[OpenWrt-Devel] [PATCH v2] ipq40xx: add label MAC address for Netgear EX6100v2/EX6150v2

Adrian Schmutzler freifunk at adrianschmutzler.de
Mon Oct 21 07:36:28 EDT 2019


This is based on the EX6150v2, which should be identical to
the EX6100v2:

The device bears two MAC addresses ("MAC 1" and "MAC 2") that
correspond to phy0 and phy1.

The ethernet MAC address (gmac0) is the same as phy0.
As this one is accessible via local-mac-address in gmac0, the
latter is used for label-mac-device.

(Although this is a one-port, gmac1 also has a local-mac-address
assigned. This has the same vendor part as the other addresses,
but completely different data for the device part.)

Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>

---

v2: Also set for ex6100v2 by using DTSI
---
 .../files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi      | 1 +
 1 file changed, 1 insertion(+)

diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
index edc1af60fe..cc70080c92 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
+++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
@@ -78,6 +78,7 @@
 		led-failsafe = &power_amber;
 		led-running = &power_green;
 		led-upgrade = &power_amber;
+		label-mac-device = &gmac0;
 	};
 
 	keys {
-- 
2.20.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list