[PATCH] base-files: drop default setup for vconfig

[Adrian Schmutzler]

vconfig has been disabled by default since 2015 [1] and there are
no remaining uses in entire OpenWrt trunk. However, we still set up
a specific name_type for it during boot.

While this setup is properly implemented to be only triggered when
vconfig is present, it still seems anachronistic and unnecessary
to set up a standard for a tool that is not used anymore.

Therefore, this removes the set_name_type initialization and leaves
it for those people actually using the tool to configure it as needed.

[1] 899a23227e55 ("busybox: improve applets & deprecate ifconfig, route")

Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
 package/base-files/Makefile              | 2 +-
 package/base-files/files/etc/init.d/boot | 1 -
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/package/base-files/Makefile b/package/base-files/Makefile
index 2419849a44..73455174db 100644
--- a/package/base-files/Makefile
+++ b/package/base-files/Makefile
@@ -12,7 +12,7 @@ include $(INCLUDE_DIR)/version.mk
 include $(INCLUDE_DIR)/feeds.mk
 
 PKG_NAME:=base-files
-PKG_RELEASE:=228
+PKG_RELEASE:=229
 PKG_FLAGS:=nonshared
 
 PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/
diff --git a/package/base-files/files/etc/init.d/boot b/package/base-files/files/etc/init.d/boot
index 958a67599e..b36323a97e 100755
--- a/package/base-files/files/etc/init.d/boot
+++ b/package/base-files/files/etc/init.d/boot
@@ -20,7 +20,6 @@ uci_apply_defaults() {
 boot() {
 	[ -f /proc/mounts ] || /sbin/mount_root
 	[ -f /proc/jffs2_bbc ] && echo "S" > /proc/jffs2_bbc
-	[ -f /proc/net/vlan/config ] && vconfig set_name_type DEV_PLUS_VID_NO_PAD
 
 	mkdir -p /var/run
 	mkdir -p /var/log
-- 
2.20.1