[OpenWrt-Devel] [PATCH 3/3] ath79: add support for ZyXEL NBG6716

Adrian Schmutzler mail at adrianschmutzler.de
Tue Oct 22 14:01:49 EDT 2019


Hi,

> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org] On Behalf Of André Valentin
> Sent: Dienstag, 22. Oktober 2019 11:52
> To: openwrt-devel at lists.openwrt.org
> Cc: avalentin at marcant.net
> Subject: [OpenWrt-Devel] [PATCH 3/3] ath79: add support for ZyXEL NBG6716
> 
> Attention: Kernel partition size has been enlarged to 4MB.
> To switch, you must update to latest ar71xx-nand snapshort and flash the
> sysupgrade-4M-Kernel.bin:
> 
> zcat openwrt-ath79-nand-zyxel_nbg6716-squashfs-sysupgrade-4M-Kernel.bin | mtd -r -e ubi write - firmware; reboot -f
> You will end up with a fresh config if you do not inject config into the image.
> 
> Access the real u-boot shell:
> ZyXEL uses a proprietary loader/shell on top of u-boot: "ZyXEL zloader v2.02"
> When the device is starting up, the user can enter the the loader shell
> by simply pressing a key within the 3 seconds once the following string
> appears on the serial console:
> 
> |   Hit any key to stop autoboot:  3
> 
> The user is then dropped to a locked shell.
> 
> |NBG6716> HELP
> |ATEN    x[,y]     set BootExtension Debug Flag (y=password)
> |ATSE    x         show the seed of password generator
> |ATSH              dump manufacturer related data in ROM
> |ATRT    [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations)
> |ATGO              boot up whole system
> |ATUR    x         upgrade RAS image (filename)
> |NBG6716>
> 
> In order to escape/unlock a password challenge has to be passed.
> Note: the value is dynamic! you have to calculate your own!
> 
> First use ATSE $MODELNAME (MODELNAME is the hostname in u-boot env)
> to get the challange value/seed.
> 
> |NBG6716> ATSE NBG6716
> |012345678901
> 
> This seed/value can be converted to the password with the help of this
> bash script (Thanks to http://www.adslayuda.com/Zyxel650-9.html authors):
> 
> - tool.sh -
> ror32() {
>   echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) ))
> }
> v="0x$1"
> a="0x${v:2:6}"
> b=$(( $a + 0x10F0A563))
> c=$(( 0x${v:12:14} & 7 ))
> p=$(( $(ror32 $b $c) ^ $a ))
> printf "ATEN 1,%X\n" $p
> - end of tool.sh -
> 
> |# bash ./tool.sh 012345678901
> |
> |ATEN 1,879C711
> 
> copy and paste the result into the shell to unlock zloader.
> 
> |NBG6716> ATEN 1,0046B0017430
> 
> If the entered code was correct the shell will change to
> use the ATGU command to enter the real u-boot shell.
> 
> |NBG6716> ATGU
> |NBG6716#
> 
> idsfg
> 
> Signed-off-by: André Valentin <avalentin at marcant.net>
> ---
>  .../ath79/base-files/etc/board.d/02_network   |   8 +
>  .../etc/hotplug.d/firmware/10-ath9k-eeprom    |   4 +
>  .../etc/hotplug.d/firmware/11-ath10k-caldata  |   4 +
>  .../etc/hotplug.d/ieee80211/00-wifi-migration |   3 +-
>  .../ath79/base-files/lib/upgrade/platform.sh  |   3 +
>  target/linux/ath79/dts/qca9557.dtsi           |  18 ++
>  .../linux/ath79/dts/qca9558_zyxel_nbg6716.dts | 296 ++++++++++++++++++
>  target/linux/ath79/image/Makefile             |   1 +
>  target/linux/ath79/image/common-zyxel.mk      |  29 ++
>  target/linux/ath79/image/nand-zyxel.mk        |  21 ++
>  10 files changed, 386 insertions(+), 1 deletion(-)
>  create mode 100644 target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
>  create mode 100644 target/linux/ath79/image/common-zyxel.mk
>  create mode 100644 target/linux/ath79/image/nand-zyxel.mk
> 
> diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
> index fe74bddbf1..42f3462b89 100755
> --- a/target/linux/ath79/base-files/etc/board.d/02_network
> +++ b/target/linux/ath79/base-files/etc/board.d/02_network
> @@ -301,6 +301,10 @@ ath79_setup_interfaces()
>  		ucidef_add_switch "switch0" \
>  			"0 at eth0" "3:lan:1" "4:lan:2"
>  		;;
> +	zyxel,nbg6716)
> +		ucidef_add_switch "switch0" \
> +			"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6 at eth1"
> +		;;
>  	*)
>  		ucidef_set_interfaces_lan_wan "eth0" "eth1"
>  		;;
> @@ -435,6 +439,10 @@ ath79_setup_macs()
>  	wd,mynet-wifi-rangeextender)
>  		lan_mac=$(nvram get et0macaddr)
>  		;;
> +	zyxel,nbg6716)
> +		lan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
> +		wan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
> +		;;
>  	esac
> 
>  	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
> diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-
> files/etc/hotplug.d/firmware/10-ath9k-eeprom
> index 3240026aec..cfffe5702a 100644
> --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
> +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
> @@ -46,6 +46,10 @@ case "$FIRMWARE" in
>  		caldata_extract "radiocfg" 0x1000 0x440
>  		ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
>  		;;
> +	zyxel,nbg6716)
> +		caldata_extract "art" 0x1000 0x440
> +		ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 0x2

You need to remove the "0x2".

> +		;;
>  	*)
>  		caldata_die "board $board is not supported yet"
>  		;;
> diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-
> files/etc/hotplug.d/firmware/11-ath10k-caldata
> index 8ab0f6f6ad..cc0cd2b7c0 100644
> --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> @@ -112,6 +112,10 @@ case "$FIRMWARE" in
>  	ubnt,unifiac-pro)
>  		caldata_extract "EEPROM" 0x5000 0x844
>  		;;
> +	zyxel,nbg6716)
> +		caldata_extract "art" 0x5000 0x844
> +		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
> +		;;
>  	esac
>  	;;
>  "ath10k/pre-cal-pci-0000:00:00.0.bin")
> diff --git a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/00-wifi-migration b/target/linux/ath79/base-
> files/etc/hotplug.d/ieee80211/00-wifi-migration
> index 37a1346fe7..b0a5d79f9d 100644
> --- a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/00-wifi-migration
> +++ b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/00-wifi-migration
> @@ -15,7 +15,8 @@ migrate_wifi_path() {
> 
>  			case "$board" in
>  				tplink,archer-c7-v1|\
> -				tplink,archer-c7-v2)
> +				tplink,archer-c7-v2|\
> +				zyxel,nbg6716)
>  					path="pci0000:00/0000:00:00.0"
>  					WIFI_PATH_CHANGED=1
>  				;;
> diff --git a/target/linux/ath79/base-files/lib/upgrade/platform.sh b/target/linux/ath79/base-files/lib/upgrade/platform.sh
> index f4fca06384..46bd6ab9ef 100644
> --- a/target/linux/ath79/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ath79/base-files/lib/upgrade/platform.sh
> @@ -51,6 +51,9 @@ platform_do_upgrade() {
>  	ubnt,routerstation-pro)
>  		redboot_fis_do_upgrade "$1" kernel
>  		;;
> +	zyxel,nbg6716)
> +		nand_do_upgrade "$1"
> +		;;
>  	*)
>  		default_do_upgrade "$1"
>  		;;
> diff --git a/target/linux/ath79/dts/qca9557.dtsi b/target/linux/ath79/dts/qca9557.dtsi
> index b29dfc72b2..61e1d5f6a4 100644
> --- a/target/linux/ath79/dts/qca9557.dtsi
> +++ b/target/linux/ath79/dts/qca9557.dtsi
> @@ -178,6 +178,24 @@
>  			};
>  		};
> 
> +		nand: nand at 1b800200 {
> +			compatible = "qca,ar934x-nand";
> +			reg = <0x1b800200 0xb8>;
> +
> +			interrupts = <21>;
> +			interrupt-parent = <&miscintc>;
> +
> +			resets = <&rst 14>;
> +			reset-names = "nand";
> +
> +			nand-ecc-mode = "hw";
> +
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
>  		gmac: gmac at 18070000 {
>  			compatible = "qca,qca9550-gmac";
>  			reg = <0x18070000 0x58>;
> diff --git a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
> new file mode 100644
> index 0000000000..e0065cc012
> --- /dev/null
> +++ b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
> @@ -0,0 +1,296 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +#include "qca9557.dtsi"
> +
> +/ {
> +	compatible = "zyxel,nbg6716", "qca,qca9558";
> +	model = "ZyXEL NBG6716";
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200n8";
> +	};
> +
> +	aliases {
> +		led-boot = &power;
> +		led-failsafe = &power;
> +		led-running = &power;
> +		led-upgrade = &power;
> +		label-mac-device = &eth0;

This won't work after you have removed the mtd-mac-address entries from DTS.
You will need to use label_mac in 02_network.

Despite, I'm still waiting for your explanation on the MAC address assignment.

> +	};

Empty line missing.

> +	leds {
> +		compatible = "gpio-leds";
> +
> +		power: power {
> +			label = "nbg6716:white:power";
> +			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		wan {
> +			label = "nbg6716:white:internet";
> +			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
> +		};
> +		usb1 {
> +			label = "nbg6716:white:usb1";
> +			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "usbport";
> +			trigger-sources = <&hub_port0>;
> +		};
> +		usb2 {
> +			label = "nbg6716:white:usb2";
> +			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "usbport";
> +			trigger-sources = <&hub_port1>;
> +		};
> +		wifi2 {
> +			label = "nbg6716:white:wifi2";
> +			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "phy1tpt";
> +		};
> +		wifi5 {
> +			label = "nbg6716:white:wifi5";
> +			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "phy0tpt";
> +		};
> +		wps {
> +			label = "nbg6716:white:wps";
> +			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
> +		};

All nodes should be separated by one empty line, but without an empty line at the beginning and the end inside the parent node.

> +	};
> +
> +	keys {
> +		compatible = "gpio-keys";
> +
> +		reset {
> +			label = "reset";
> +			linux,code = <KEY_RESTART>;
> +			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <60>;
> +		};
> +
> +	        wifi_button {
> +                        label = "WiFi button";
> +			linux,code = <KEY_RFKILL>;
> +			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <60>;
> +		};
> +
> +	        usb1 {
> +                        label = "USB1 eject button";
> +			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <60>;
> +		};
> +
> +	        usb2 {
> +                        label = "USB2 eject button";
> +			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <60>;
> +		};

Here, the indent is wrong.

> +
> +		wps {
> +			label = "WPS button";
> +			linux,code = <KEY_WPS_BUTTON>;
> +			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <60>;
> +		};
> +	};
> +	gpio-export {
> +		compatible = "gpio-export";
> +		#size-cells = <0>;
> +
> +		gpio_usb_power {
> +			gpio-export,name = "nbg6716:power:usb";
> +			gpio-export,output = <1>;
> +			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
> +		};
> +	};

gpio-export is deprecated. Have a look at gpio-hog (should be easy to grep inside the ath79 target).

> +};
> +
> +&uart {
> +	status = "okay";
> +};
> +
> +&spi {
> +	status = "okay";
> +	num-cs = <1>;
> +
> +	flash at 0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0>;
> +		spi-max-frequency = <25000000>;
> +
> +		partitions {
> +			compatible = "fixed-partitions";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			uboot: partition at 0 {
> +				label = "u-boot";
> +				reg = <0x000000 0x040000>;
> +				read-only;
> +			};
> +
> +                        uboot_env: partition at 40000 {
> +                                label = "u-boot-env";
> +                                reg = <0x040000 0x010000>;
> +                        };

Indent!

> +
> +			art: partition at 50000 {
> +				label = "art";
> +				reg = <0x050000 0x010000>;
> +				read-only;
> +			};
> +
> +			partition at 60000 {
> +				label = "nbu";
> +				reg = <0x060000 0xFA0000>;

Consider switching to lower case.

> +			};
> +		};
> +	};
> +};
> +
> +&nand {
> +	status = "okay";
> +
> +	partitions {
> +		compatible = "fixed-partitions";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +
> +		partition at 0 {
> +			label = "zyxel_rfsd";
> +			reg = <0x0 0x200000>;
> +		};
> +
> +		partition at 200000 {
> +			label = "romd";
> +			reg = <0x200000 0x200000>;
> +		};
> +
> +		partition at 400000 {
> +			label = "header";
> +			reg = <0x400000 0x100000>;
> +		};
> +
> +		firmware at 500000 {
> +			label = "firmware";
> +			reg = <0x500000 0x7B00000>;

Consider switching to lower case.

> +		};
> +
> +		partition at 500000 {
> +			label = "kernel";
> +			reg = <0x500000 0x400000>;
> +		};
> +
> +		partition at 900000 {
> +			label = "ubi";
> +			reg = <0x900000 0x7700000>;
> +		};
> +	};
> +};
> +
> +&mdio0 {
> +	status = "okay";
> +
> +	phy0: ethernet-phy at 0 {
> +		reg = <17>;
> +		phy-mode = "rgmii-id";
> +	};
> +
> +	switch0 at 1f {
> +		compatible = "qca,ar8327";
> +		reg = <0x1f>;
> +		qca,ar8327-initvals = <
> +			0x04 0x87600000 /* PORT0 PAD MODE CTRL */
> +			0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
> +			0x10 0x81000080 /* POWER_ON_STRIP */
> +			0x50 0xffb7ffb7 /* LED_CTRL0 */
> +			0x54 0xffb7ffb7 /* LED_CTRL1 */
> +			0x58 0xffb7ffb7 /* LED_CTRL2 */
> +			0x5c 0x03ffff00 /* LED_CTRL3 */
> +			0x7c 0x0000007e /* PORT0_STATUS */
> +			0x94 0x0000007e /* PORT6 STATUS */
> +			>;
> +	};
> +};
> +
> +&mdio1 {
> +	status = "okay";
> +
> +	phy1: ethernet-phy at 1 {
> +		reg = <1>;
> +		phy-mode = "sgmii";
> +	};
> +};
> +
> +
> +&eth0 {
> +	status = "okay";
> +
> +	pll-data = <0xa6000000 0x00000101 0x00001616>;
> +	phy-handle = <&phy0>;
> +	fixed-link {
> +		speed = <1000>;
> +		full-duplex;
> +	};
> +};
> +
> +&eth1 {
> +	status = "okay";
> +
> +	pll-data = <0x03000101 0x00000101 0x00001616>;
> +	phy-handle = <&phy1>;
> +	fixed-link {
> +		speed = <1000>;
> +		full-duplex;
> +	};
> +};
> +
> +&gpio {
> +	status = "okay";
> +};
> +
> +&wmac {
> +	status = "okay";
> +};
> +
> +&pcie1 {
> +        status = "okay";
> +
> +	wifi at 0,0 {
> +		compatible = "qcom,ath10k";
> +		reg = <0 0 0 0 0>;
> +		qcom,ath10k-calibration-variant = "ZyXEL-NBG6716";
> +	};
> +};
> +
> +&usb_phy0 {
> +        status = "okay";
> +};
> +
> +&usb_phy1 {
> +        status = "okay";
> +};
> +
> +&usb0 {
> +        status = "okay";
> +
> +	hub_port0: port at 1 {
> +		reg = <1>;
> +		#trigger-source-cells = <0>;
> +	};
> +
> +};
> +
> +&usb1 {
> +        status = "okay";
> +
> +	hub_port1: port at 1 {
> +		reg = <1>;
> +		#trigger-source-cells = <0>;
> +	};
> +};
> +

Remove empty line at the end.

> diff --git a/target/linux/ath79/image/Makefile b/target/linux/ath79/image/Makefile
> index 24768ef5e0..074d7ead02 100644
> --- a/target/linux/ath79/image/Makefile
> +++ b/target/linux/ath79/image/Makefile
> @@ -77,6 +77,7 @@ include ./generic-ubnt.mk
>  endif
>  ifeq ($(SUBTARGET),nand)
>  include ./nand.mk
> +include ./nand-zyxel.mk

At the moment, we have _one_ device inside nand.mk (and still only four after jeffsf's changes).

I strongly suggest to just put the contents of both common-zyxel.mk and nand-zyxel.mk into nand.mk, and not have one file per definition.

Best

Adrian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: openpgp-digital-signature.asc
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20191022/8caebec3/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list