[PATCH 11/13] realtek: drop downstream platform

Sander Vanheule sander at svanheule.net
Wed Dec 8 13:43:07 PST 2021


The original platform is no longer used by any drivers, but was replaced
by MACH_REALTEK_RTL. Drop the old platform patch and unused files.

Co-developed-by: INAGAKI Hiroshi <musashino.open at gmail.com>
Signed-off-by: INAGAKI Hiroshi <musashino.open at gmail.com>
Signed-off-by: Sander Vanheule <sander at svanheule.net>
---
 .../mips/include/asm/mach-rtl838x/ioremap.h   |  29 ---
 .../files-5.10/arch/mips/rtl838x/Makefile     |   5 -
 .../files-5.10/arch/mips/rtl838x/Platform     |   5 -
 .../files-5.10/arch/mips/rtl838x/prom.c       | 183 ------------------
 .../files-5.10/arch/mips/rtl838x/setup.c      |  76 --------
 .../300-mips-add-rtl838x-platform.patch       |  39 ----
 6 files changed, 337 deletions(-)
 delete mode 100644 target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/ioremap.h
 delete mode 100644 target/linux/realtek/files-5.10/arch/mips/rtl838x/Makefile
 delete mode 100644 target/linux/realtek/files-5.10/arch/mips/rtl838x/Platform
 delete mode 100644 target/linux/realtek/files-5.10/arch/mips/rtl838x/prom.c
 delete mode 100644 target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c
 delete mode 100644 target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch

diff --git a/target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/ioremap.h b/target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/ioremap.h
deleted file mode 100644
index c49a09579233..000000000000
--- a/target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/ioremap.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#ifndef RTL838X_IOREMAP_H_
-#define RTL838X_IOREMAP_H_
-
-static inline int is_rtl838x_internal_registers(phys_addr_t offset)
-{
-	/* IO-Block */
-	if (offset >= 0xb8000000 && offset < 0xb9000000)
-		return 1;
-	/* Switch block */
-	if (offset >= 0xbb000000 && offset < 0xbc000000)
-		return 1;
-	return 0;
-}
-
-static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
-					 unsigned long flags)
-{
-	if (is_rtl838x_internal_registers(offset))
-		return (void __iomem *)offset;
-	return NULL;
-}
-
-static inline int plat_iounmap(const volatile void __iomem *addr)
-{
-	return is_rtl838x_internal_registers((unsigned long)addr);
-}
-
-#endif
diff --git a/target/linux/realtek/files-5.10/arch/mips/rtl838x/Makefile b/target/linux/realtek/files-5.10/arch/mips/rtl838x/Makefile
deleted file mode 100644
index a9d1666d4652..000000000000
--- a/target/linux/realtek/files-5.10/arch/mips/rtl838x/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the rtl838x specific parts of the kernel
-#
-
-obj-y := setup.o prom.o
diff --git a/target/linux/realtek/files-5.10/arch/mips/rtl838x/Platform b/target/linux/realtek/files-5.10/arch/mips/rtl838x/Platform
deleted file mode 100644
index f9f189b68945..000000000000
--- a/target/linux/realtek/files-5.10/arch/mips/rtl838x/Platform
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Realtek RTL838x SoCs
-#
-cflags-$(CONFIG_RTL838X)   += -I$(srctree)/arch/mips/include/asm/mach-rtl838x/
-load-$(CONFIG_RTL838X)     += 0xffffffff80000000
diff --git a/target/linux/realtek/files-5.10/arch/mips/rtl838x/prom.c b/target/linux/realtek/files-5.10/arch/mips/rtl838x/prom.c
deleted file mode 100644
index aea53c545159..000000000000
--- a/target/linux/realtek/files-5.10/arch/mips/rtl838x/prom.c
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * prom.c
- * Early intialization code for the Realtek RTL838X SoC
- *
- * based on the original BSP by
- * Copyright (C) 2006-2012 Tony Wu (tonywu at realtek.com)
- * Copyright (C) 2020 B. Koblitz
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/of_fdt.h>
-#include <linux/libfdt.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <asm/cpu.h>
-
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-
-extern char arcs_cmdline[];
-extern const char __appended_dtb;
-
-struct rtl83xx_soc_info soc_info;
-const void *fdt;
-
-const char *get_system_type(void)
-{
-	return soc_info.name;
-}
-
-void __init prom_free_prom_memory(void)
-{
-
-}
-
-void __init device_tree_init(void)
-{
-	if (!fdt_check_header(&__appended_dtb)) {
-		fdt = &__appended_dtb;
-		pr_info("Using appended Device Tree.\n");
-	}
-	initial_boot_params = (void *)fdt;
-	unflatten_and_copy_device_tree();
-}
-
-static void __init prom_init_cmdline(void)
-{
-	int argc = fw_arg0;
-	char **argv = (char **) KSEG1ADDR(fw_arg1);
-	int i;
-
-	arcs_cmdline[0] = '\0';
-
-	for (i = 0; i < argc; i++) {
-		char *p = (char *) KSEG1ADDR(argv[i]);
-
-		if (CPHYSADDR(p) && *p) {
-			strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
-			strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
-		}
-	}
-	pr_info("Kernel command line: %s\n", arcs_cmdline);
-}
-
-void __init identify_rtl9302(void)
-{
-	switch (sw_r32(RTL93XX_MODEL_NAME_INFO) & 0xfffffff0) {
-	case 0x93020810:
-		soc_info.name = "RTL9302A 12x2.5G";
-		break;
-	case 0x93021010:
-		soc_info.name = "RTL9302B 8x2.5G";
-		break;
-	case 0x93021810:
-		soc_info.name = "RTL9302C 16x2.5G";
-		break;
-	case 0x93022010:
-		soc_info.name = "RTL9302D 24x2.5G";
-		break;
-	case 0x93020800:
-		soc_info.name = "RTL9302A";
-		break;
-	case 0x93021000:
-		soc_info.name = "RTL9302B";
-		break;
-	case 0x93021800:
-		soc_info.name = "RTL9302C";
-		break;
-	case 0x93022000:
-		soc_info.name = "RTL9302D";
-		break;
-	case 0x93023001:
-		soc_info.name = "RTL9302F";
-		break;
-	default:
-		soc_info.name = "RTL9302";
-	}
-}
-
-void __init prom_init(void)
-{
-	uint32_t model;
-
-	/* uart0 */
-	setup_8250_early_printk_port(0xb8002000, 2, 0);
-
-	model = sw_r32(RTL838X_MODEL_NAME_INFO);
-	pr_info("RTL838X model is %x\n", model);
-	model = model >> 16 & 0xFFFF;
-
-	if ((model != 0x8328) && (model != 0x8330) && (model != 0x8332)
-	    && (model != 0x8380) && (model != 0x8382)) {
-		model = sw_r32(RTL839X_MODEL_NAME_INFO);
-		pr_info("RTL839X model is %x\n", model);
-		model = model >> 16 & 0xFFFF;
-	}
-
-	if ((model & 0x8390) != 0x8380 && (model & 0x8390) != 0x8390) {
-		model = sw_r32(RTL93XX_MODEL_NAME_INFO);
-		pr_info("RTL93XX model is %x\n", model);
-		model = model >> 16 & 0xFFFF;
-	}
-
-	soc_info.id = model;
-
-	switch (model) {
-	case 0x8328:
-		soc_info.name = "RTL8328";
-		soc_info.family = RTL8328_FAMILY_ID;
-		break;
-	case 0x8332:
-		soc_info.name = "RTL8332";
-		soc_info.family = RTL8380_FAMILY_ID;
-		break;
-	case 0x8380:
-		soc_info.name = "RTL8380";
-		soc_info.family = RTL8380_FAMILY_ID;
-		break;
-	case 0x8382:
-		soc_info.name = "RTL8382";
-		soc_info.family = RTL8380_FAMILY_ID;
-		break;
-	case 0x8390:
-		soc_info.name = "RTL8390";
-		soc_info.family = RTL8390_FAMILY_ID;
-		break;
-	case 0x8391:
-		soc_info.name = "RTL8391";
-		soc_info.family = RTL8390_FAMILY_ID;
-		break;
-	case 0x8392:
-		soc_info.name = "RTL8392";
-		soc_info.family = RTL8390_FAMILY_ID;
-		break;
-	case 0x8393:
-		soc_info.name = "RTL8393";
-		soc_info.family = RTL8390_FAMILY_ID;
-		break;
-	case 0x9301:
-		soc_info.name = "RTL9301";
-		soc_info.family = RTL9300_FAMILY_ID;
-		break;
-	case 0x9302:
-		identify_rtl9302();
-		soc_info.family = RTL9300_FAMILY_ID;
-		break;
-	case 0x9313:
-		soc_info.name = "RTL9313";
-		soc_info.family = RTL9310_FAMILY_ID;
-		break;
-	default:
-		soc_info.name = "DEFAULT";
-		soc_info.family = 0;
-	}
-
-	pr_info("SoC Type: %s\n", get_system_type());
-
-	prom_init_cmdline();
-}
diff --git a/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c b/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c
deleted file mode 100644
index eed24ef50f59..000000000000
--- a/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Setup for the Realtek RTL838X SoC:
- *	Memory, Timer and Serial
- *
- * Copyright (C) 2020 B. Koblitz
- * based on the original BSP by
- * Copyright (C) 2006-2012 Tony Wu (tonywu at realtek.com)
- *
- */
-
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/delay.h>
-#include <linux/of_fdt.h>
-#include <linux/irqchip.h>
-
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/prom.h>
-#include <asm/smp-ops.h>
-
-#include "asm/mach-rtl838x/mach-rtl83xx.h"
-
-extern struct rtl83xx_soc_info soc_info;
-
-void __init plat_mem_setup(void)
-{
-	void *dtb;
-
-	set_io_port_base(KSEG1);
-
-	if (fw_passed_dtb) /* UHI interface */
-		dtb = (void *)fw_passed_dtb;
-	else if (__dtb_start != __dtb_end)
-		dtb = (void *)__dtb_start;
-	else
-		panic("no dtb found");
-
-	/*
-	 * Load the devicetree. This causes the chosen node to be
-	 * parsed resulting in our memory appearing
-	 */
-	__dt_setup_arch(dtb);
-}
-
-void __init plat_time_init(void)
-{
-	struct device_node *np;
-	u32 freq = 500000000;
-
-	of_clk_init(NULL);
-	timer_probe();
-
-	np = of_find_node_by_name(NULL, "cpus");
-	if (!np) {
-		pr_err("Missing 'cpus' DT node, using default frequency.");
-	} else {
-		if (of_property_read_u32(np, "frequency", &freq) < 0)
-			pr_err("No 'frequency' property in DT, using default.");
-		else
-			pr_info("CPU frequency from device tree: %dMHz", freq / 1000000);
-		of_node_put(np);
-	}
-
-	mips_hpt_frequency = freq / 2;
-}
-
-void __init arch_init_irq(void)
-{
-	irqchip_init();
-}
diff --git a/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch b/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch
deleted file mode 100644
index 291636ce7bad..000000000000
--- a/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -23,6 +23,7 @@ platform-$(CONFIG_PIC32MZDA)		+= pic32/
- platform-$(CONFIG_MACH_PISTACHIO)	+= pistachio/
- platform-$(CONFIG_RALINK)		+= ralink/
- platform-$(CONFIG_MIKROTIK_RB532)	+= rb532/
-+platform-$(CONFIG_RTL838X)		+= rtl838x/
- platform-$(CONFIG_SGI_IP22)		+= sgi-ip22/
- platform-$(CONFIG_SGI_IP27)		+= sgi-ip27/
- platform-$(CONFIG_SGI_IP28)		+= sgi-ip22/
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -632,6 +632,26 @@ config RALINK
- 	select ARCH_HAS_RESET_CONTROLLER
- 	select RESET_CONTROLLER
- 
-+config RTL838X
-+	bool "Realtek based platforms"
-+	select DMA_NONCOHERENT
-+	select IRQ_MIPS_CPU
-+	select CSRC_R4K
-+	select CEVT_R4K
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_HAS_CPU_MIPS32_R2
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select SYS_SUPPORTS_MIPS16
-+	select SYS_HAS_EARLY_PRINTK
-+	select SYS_HAS_EARLY_PRINTK_8250
-+	select USE_GENERIC_EARLY_PRINTK_8250
-+	select BOOT_RAW
-+	select PINCTRL
-+	select ARCH_HAS_RESET_CONTROLLER
-+	select RESET_CONTROLLER
-+	select USE_OF
-+
- config SGI_IP22
- 	bool "SGI IP22 (Indy/Indigo2)"
- 	select ARC_MEMORY
-- 
2.33.1




More information about the openwrt-devel mailing list