ipq806x: add support for TP-Link Talon AD7200
Daniel Golle
daniel at makrotopia.org
Sun Oct 11 19:43:41 EDT 2020
On Mon, Oct 12, 2020 at 02:09:32AM +0300, Paul Fertser wrote:
> From: Gary Cooper <gaco at mail2tor.com>
>
> Device hardware: https://deviwiki.com/wiki/TP-LINK_AD7200_(Talon)
>
> The Talon AD7200 is basically an Archer C2600 with larger flash, a third PCIe lane and an 802.11ad radio. It comes in a different housing reminiscent of the Archers C3200 and C5400.
>
>
> Specifications
> --------------
>
> - IPQ8064 dual-core 1400MHz
> - QCA9988 2.4GHz WiFi
> - QCA9888 5GHz WiFi
> - QCA9500 60GHz WiFi
> - 256MiB SPI Flash
That should be 256Mb or 32MiB
(according to the flash partition table in DTS)
> - 512MiB RAM
> - 5 GBit Ports (QCA8337)
>
> Installation
> ------------
>
> Installation is possible from the OEM web interface.
> Sysupgrade is possible.
> TFTP recovery is possible.
> - Image: AD7200_1.0_tp_recovery.bin
>
> Notes
> - This will be the first 802.11ad device supported by mainline.
It'd be great to split this into a generic part adding 802.11ad
features to mac80211.sh and hostapd.sh, and another commit only
adding the device itself.
>
> Signed-off-by: Gary Cooper <gaco at mail2tor.com>
> ---
> package/base-files/files/sbin/wifi | 1 +
> package/firmware/linux-firmware/qca.mk | 8 +
> package/kernel/mac80211/ath.mk | 13 +-
> .../mac80211/files/lib/wifi/mac80211.sh | 6 +
> .../network/services/hostapd/files/hostapd.sh | 8 +
> .../ipq806x/base-files/etc/board.d/01_leds | 9 +
> .../ipq806x/base-files/etc/board.d/02_network | 4 +
> .../etc/hotplug.d/firmware/11-ath10k-caldata | 2 +
> .../base-files/lib/upgrade/platform.sh | 1 +
> .../arch/arm/boot/dts/qcom-ipq8064-ad7200.dts | 440 ++++++++++++++++++
> target/linux/ipq806x/image/Makefile | 15 +
> tools/firmware-utils/src/tplink-safeloader.c | 44 ++
> 12 files changed, 550 insertions(+), 1 deletion(-)
> create mode 100644 target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts
>
> diff --git a/package/base-files/files/sbin/wifi b/package/base-files/files/sbin/wifi
> index a8b4451c60..75759b94f3 100755
> --- a/package/base-files/files/sbin/wifi
> +++ b/package/base-files/files/sbin/wifi
> @@ -79,6 +79,7 @@ wifi_fixup_hwmode() {
> case "$hwmode" in
> 11bg) hwmode=bg;;
> 11a) hwmode=a;;
> + 11ad) hwmode=ad;;
> 11b) hwmode=b;;
> 11g) hwmode=g;;
> 11n*)
> diff --git a/package/firmware/linux-firmware/qca.mk b/package/firmware/linux-firmware/qca.mk
> index 23fcc0905a..71b484d5c7 100644
> --- a/package/firmware/linux-firmware/qca.mk
> +++ b/package/firmware/linux-firmware/qca.mk
> @@ -37,3 +37,11 @@ define Package/carl9170-firmware/install
> $(INSTALL_DATA) $(PKG_BUILD_DIR)/carl9170-1.fw $(1)/lib/firmware
> endef
> $(eval $(call BuildPackage,carl9170-firmware))
> +
> +Package/wil6210-firmware = $(call Package/firmware-default,wil6210 firmware)
> +define Package/wil6210-firmware/install
> + $(INSTALL_DIR) $(1)/lib/firmware
> + $(INSTALL_DATA) $(PKG_BUILD_DIR)/wil6210.fw $(1)/lib/firmware
> + $(INSTALL_DATA) $(PKG_BUILD_DIR)/wil6210.brd $(1)/lib/firmware
> +endef
> +$(eval $(call BuildPackage,wil6210-firmware))
> diff --git a/package/kernel/mac80211/ath.mk b/package/kernel/mac80211/ath.mk
> index 5db4be8daa..e563fb71fc 100644
> --- a/package/kernel/mac80211/ath.mk
> +++ b/package/kernel/mac80211/ath.mk
> @@ -1,6 +1,6 @@
> PKG_DRIVERS += \
> ath ath5k ath6kl ath6kl-sdio ath6kl-usb ath9k ath9k-common ath9k-htc ath10k \
> - carl9170 owl-loader ar5523
> + carl9170 wil6210 owl-loader ar5523
>
> PKG_CONFIG_DEPENDS += \
> CONFIG_PACKAGE_ATH_DEBUG \
> @@ -20,6 +20,7 @@ ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS
> ATH9K_HTC_DEBUGFS \
> ATH10K_DEBUGFS \
> CARL9170_DEBUGFS \
> + WIL6210_DEBUGFS \
> ATH5K_DEBUG \
> ATH6KL_DEBUG
> endif
> @@ -29,6 +30,7 @@ ifdef CONFIG_PACKAGE_MAC80211_TRACING
> ATH10K_TRACING \
> ATH6KL_TRACING \
> ATH_TRACEPOINTS \
> + WIL6210_TRACING
> ATH5K_TRACER
> endif
>
> @@ -66,6 +68,7 @@ config-$(call config_package,ath6kl-sdio) += ATH6KL_SDIO
> config-$(call config_package,ath6kl-usb) += ATH6KL_USB
>
> config-$(call config_package,carl9170) += CARL9170
> +config-$(call config_package,wil6210) += WIL6210
> config-$(call config_package,ar5523) += AR5523
>
> define KernelPackage/ath/config
> @@ -284,6 +287,14 @@ define KernelPackage/carl9170
> AUTOLOAD:=$(call AutoProbe,carl9170)
> endef
>
> +define KernelPackage/wil6210
> + $(call KernelPackage/mac80211/Default)
> + TITLE:=QCA/Wilocity 60g WiFi card wil6210 support
> + DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +wil6210-firmware
> + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/wil6210/wil6210.ko
> + AUTOLOAD:=$(call AutoProbe,wil6210)
> +endef
> +
> define KernelPackage/owl-loader
> $(call KernelPackage/mac80211/Default)
> TITLE:=Owl loader for initializing Atheros PCI(e) Wifi chips
> diff --git a/package/kernel/mac80211/files/lib/wifi/mac80211.sh b/package/kernel/mac80211/files/lib/wifi/mac80211.sh
> index c0fbfbe5a8..3e99f06693 100644
> --- a/package/kernel/mac80211/files/lib/wifi/mac80211.sh
> +++ b/package/kernel/mac80211/files/lib/wifi/mac80211.sh
> @@ -88,6 +88,12 @@ detect_mac80211() {
> iw phy "$dev" info | grep -q 'VHT Capabilities' && htmode="VHT80"
> }
>
> + iw phy "$dev" info | grep -q '\* 5.... MHz \[' && {
> + mode_band="ad"
> + channel=$(iw phy "$dev" info | grep '\* 5.... MHz \[' | grep '(disabled)' -v -m 1 | sed 's/[^[]*\[\|\|\].*//g')
> + iw phy "$dev" info | grep -q 'Capabilities:' && htmode="HT20"
> + }
> +
> [ -n "$htmode" ] && ht_capab="set wireless.radio${devidx}.htmode=$htmode"
>
> path="$(mac80211_phy_to_path "$dev")"
> diff --git a/package/network/services/hostapd/files/hostapd.sh b/package/network/services/hostapd/files/hostapd.sh
> index 3290358ed2..b5563d88a6 100644
> --- a/package/network/services/hostapd/files/hostapd.sh
> +++ b/package/network/services/hostapd/files/hostapd.sh
> @@ -1163,6 +1163,14 @@ wpa_supplicant_add_network() {
> ;;
> esac
>
> + case "$wpa_cipher" in
> + GCMP)
> + append network_data "pairwise=GCMP" "$N$T"
> + append network_data "group=GCMP" "$N$T"
> + ;;
> + *) ;;
> + esac
> +
> [ "$mode" = mesh ] || {
> case "$wpa" in
> 1)
> diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds
> index c23f25540b..7af06fd3ee 100755
> --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
> +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
> @@ -36,6 +36,15 @@ netgear,r7800)
> ucidef_set_led_switch "wan" "WAN" "white:wan" "switch0" "0x20"
> ucidef_set_led_ide "esata" "eSATA" "white:esata"
> ;;
> +tplink,ad7200)
> + ucidef_set_led_usbport "usb1" "USB 1" "blue:usb_1" "usb1-port1" "usb2-port1"
> + ucidef_set_led_usbport "usb2" "USB 2" "blue:usb_3" "usb3-port1" "usb4-port1"
> + ucidef_set_led_switch "wan" "wan" "blue:wan" "switch0" "0x02"
> + ucidef_set_led_switch "lan" "lan" "blue:lan" "switch0" "0x3c"
> + ucidef_set_led_wlan "wlan2g" "wlan2g" "blue:wlan2g" "phy2tpt"
> + ucidef_set_led_wlan "wlan5g" "wlan5g" "blue:wlan5g" "phy1tpt"
> + ucidef_set_led_netdev "wlan60g" "wlan60g" "blue:wlan60g" "phy0tpt"
> + ;;
> tplink,c2600)
> ucidef_set_led_usbport "usb1" "USB 1" "white:usb_2" "usb1-port1" "usb2-port1"
> ucidef_set_led_usbport "usb2" "USB 2" "white:usb_4" "usb3-port1" "usb4-port1"
> diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
> index 3f9d96881d..d013f114b4 100755
> --- a/target/linux/ipq806x/base-files/etc/board.d/02_network
> +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
> @@ -50,6 +50,10 @@ tplink,c2600)
> ucidef_add_switch "switch0" \
> "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6 at eth1" "5:wan" "0 at eth0"
> ;;
> +tplink,ad7200)
> + ucidef_add_switch "switch0" \
> + "2:lan" "3:lan" "4:lan" "5:lan" "6 at eth1" "1:wan" "0 at eth0"
> + ;;
> qcom,ipq8064-ap161)
> ucidef_set_interface_lan "eth1 eth2"
> ucidef_add_switch "switch0" \
> diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> index 74ad00c5ce..5a19d30538 100644
> --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> @@ -31,6 +31,7 @@ case "$FIRMWARE" in
> caldata_extract "art" 0x1000 0x2f20
> ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x6) +1)
> ;;
> + tplink,ad7200 |\
> tplink,c2600)
> caldata_extract "radio" 0x1000 0x2f20
> ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 0x8) -1)
> @@ -66,6 +67,7 @@ case "$FIRMWARE" in
> caldata_extract "art" 0x5000 0x2f20
> ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x6) +2)
> ;;
> + tplink,ad7200 |\
> tplink,c2600)
> caldata_extract "radio" 0x5000 0x2f20
> ath10k_patch_mac $(mtd_get_mac_binary default-mac 0x8)
> diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> index f61e8ee878..a20d1bbd5b 100644
> --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> @@ -39,6 +39,7 @@ platform_do_upgrade() {
> linksys,ea8500)
> platform_do_upgrade_linksys "$1"
> ;;
> + tplink,ad7200 |\
> tplink,c2600)
> PART_NAME="os-image:rootfs"
> MTD_CONFIG_ARGS="-s 0x200000"
> diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts
> new file mode 100644
> index 0000000000..14ed8b49cc
> --- /dev/null
> +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts
> @@ -0,0 +1,440 @@
> +SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +#include "qcom-ipq8064-v2.0.dtsi"
> +
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + model = "TP-Link Talon AD7200";
> + compatible = "tplink,ad7200", "qcom,ipq8064";
> +
> + memory at 0 {
> + reg = <0x42000000 0x1e000000>;
> + device_type = "memory";
> + };
> +
> + aliases {
> + mdio-gpio0 = &mdio0;
> +
> + led-boot = &power;
> + led-failsafe = &power;
> + led-running = &power;
> + led-upgrade = &power;
> + label-mac-device = &gmac2;
> + };
> +
> + keys {
> + compatible = "gpio-keys";
> + pinctrl-0 = <&button_pins>;
> + pinctrl-names = "default";
> +
> + wifi {
> + label = "wifi";
> + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_RFKILL>;
> + };
> +
> + reset {
> + label = "reset";
> + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_RESTART>;
> + };
> +
> + wps {
> + label = "wps";
> + gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_WPS_BUTTON>;
> + };
> +
> + ledgeneral {
> + label = "ledswitch";
> + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_LIGHTS_TOGGLE>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-0 = <&led_pins>;
> + pinctrl-names = "default";
> +
> + lan {
> + label = "blue:lan";
> + gpios = <&qcom_pinmux 2 GPIO_ACTIVE_HIGH>;
> + };
> +
> + usb1 {
> + label = "blue:usb_1";
> + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
> + };
> +
> + usb3 {
> + label = "blue:usb_3";
> + gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
> + };
> +
> + wps {
> + label = "blue:wps";
> + gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
> + };
> +
> + wan_orange {
> + label = "orange:wan";
> + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
> + };
> +
> + wan_blue {
> + label = "blue:wan";
> + gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
> + };
> +
> + power: status {
> + label = "blue:status";
> + gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
> + };
> +
> + wlan2g {
> + label = "blue:wlan2g";
> + gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
> +
> + };
> +
> + wlan5g {
> + label = "blue:wlan5g";
> + gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
> +
> + };
> +
> + wlan60g {
> + label = "blue:wlan60g";
> + gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +};
> +
> +&qcom_pinmux {
> + button_pins: button_pins {
> + mux {
> + pins = "gpio53", "gpio54", "gpio67";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> + };
> +
> + led_pins: led_pins {
> + mux {
> + pins = "gpio2", "gpio8", "gpio15", "gpio16", "gpio17", "gpio26",
> + "gpio33", "gpio55", "gpio56", "gpio66";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> + };
> +
> + spi_pins: spi_pins {
> + mux {
> + pins = "gpio18", "gpio19", "gpio21";
> + function = "gsbi5";
> + bias-pull-down;
> + };
> +
> + data {
> + pins = "gpio18", "gpio19";
> + drive-strength = <10>;
> + };
> +
> + cs {
> + pins = "gpio20";
> + function = "gpio";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> +
> + clk {
> + pins = "gpio21";
> + drive-strength = <12>;
> + };
> + };
> +
> + usb0_pwr_en_pin: usb0_pwr_en_pin {
> + mux {
> + pins = "gpio25";
> + function = "gpio";
> + drive-strength = <10>;
> + bias-pull-up;
> + output-high;
> + };
> + };
> +
> + usb1_pwr_en_pin: usb1_pwr_en_pin {
> + mux {
> + pins = "gpio23";
> + function = "gpio";
> + drive-strength = <10>;
> + bias-pull-up;
> + output-high;
> + };
> + };
> +};
> +
> +&gsbi5 {
> + qcom,mode = <GSBI_PROT_SPI>;
> + status = "okay";
> +
> + spi4: spi at 1a280000 {
> + status = "okay";
> +
> + pinctrl-0 = <&spi_pins>;
> + pinctrl-names = "default";
> +
> + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
> +
> + m25p80 at 0 {
> + compatible = "jedec,spi-nor";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <50000000>;
> + reg = <0>;
> +
> + SBL1 at 0 {
> + label = "SBL1";
> + reg = <0x0 0x20000>;
> + read-only;
> + };
> +
> + MIBIB at 20000 {
> + label = "MIBIB";
> + reg = <0x20000 0x20000>;
> + read-only;
> + };
> +
> + SBL2 at 40000 {
> + label = "SBL2";
> + reg = <0x40000 0x20000>;
> + read-only;
> + };
> +
> + SBL3 at 60000 {
> + label = "SBL3";
> + reg = <0x60000 0x30000>;
> + read-only;
> + };
> +
> + DDRCONFIG at 90000 {
> + label = "DDRCONFIG";
> + reg = <0x90000 0x10000>;
> + read-only;
> + };
> +
> + SSD at a0000 {
> + label = "SSD";
> + reg = <0xa0000 0x10000>;
> + read-only;
> + };
> +
> + TZ at b0000 {
> + label = "TZ";
> + reg = <0xb0000 0x30000>;
> + read-only;
> + };
> +
> + RPM at e0000 {
> + label = "RPM";
> + reg = <0xe0000 0x20000>;
> + read-only;
> + };
> +
> + fs-uboot at 100000 {
> + label = "fs-uboot";
> + reg = <0x100000 0x70000>;
> + read-only;
> + };
> +
> + uboot-env at 170000 {
> + label = "uboot-env";
> + reg = <0x170000 0x40000>;
> + read-only;
> + };
> +
> + radio at 1b0000 {
> + label = "radio";
> + reg = <0x1b0000 0x40000>;
> + read-only;
> + };
> +
> + os-image at 1f0000 {
> + label = "os-image";
> + reg = <0x1f0000 0x400000>;
> + };
> +
> + rootfs at 5f0000 {
> + label = "rootfs";
> + reg = <0x5f0000 0x1900000>;
> + };
> +
> + defaultmac: default-mac at 1ef0000 {
> + label = "default-mac";
> + reg = <0x1ef0000 0x00200>;
> + read-only;
> + };
> +
> + pin at 1ef0200 {
> + label = "pin";
> + reg = <0x1ef0200 0x00200>;
> + read-only;
> + };
> +
> + device-id at 1ef0400 {
> + label = "device-id";
> + reg = <0x1ef0400 0x00200>;
> + read-only;
> + };
> +
> + product-info at 1ef0600 {
> + label = "product-info";
> + reg = <0x1ef0600 0x0fa00>;
> + read-only;
> + };
> +
> + partition-table at 1f00000 {
> + label = "partition-table";
> + reg = <0x1f00000 0x10000>;
> + read-only;
> + };
> +
> + soft-version at 1f10000 {
> + label = "soft-version";
> + reg = <0x1f10000 0x10000>;
> + read-only;
> + };
> +
> + support-list at 1f20000 {
> + label = "support-list";
> + reg = <0x1f20000 0x10000>;
> + read-only;
> + };
> +
> + profile at 1f30000 {
> + label = "profile";
> + reg = <0x1f30000 0x10000>;
> + read-only;
> + };
> +
> + default-config at 1f40000 {
> + label = "default-config";
> + reg = <0x1f40000 0x10000>;
> + read-only;
> + };
> +
> + user-config at 1f50000 {
> + label = "user-config";
> + reg = <0x1f50000 0x40000>;
> + read-only;
> + };
> +
> + qos-db at 1f90000 {
> + label = "qos-db";
> + reg = <0x1f90000 0x40000>;
> + read-only;
> + };
> +
> + usb-config at 1fd0000 {
> + label = "usb-config";
> + reg = <0x1fd0000 0x10000>;
> + read-only;
> + };
> +
> + log at 1fe0000 {
> + label = "log";
> + reg = <0x1fe0000 0x20000>;
> + read-only;
> + };
> + };
> + };
> +};
> +
> +&usb3_0 {
> + status = "okay";
> +
> + pinctrl-0 = <&usb0_pwr_en_pin>;
> + pinctrl-names = "default";
> +};
> +
> +&usb3_1 {
> + status = "okay";
> +
> + pinctrl-0 = <&usb1_pwr_en_pin>;
> + pinctrl-names = "default";
> +};
> +
> +&pcie0 {
> + status = "okay";
> +};
> +
> +&pcie1 {
> + status = "okay";
> + max-link-speed = <1>;
> +};
> +
> +&pcie2 {
> + status = "okay";
> + max-link-speed = <1>;
> +};
> +
> +&mdio0 {
> + status = "okay";
> +
> + pinctrl-0 = <&mdio0_pins>;
> + pinctrl-names = "default";
> +
> + phy0: ethernet-phy at 0 {
> + reg = <0>;
> + qca,ar8327-initvals = <
> + 0x00004 0x7600000 /* PAD0_MODE */
> + 0x00008 0x1000000 /* PAD5_MODE */
> + 0x0000c 0x80 /* PAD6_MODE */
> + 0x000e4 0x6a545 /* MAC_POWER_SEL */
> + 0x000e0 0xc74164de /* SGMII_CTRL */
> + 0x0007c 0x4e /* PORT0_STATUS */
> + 0x00094 0x4e /* PORT6_STATUS */
> + >;
> + };
> +
> + phy4: ethernet-phy at 4 {
> + reg = <4>;
> + };
> +};
> +
> +&gmac1 {
> + status = "okay";
> + phy-mode = "rgmii";
> + qcom,id = <1>;
> +
> + pinctrl-0 = <&rgmii2_pins>;
> + pinctrl-names = "default";
> +
> + mtd-mac-address = <&defaultmac 0x8>;
> + mtd-mac-address-increment = <1>;
> +
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + };
> +};
> +
> +&gmac2 {
> + status = "okay";
> + phy-mode = "sgmii";
> + qcom,id = <2>;
> +
> + mtd-mac-address = <&defaultmac 0x8>;
> +
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + };
> +};
> +
> +&adm_dma {
> + status = "okay";
> +};
> diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
> index ec73630ae5..6e3ef6f526 100644
> --- a/target/linux/ipq806x/image/Makefile
> +++ b/target/linux/ipq806x/image/Makefile
> @@ -295,6 +295,21 @@ define Device/qcom_ipq8064-db149
> endef
> TARGET_DEVICES += qcom_ipq8064-db149
>
> +define Device/tplink_ad7200
> + $(call Device/TpSafeImage)
> + DEVICE_VENDOR := TP-Link
> + DEVICE_MODEL := Talon AD7200
> + DEVICE_VARIANT := v1
> + SOC := qcom-ipq8064
> + BLOCKSIZE := 128k
> + PAGESIZE := 2048
> + BOARD_NAME := ad7200
> + SUPPORTED_DEVICES += ad7200
> + TPLINK_BOARD_ID := AD7200
> + DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-wil6210
> +endef
> +TARGET_DEVICES += tplink_ad7200
> +
> define Device/tplink_c2600
> $(call Device/TpSafeImage)
> DEVICE_VENDOR := TP-Link
> diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
> index 31b9c032d1..08f96a5fa8 100644
> --- a/tools/firmware-utils/src/tplink-safeloader.c
> +++ b/tools/firmware-utils/src/tplink-safeloader.c
> @@ -651,6 +651,50 @@ static struct device_info boards[] = {
> .last_sysupgrade_partition = "support-list",
> },
>
> + /** Firmware layout for the AD7200 */
> + {
> + .id = "AD7200",
> + .vendor = "",
> + .support_list =
> + "SupportList:\r\n"
> + "{product_name:Talon AD7200,product_ver:1.0.0,special_id:00000000}\r\n",
> + .support_trail = '\x00',
> + .soft_ver = NULL,
> +
> + .partitions = {
> + {"SBL1", 0x00000, 0x20000},
> + {"MIBIB", 0x20000, 0x20000},
> + {"SBL2", 0x40000, 0x20000},
> + {"SBL3", 0x60000, 0x30000},
> + {"DDRCONFIG", 0x90000, 0x10000},
> + {"SSD", 0xa0000, 0x10000},
> + {"TZ", 0xb0000, 0x30000},
> + {"RPM", 0xe0000, 0x20000},
> + {"fs-uboot", 0x100000, 0x70000},
> + {"uboot-env", 0x170000, 0x40000},
> + {"radio", 0x1b0000, 0x40000},
> + {"os-image", 0x1f0000, 0x400000},
> + {"file-system", 0x5f0000, 0x1900000},
> + {"default-mac", 0x1ef0000, 0x00200},
> + {"pin", 0x1ef0200, 0x00200},
> + {"device-id", 0x1ef0400, 0x00200},
> + {"product-info", 0x1ef0600, 0x0fa00},
> + {"partition-table", 0x1f00000, 0x10000},
> + {"soft-version", 0x1f10000, 0x10000},
> + {"support-list", 0x1f20000, 0x10000},
> + {"profile", 0x1f30000, 0x10000},
> + {"default-config", 0x1f40000, 0x10000},
> + {"user-config", 0x1f50000, 0x40000},
> + {"qos-db", 0x1f90000, 0x40000},
> + {"usb-config", 0x1fd0000, 0x10000},
> + {"log", 0x1fe0000, 0x20000},
> + {NULL, 0, 0}
> + },
> +
> + .first_sysupgrade_partition = "os-image",
> + .last_sysupgrade_partition = "file-system"
> + },
> +
> /** Firmware layout for the C2600 */
> {
> .id = "C2600",
> --
> 2.17.1
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list