[OpenWrt-Devel] [PATCH v6] ath79: add support for COMFAST CF-E130N v2

[mail at adrianschmutzler.de]

Hi,

> Hello. I have just run-tested the patch from your tree on actual hardware - the web GUI works fine, as do both internet and wireless interfaces.
> An investigation into the art partition has shown that there are four sequential MAC addresses stored in memory.
> The first and the third are back-to-back, addresses 0x0000 and 0x0006 respectively.
> The second one is located at 0x1002, and the fourth one is at 0x5006. I have no explanation for why it is like that.
> To answer your question - it's not an exact match, but it's close to that.

That makes perfect sense, as these are the locations of the addresses in the calibration data.

Can you translate that into a list of addresses (you may just report the last one or two bytes ...) related to the locations?

0x0 aa:bb:cc:xx:xx:f1
0x6 aa:bb:cc:xx:xx:f2
etc.

How are these addresses assigned on OEM firmware (lan,wan,2g,5g)?

Best

Adrian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: openpgp-digital-signature.asc
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20200527/8585c38c/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel