[OpenWrt-Devel] Netgear R6260 EEPROM location

[Adrian Schmutzler]

Hi,

> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org] On
> Behalf Of David Bauer
> Sent: Dienstag, 28. Januar 2020 21:05
> To: drvlabo at gmail.com; achterin at googlemail.com; openwrt-devel <openwrt-
> devel at lists.openwrt.org>
> Subject: [OpenWrt-Devel] Netgear R6260 EEPROM location
> 
> Hi,
> 
> while testing my shiny  new NETGEAR R6260 with OpenWrt, i was experiencing
> very bad
> reception as well as throughput. Upon closer inspection, it turns out that the
> EEPROM
> is read from an incorrect offset. The Offset positions here are:
> 
>  - 0x28000 for 5GHz
>  - 0x20000 for 2.4GHz

Have you checked partitioning? This might just be a wrong position for the
factory partition as well.

Best

Adrian

> 
> Can someone confirm these offsets on their boards? Maybe this is wrong not
> only on
> the R6260, but also on the R6350 and R6850.
> 
> Best wishes
> David
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel