[OpenWrt-Devel] [PATCH v2 2/3] kernel: rtl8367b: add configuration for extended interface 2

[Chuanhong Guo]

Hi!

On Tue, Aug 27, 2019 at 5:50 PM Serge Vailugin <vasilugin at yandex.ru> wrote:
>
> Both rtl8367b and rtl8367s have two extended interface
> rtl8367rb: 5 port + 2*RGMII/MII
> rtl8367s:  5 port + SGMII/HSGMI + RGMII/MII
> (?)rtl8367sb:  5 port + 2*RGMII/MII
> These interfaces correspond to EXT1 and EXT2 (ports 6 and 7 respectivly).
> Current driver don't support EXT2 configuration but notexisting EXT0
> (port 5).
> This patch allow to configure EXT2 in dts-file:
>
>         rtl8367rb {
>                 compatible = "realtek,rtl8367b";
>                 cpu_port = <7>;
>                 realtek,extif2 = <1 0 1 1 1 1 1 1 2>; /* configuration for EXT2 */
>                 mii-bus = <&mdio0>;
>                 phy_id = <29>;
>         };
>
> This patch is independent of the rtl8366_smi patch (set switch phy address)
> and may be helpful for device with rtl8367rb connected through EXT2.
>
> Signed-off-by: Serge Vasilugin <vasilugin at yandex.ru>

This patch seems to be broken in patchwork:
https://patchwork.ozlabs.org/patch/1153690/
Would you mind to create patches using git format-patch and resend
them with git send-email?

Regards,
Chuanhong Guo

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel