[PATCH 2/2] mvebu: LS421DE: improve the HDD leds

Daniel González Cabanelas dgcbueu at gmail.com
Wed Nov 11 18:20:10 EST 2020


Hi Adrian,

El mié., 11 nov. 2020 a las 23:50, Adrian Schmutzler
(<mail at adrianschmutzler.de>) escribió:
>
> Hi,
>
> > -----Original Message-----
> > From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org]
> > On Behalf Of Daniel González Cabanelas
> > Sent: Mittwoch, 11. November 2020 23:25
> > To: openwrt-devel at lists.openwrt.org
> > Subject: [PATCH 2/2] mvebu: LS421DE: improve the HDD leds
> >
> > Improve the HDD LEDs used for disk activity:
> >  - Use the labels of the casing for better identification
> >  - Use the trigger activity per ata channel
>
> I'd rather not change the LED label for a weak cosmetic reason like this.
>
Ok, discard the patch.

Regards

> If you insist, please add a migration script in case somebody defined a custom trigger, similar to
> https://github.com/openwrt/openwrt/blob/master/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
>
> Best
>
> Adrian
>
> >
> > Signed-off-by: Daniel González Cabanelas <dgcbueu at gmail.com>
> > ---
> >  .../arch/arm/boot/dts/armada-370-buffalo-ls421de.dts | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-
> > buffalo-ls421de.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-
> > 370-buffalo-ls421de.dts
> > index 7e070f49dc..d05f290b9d 100644
> > --- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-
> > ls421de.dts
> > +++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-
> > ls421de.dts
> > @@ -149,18 +149,18 @@
> >                       gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
> >               };
> >
> > -             hdd1_red {
> > -                     label = "ls421de:red:hdd1";
> > +             disk1_red {
> > +                     label = "ls421de:red:disk1";
> >                       gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
> >                       default-state = "off";
> > -                     linux,default-trigger = "disk-activity";
> > +                     linux,default-trigger = "ata1";
> >               };
> >
> > -             hdd2_red {
> > -                     label = "ls421de:red:hdd2";
> > +             disk2_red {
> > +                     label = "ls421de:red:disk2";
> >                       gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
> >                       default-state = "off";
> > -                     linux,default-trigger = "disk-activity";
> > +                     linux,default-trigger = "ata2";
> >               };
> >       };
> >
> > --
> > 2.29.2
> >
> >
> >
> >
> >
> > _______________________________________________
> > openwrt-devel mailing list
> > openwrt-devel at lists.openwrt.org
> > https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list