[PATCH v4] bcm63xx: R5010UNv2: fix flash partitions for 16MB flash

[Daniel González Cabanelas]

The router Nucom R5010UN v2 has the partitions defined for a 8MB flash,
but the flash chip is 16MB size. We are wasting half of the flash.

Fix it and use generic names for partitions.

Fixes: 474cde61234c ("brcm63xx: probe SPI flash through DT")

Signed-off-by: Daniel González Cabanelas <dgcbueu at gmail.com>
---
Changes in v4: 
  - Patch refreshed
  - Now using generic node names for the partitions
Changes in v3: 
  - added missing SOB
Changes in v2: 
 - the mail client truncated the patch header, fixed

 target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts b/target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts
index 639cef3a7e..365a4552f2 100644
--- a/target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts
+++ b/target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts
@@ -94,20 +94,20 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			cfe at 0 {
+			partition at 0 {
 				reg = <0x000000 0x010000>;
 				label = "cfe";
 				read-only;
 			};
 
-			linux at 10000 {
-				reg = <0x010000 0x7e0000>;
+			partition at 10000 {
+				reg = <0x010000 0xfe0000>;
 				label = "linux";
 				compatible = "brcm,bcm963xx-imagetag";
 			};
 
-			nvram at 7f0000 {
-				reg = <0x7f0000 0x010000>;
+			partition at ff0000 {
+				reg = <0xff0000 0x010000>;
 				label = "nvram";
 			};
 		};
-- 
2.27.0





_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
http://lists.infradead.org/mailman/listinfo/openwrt-devel