[PATCH v2] ramips: overwrite reset gpio properties in DIR-860L DTS

Stijn Segers foss at volatilesystems.org
Thu Feb 18 08:10:57 EST 2021


As suggested by Sergio, this adds GPIOs 19 and 8 explicitly into the
DIR-860L DTS, so the PCI-E ports get reset and the N radio (radio1)
on PCI-E port 1 comes up reliably.

Fixes the following error that popped up in dmesg:

    [    1.638942] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK)

Suggested-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
Signed-off-by: Stijn Segers <foss at volatilesystems.org>
---
 target/linux/ramips/dts/mt7621_dlink_dir-860l-b1.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-860l-b1.dts b/target/linux/ramips/dts/mt7621_dlink_dir-860l-b1.dts
index 5d1c336736..f843f62801 100644
--- a/target/linux/ramips/dts/mt7621_dlink_dir-860l-b1.dts
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-860l-b1.dts
@@ -143,6 +143,9 @@
 
 &pcie {
 	status = "okay";
+
+	reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
+		      <&gpio 8 GPIO_ACTIVE_LOW>;
 };
 
 &pcie0 {
-- 
2.30.0




More information about the openwrt-devel mailing list