[PATCH v3 1/8] scripts: mkits.sh make it possible to specify fdt@#

[Christian Lamparter]

Some bootloaders are really keen on just one special
fdt in a multi-image fit image. This is a problem, because
currently this is fixed to "fdt at 1".

This patch introduces a new device variable:
DEVICE_FDT_NUM that allows to specify the right
fdt number.

If the value is absent "1" will be chosen.

Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
---
 include/image-commands.mk |  1 +
 include/image.mk          |  6 ++++--
 scripts/mkits.sh          | 12 ++++++++----
 3 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/include/image-commands.mk b/include/image-commands.mk
index 9516801c8d..740d627fc7 100644
--- a/include/image-commands.mk
+++ b/include/image-commands.mk
@@ -158,6 +158,7 @@ define Build/fit
 		-D $(DEVICE_NAME) -o $@.its -k $@ \
 		$(if $(word 2,$(1)),-d $(word 2,$(1))) -C $(word 1,$(1)) \
 		-a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
+		$(if $(DEVICE_FDT_NUM),-n $(DEVICE_FDT_NUM)) \
 		-c $(if $(DEVICE_DTS_CONFIG),$(DEVICE_DTS_CONFIG),"config at 1") \
 		-A $(LINUX_KARCH) -v $(LINUX_VERSION)
 	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
diff --git a/include/image.mk b/include/image.mk
index 703aeb6816..a1308f47ad 100644
--- a/include/image.mk
+++ b/include/image.mk
@@ -432,6 +432,7 @@ define Device/Init
   DEVICE_DTS :=
   DEVICE_DTS_CONFIG :=
   DEVICE_DTS_DIR :=
+  DEVICE_FDT_NUM :=
   SOC :=
 
   BOARD_NAME :=
@@ -453,8 +454,9 @@ DEFAULT_DEVICE_VARS := \
   DEVICE_NAME KERNEL KERNEL_INITRAMFS KERNEL_INITRAMFS_IMAGE KERNEL_SIZE \
   CMDLINE UBOOTENV_IN_UBI KERNEL_IN_UBI BLOCKSIZE PAGESIZE SUBPAGESIZE \
   VID_HDR_OFFSET UBINIZE_OPTS UBINIZE_PARTS MKUBIFS_OPTS DEVICE_DTS \
-  DEVICE_DTS_CONFIG DEVICE_DTS_DIR SOC BOARD_NAME UIMAGE_NAME SUPPORTED_DEVICES \
-  IMAGE_METADATA KERNEL_ENTRY KERNEL_LOADADDR UBOOT_PATH IMAGE_SIZE \
+  DEVICE_DTS_CONFIG DEVICE_DTS_DIR DEVICE_FDT_NUM SOC BOARD_NAME \
+  UIMAGE_NAME SUPPORTED_DEVICES IMAGE_METADATA KERNEL_ENTRY KERNEL_LOADADDR \
+  UBOOT_PATH IMAGE_SIZE \
   DEVICE_COMPAT_VERSION DEVICE_COMPAT_MESSAGE \
   DEVICE_VENDOR DEVICE_MODEL DEVICE_VARIANT \
   DEVICE_ALT0_VENDOR DEVICE_ALT0_MODEL DEVICE_ALT0_VARIANT \
diff --git a/scripts/mkits.sh b/scripts/mkits.sh
index 468ef670e6..bb629d6fca 100755
--- a/scripts/mkits.sh
+++ b/scripts/mkits.sh
@@ -16,7 +16,7 @@
 
 usage() {
 	printf "Usage: %s -A arch -C comp -a addr -e entry" "$(basename "$0")"
-	printf " -v version -k kernel [-D name -d dtb] -o its_file"
+	printf " -v version -k kernel [-D name -n address -d dtb] -o its_file"
 
 	printf "\n\t-A ==> set architecture to 'arch'"
 	printf "\n\t-C ==> set compression type 'comp'"
@@ -26,12 +26,15 @@ usage() {
 	printf "\n\t-v ==> set kernel version to 'version'"
 	printf "\n\t-k ==> include kernel image 'kernel'"
 	printf "\n\t-D ==> human friendly Device Tree Blob 'name'"
+	printf "\n\t-n ==> fdt unit-address 'address'"
 	printf "\n\t-d ==> include Device Tree Blob 'dtb'"
 	printf "\n\t-o ==> create output file 'its_file'\n"
 	exit 1
 }
 
-while getopts ":A:a:c:C:D:d:e:k:o:v:" OPTION
+FDTNUM=1
+
+while getopts ":A:a:c:C:D:d:e:k:n:o:v:" OPTION
 do
 	case $OPTION in
 		A ) ARCH=$OPTARG;;
@@ -42,6 +45,7 @@ do
 		d ) DTB=$OPTARG;;
 		e ) ENTRY_ADDR=$OPTARG;;
 		k ) KERNEL=$OPTARG;;
+		n ) FDTNUM=$OPTARG;;
 		o ) OUTPUT=$OPTARG;;
 		v ) VERSION=$OPTARG;;
 		* ) echo "Invalid option passed to '$0' (options:$*)"
@@ -61,7 +65,7 @@ ARCH_UPPER=$(echo "$ARCH" | tr '[:lower:]' '[:upper:]')
 # Conditionally create fdt information
 if [ -n "${DTB}" ]; then
 	FDT_NODE="
-		fdt at 1 {
+		fdt@$FDTNUM {
 			description = \"${ARCH_UPPER} OpenWrt ${DEVICE} device tree blob\";
 			data = /incbin/(\"${DTB}\");
 			type = \"flat_dt\";
@@ -75,7 +79,7 @@ if [ -n "${DTB}" ]; then
 			};
 		};
 "
-	FDT_PROP="fdt = \"fdt at 1\";"
+	FDT_PROP="fdt = \"fdt@$FDTNUM\";"
 fi
 
 # Create a default, fully populated DTS file
-- 
2.28.0