[PATCH v4 01/10] dt-bindings: mtd: partitions: add OpenWrt defined U-Boot Image

Bjørn Mork bjorn at mork.no
Wed Jan 20 12:36:44 EST 2021


Add devicetree bindings for vendor specific variants of U-Boot
Images, as defined by OpenWrt.

Signed-off-by: Bjørn Mork <bjorn at mork.no>
---
 .../mtd/partitions/openwrt,uimage.yaml        |  91 +++++++++
 .../dt-bindings/mtd/partitions/uimage.h       | 191 ++++++++++++++++++
 2 files changed, 282 insertions(+)
 create mode 100644 target/linux/generic/files/Documentation/devicetree/bindings/mtd/partitions/openwrt,uimage.yaml
 create mode 100644 target/linux/generic/files/include/dt-bindings/mtd/partitions/uimage.h

diff --git a/target/linux/generic/files/Documentation/devicetree/bindings/mtd/partitions/openwrt,uimage.yaml b/target/linux/generic/files/Documentation/devicetree/bindings/mtd/partitions/openwrt,uimage.yaml
new file mode 100644
index 000000000000..d052ab1fc981
--- /dev/null
+++ b/target/linux/generic/files/Documentation/devicetree/bindings/mtd/partitions/openwrt,uimage.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/openwrt,uimage.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OpenWrt variations of U-Boot Image partitions
+
+maintainers:
+  - Bjørn Mork <bjorn at mork.no>
+
+description: |
+  The image format defined by the boot loader "Das U-Boot" is often
+  modified or extended by device vendors. This defines a few optional
+  properties which can be used to describe such modifications.
+
+# partition.txt defines common properties, but has not yet been
+# converted to YAML
+#allOf:
+#  - $ref: ../partition.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - openwrt,uimage
+      - const: denx,uimage
+
+  openwrt,padding:
+    description: Number of padding bytes between header and data
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  openwrt,ih-magic:
+    description: U-Boot Image Header magic number.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x27051956 # IH_MAGIC
+
+  openwrt,ih-type:
+    description: U-Boot Image type
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2 # IH_TYPE_KERNEL
+
+  openwrt,offset:
+    description:
+      Offset between partition start and U-Boot Image in bytes
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  openwrt,partition-magic:
+    description:
+      Magic number found at the start of the partition. Will only be
+      validated if both this property and openwrt,offset is non-zero
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+required:
+  - compatible
+  - reg
+
+#unevaluatedProperties: false
+additionalProperties: false
+
+examples:
+  - |
+    // device with non-default magic
+    partition at 300000 {
+          compatible = "openwrt,uimage", "denx,uimage";
+          reg = <0x00300000 0xe80000>;
+          label = "firmware";
+          openwrt,ih-magic = <0x4e474520>;
+    };
+  - |
+    // device with U-Boot Image at an offset, with a partition magic value
+    partition at 70000 {
+          compatible = "openwrt,uimage", "denx,uimage";
+          reg = <0x00070000 0x00790000>;
+          label = "firmware";
+          openwrt,offset = <20>;
+          openwrt,partition-magic = <0x43535953>;
+    };
+  - |
+    // device using a non-default image type
+    #include "dt-bindings/mtd/partitions/uimage.h"
+    partition at 6c0000 {
+          compatible = "openwrt,uimage", "denx,uimage";
+          reg = <0x6c0000 0x1900000>;
+          label = "firmware";
+          openwrt,ih-magic = <0x33373033>;
+          openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
+    };
diff --git a/target/linux/generic/files/include/dt-bindings/mtd/partitions/uimage.h b/target/linux/generic/files/include/dt-bindings/mtd/partitions/uimage.h
new file mode 100644
index 000000000000..29eec38dd282
--- /dev/null
+++ b/target/linux/generic/files/include/dt-bindings/mtd/partitions/uimage.h
@@ -0,0 +1,191 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *    *** IMPORTANT ***
+ * This file is not only included from C-code but also from devicetree source
+ * files. As such this file MUST only contain comments and defines.
+ *
+ * Based on image.h from U-Boot which is
+ * (C) Copyright 2008 Semihalf
+ * (C) Copyright 2000-2005 Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ */
+
+#ifndef __UIMAGE_H__
+#define __UIMAGE_H__
+
+/*
+ * Operating System Codes
+ *
+ * The following are exposed to uImage header.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
+ */
+#define	IH_OS_INVALID		0	/* Invalid OS	*/
+#define	IH_OS_OPENBSD		1	/* OpenBSD	*/
+#define	IH_OS_NETBSD		2	/* NetBSD	*/
+#define	IH_OS_FREEBSD		3	/* FreeBSD	*/
+#define	IH_OS_4_4BSD		4	/* 4.4BSD	*/
+#define	IH_OS_LINUX		5	/* Linux	*/
+#define	IH_OS_SVR4		6	/* SVR4		*/
+#define	IH_OS_ESIX		7	/* Esix		*/
+#define	IH_OS_SOLARIS		8	/* Solaris	*/
+#define	IH_OS_IRIX		9	/* Irix		*/
+#define	IH_OS_SCO	       10	/* SCO		*/
+#define	IH_OS_DELL	       11	/* Dell		*/
+#define	IH_OS_NCR	       12	/* NCR		*/
+#define	IH_OS_LYNXOS	       13	/* LynxOS	*/
+#define	IH_OS_VXWORKS	       14	/* VxWorks	*/
+#define	IH_OS_PSOS	       15	/* pSOS		*/
+#define	IH_OS_QNX	       16	/* QNX		*/
+#define	IH_OS_U_BOOT	       17	/* Firmware	*/
+#define	IH_OS_RTEMS	       18	/* RTEMS	*/
+#define	IH_OS_ARTOS	       19	/* ARTOS	*/
+#define	IH_OS_UNITY	       20	/* Unity OS	*/
+#define	IH_OS_INTEGRITY	       21	/* INTEGRITY	*/
+#define	IH_OS_OSE	       22	/* OSE		*/
+#define	IH_OS_PLAN9	       23	/* Plan 9	*/
+#define	IH_OS_OPENRTOS	       24	/* OpenRTOS	*/
+#define	IH_OS_ARM_TRUSTED_FIRMWARE 25    /* ARM Trusted Firmware */
+#define	IH_OS_TEE	       26	/* Trusted Execution Environment */
+#define	IH_OS_OPENSBI	       27	/* RISC-V OpenSBI */
+#define	IH_OS_EFI	       28	/* EFI Firmware (e.g. GRUB2) */
+
+/*
+ * CPU Architecture Codes (supported by Linux)
+ *
+ * The following are exposed to uImage header.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
+ */
+#define	IH_ARCH_INVALID		0	/* Invalid CPU	*/
+#define	IH_ARCH_ALPHA		1	/* Alpha	*/
+#define	IH_ARCH_ARM		2	/* ARM		*/
+#define	IH_ARCH_I386		3	/* Intel x86	*/
+#define	IH_ARCH_IA64		4	/* IA64		*/
+#define	IH_ARCH_MIPS		5	/* MIPS		*/
+#define	IH_ARCH_MIPS64		6	/* MIPS	 64 Bit */
+#define	IH_ARCH_PPC		7	/* PowerPC	*/
+#define	IH_ARCH_S390		8	/* IBM S390	*/
+#define	IH_ARCH_SH		9	/* SuperH	*/
+#define	IH_ARCH_SPARC	       10	/* Sparc	*/
+#define	IH_ARCH_SPARC64	       11	/* Sparc 64 Bit */
+#define	IH_ARCH_M68K	       12	/* M68K		*/
+#define	IH_ARCH_NIOS	       13	/* Nios-32	*/
+#define	IH_ARCH_MICROBLAZE     14	/* MicroBlaze   */
+#define	IH_ARCH_NIOS2	       15	/* Nios-II	*/
+#define	IH_ARCH_BLACKFIN       16	/* Blackfin	*/
+#define	IH_ARCH_AVR32	       17	/* AVR32	*/
+#define	IH_ARCH_ST200	       18	/* STMicroelectronics ST200  */
+#define	IH_ARCH_SANDBOX	       19	/* Sandbox architecture (test only) */
+#define	IH_ARCH_NDS32	       20	/* ANDES Technology - NDS32  */
+#define	IH_ARCH_OPENRISC       21	/* OpenRISC 1000  */
+#define	IH_ARCH_ARM64	       22	/* ARM64	*/
+#define	IH_ARCH_ARC	       23	/* Synopsys DesignWare ARC */
+#define	IH_ARCH_X86_64	       24	/* AMD x86_64, Intel and Via */
+#define	IH_ARCH_XTENSA	       25	/* Xtensa	*/
+#define	IH_ARCH_RISCV	       26	/* RISC-V */
+
+/*
+ * Image Types
+ *
+ * "Standalone Programs" are directly runnable in the environment
+ *	provided by U-Boot; it is expected that (if they behave
+ *	well) you can continue to work in U-Boot after return from
+ *	the Standalone Program.
+ * "OS Kernel Images" are usually images of some Embedded OS which
+ *	will take over control completely. Usually these programs
+ *	will install their own set of exception handlers, device
+ *	drivers, set up the MMU, etc. - this means, that you cannot
+ *	expect to re-enter U-Boot except by resetting the CPU.
+ * "RAMDisk Images" are more or less just data blocks, and their
+ *	parameters (address, size) are passed to an OS kernel that is
+ *	being started.
+ * "Multi-File Images" contain several images, typically an OS
+ *	(Linux) kernel image and one or more data images like
+ *	RAMDisks. This construct is useful for instance when you want
+ *	to boot over the network using BOOTP etc., where the boot
+ *	server provides just a single image file, but you want to get
+ *	for instance an OS kernel and a RAMDisk image.
+ *
+ *	"Multi-File Images" start with a list of image sizes, each
+ *	image size (in bytes) specified by an "uint32_t" in network
+ *	byte order. This list is terminated by an "(uint32_t)0".
+ *	Immediately after the terminating 0 follow the images, one by
+ *	one, all aligned on "uint32_t" boundaries (size rounded up to
+ *	a multiple of 4 bytes - except for the last file).
+ *
+ * "Firmware Images" are binary images containing firmware (like
+ *	U-Boot or FPGA images) which usually will be programmed to
+ *	flash memory.
+ *
+ * "Script files" are command sequences that will be executed by
+ *	U-Boot's command interpreter; this feature is especially
+ *	useful when you configure U-Boot to use a real shell (hush)
+ *	as command interpreter (=> Shell Scripts).
+ *
+ * The following are exposed to uImage header.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
+ */
+#define	IH_TYPE_INVALID		0	/* Invalid Image		*/
+#define	IH_TYPE_STANDALONE	1	/* Standalone Program		*/
+#define	IH_TYPE_KERNEL		2	/* OS Kernel Image		*/
+#define	IH_TYPE_RAMDISK		3	/* RAMDisk Image		*/
+#define	IH_TYPE_MULTI		4	/* Multi-File Image		*/
+#define	IH_TYPE_FIRMWARE	5	/* Firmware Image		*/
+#define	IH_TYPE_SCRIPT		6	/* Script file			*/
+#define	IH_TYPE_FILESYSTEM	7	/* Filesystem Image (any type)	*/
+#define	IH_TYPE_FLATDT		8	/* Binary Flat Device Tree Blob	*/
+#define	IH_TYPE_KWBIMAGE	9	/* Kirkwood Boot Image		*/
+#define	IH_TYPE_IMXIMAGE       10	/* Freescale IMXBoot Image	*/
+#define	IH_TYPE_UBLIMAGE       11	/* Davinci UBL Image		*/
+#define	IH_TYPE_OMAPIMAGE      12	/* TI OMAP Config Header Image	*/
+#define	IH_TYPE_AISIMAGE       13	/* TI Davinci AIS Image		*/
+	/* OS Kernel Image, can run from any load address */
+#define	IH_TYPE_KERNEL_NOLOAD  14
+#define	IH_TYPE_PBLIMAGE       15	/* Freescale PBL Boot Image	*/
+#define	IH_TYPE_MXSIMAGE       16	/* Freescale MXSBoot Image	*/
+#define	IH_TYPE_GPIMAGE	       17	/* TI Keystone GPHeader Image	*/
+#define	IH_TYPE_ATMELIMAGE     18	/* ATMEL ROM bootable Image	*/
+#define	IH_TYPE_SOCFPGAIMAGE   19	/* Altera SOCFPGA CV/AV Preloader */
+#define	IH_TYPE_X86_SETUP      20	/* x86 setup.bin Image		*/
+#define	IH_TYPE_LPC32XXIMAGE   21	/* x86 setup.bin Image		*/
+#define	IH_TYPE_LOADABLE       22	/* A list of typeless images	*/
+#define	IH_TYPE_RKIMAGE	       23	/* Rockchip Boot Image		*/
+#define	IH_TYPE_RKSD	       24	/* Rockchip SD card		*/
+#define	IH_TYPE_RKSPI	       25	/* Rockchip SPI image		*/
+#define	IH_TYPE_ZYNQIMAGE      26	/* Xilinx Zynq Boot Image */
+#define	IH_TYPE_ZYNQMPIMAGE    27	/* Xilinx ZynqMP Boot Image */
+#define	IH_TYPE_ZYNQMPBIF      28	/* Xilinx ZynqMP Boot Image (bif) */
+#define	IH_TYPE_FPGA	       29	/* FPGA Image */
+#define	IH_TYPE_VYBRIDIMAGE    30	/* VYBRID .vyb Image */
+#define	IH_TYPE_TEE            31	/* Trusted Execution Environment OS Image */
+#define	IH_TYPE_FIRMWARE_IVT   32	/* Firmware Image with HABv4 IVT */
+#define	IH_TYPE_PMMC           33	/* TI Power Management Micro-Controller Firmware */
+#define	IH_TYPE_STM32IMAGE     34	/* STMicroelectronics STM32 Image */
+#define	IH_TYPE_SOCFPGAIMAGE_V1 35	/* Altera SOCFPGA A10 Preloader	*/
+#define	IH_TYPE_MTKIMAGE       36	/* MediaTek BootROM loadable Image */
+#define	IH_TYPE_IMX8MIMAGE     37	/* Freescale IMX8MBoot Image	*/
+#define	IH_TYPE_IMX8IMAGE      38	/* Freescale IMX8Boot Image	*/
+#define	IH_TYPE_COPRO	       39	/* Coprocessor Image for remoteproc*/
+
+
+/*
+ * Compression Types
+ *
+ * The following are exposed to uImage header.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
+ */
+#define	IH_COMP_NONE		0	/*  No	 Compression Used	*/
+#define	IH_COMP_GZIP		1	/* gzip	 Compression Used	*/
+#define	IH_COMP_BZIP2		2	/* bzip2 Compression Used	*/
+#define	IH_COMP_LZMA		3	/* lzma  Compression Used	*/
+#define	IH_COMP_LZO		4	/* lzo   Compression Used	*/
+#define	IH_COMP_LZ4		5	/* lz4   Compression Used	*/
+
+
+#define LZ4F_MAGIC	0x184D2204	/* LZ4 Magic Number		*/
+#define IH_MAGIC	0x27051956	/* Image Magic Number		*/
+#define IH_NMLEN		32	/* Image Name Length		*/
+
+#endif	/* __UIMAGE_H__ */
-- 
2.20.1




More information about the openwrt-devel mailing list