> > Aashish Kulkarni (1):
> >   ramips: add support for Linksys E5600
> >
> > Andreas Böhler (1):
> >   ramips: Add support for SERCOMM NA502
> >
> > Bjørn Mork (2):
> >   firmware-utils: zytrx: Add util for ZyXEL specific header
> >   ramips: mt7621: Add support for ZyXEL NR7101
> >
> > Chukun Pan (1):
> >   ramips: add support for JCG Q20
> >
> > Georgi Vlaev (1):
> >   ramips: add support for TP-Link Archer C6U v1 (EU)
> >
> > Jonathan Sturges (1):
> >   ramips: add support for Amped Wireless ALLY router and extender
> >
> > Kevin Darbyshire-Bryant (1):
> >   firmware-utils: fix coverity zytrx.c resource leak
> >
> > Leon M. George (1):
> >   ramips: add support for cudy WR2100
> >
> > Tee Hao Wei (1):
> >   ramips: add support for Linksys EA8100 v1
> >
> > Vinay Patil (1):
> >   ramips: add support for TP-Link Archer A6 v3
> >
> >  package/boot/uboot-envtools/files/ramips      |  13 +
> >  .../dts/mt7621_ampedwireless_ally-00x19k.dts  |  21 ++
> > .../dts/mt7621_ampedwireless_ally-r1900k.dts  |  32 +++
> > .../ramips/dts/mt7621_ampedwireless_ally.dtsi | 179 ++++++++++++++
> >  .../linux/ramips/dts/mt7621_cudy_wr2100.dts   | 201 +++++++++++++++
> >  target/linux/ramips/dts/mt7621_jcg_q20.dts    | 175 ++++++++++++++
> >  .../linux/ramips/dts/mt7621_linksys_e5600.dts | 182 ++++++++++++++
> >  .../ramips/dts/mt7621_linksys_ea8100-v1.dts   |   8 +
> >  .../linux/ramips/dts/mt7621_sercomm_na502.dts | 212
> ++++++++++++++++
> > .../ramips/dts/mt7621_tplink_archer-a6-v3.dts | 188 +++++++++++++++
> >  .../dts/mt7621_tplink_archer-c6u-v1.dts       | 213 ++++++++++++++++
> >  .../linux/ramips/dts/mt7621_zyxel_nr7101.dts  | 164 +++++++++++++
> >  target/linux/ramips/image/mt7621.mk           | 148 ++++++++++++
> >  .../mt7621/base-files/etc/board.d/01_leds     |  18 +-
> >  .../mt7621/base-files/etc/board.d/02_network  |  48 ++--
> >  .../base-files/etc/board.d/03_gpio_switches   |   3 +
> >  .../etc/hotplug.d/ieee80211/10_fix_wifi_mac   |   8 +-
> >  .../mt7621/base-files/etc/init.d/bootcount    |   9 +-
> >  .../mt7621/base-files/lib/upgrade/platform.sh |  18 ++
> >  tools/firmware-utils/Makefile                 |   1 +
> >  tools/firmware-utils/src/tplink-safeloader.c  |  75 +++++-
> >  tools/firmware-utils/src/zytrx.c              | 228 ++++++++++++++++++
> >  22 files changed, 2125 insertions(+), 19 deletions(-)  create mode
> > 100644 target/linux/ramips/dts/mt7621_ampedwireless_ally-00x19k.dts
> >  create mode 100644 target/linux/ramips/dts/mt7621_ampedwireless_ally-
> > r1900k.dts
> >  create mode 100644
> > target/linux/ramips/dts/mt7621_ampedwireless_ally.dtsi
> >  create mode 100644 target/linux/ramips/dts/mt7621_cudy_wr2100.dts
> >  create mode 100644 target/linux/ramips/dts/mt7621_jcg_q20.dts
> >  create mode 100644 target/linux/ramips/dts/mt7621_linksys_e5600.dts
> >  create mode 100644
> > target/linux/ramips/dts/mt7621_linksys_ea8100-v1.dts
> >  create mode 100644 target/linux/ramips/dts/mt7621_sercomm_na502.dts
> >  create mode 100644 target/linux/ramips/dts/mt7621_tplink_archer-a6-
> > v3.dts
> >  create mode 100644 target/linux/ramips/dts/mt7621_tplink_archer-c6u-
> > v1.dts
> >  create mode 100644 target/linux/ramips/dts/mt7621_zyxel_nr7101.dts
> >  create mode 100644 tools/firmware-utils/src/zytrx.c
> >
> >
> > _______________________________________________
> > openwrt-devel mailing list
> > openwrt-devel at lists.openwrt.org
> > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: openpgp-digital-signature.asc
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.openwrt.org/pipermail/openwrt-devel/attachments/20210608/611b16f8/attachment.sig>