[OpenWrt-Devel] [PATCH 1/4] kernel: remove obsolete phylink/SFP patches

Russell King linux at armlinux.org.uk
Mon Nov 25 11:46:38 EST 2019


Remove the old phylink/SFP patches from the OpenWRT build; these will
be updated with a new set in subsequent.

450-reprobe_sfp_phy is also removed for several reasons:
1) it is not in mainline.
2) it breaks copper modules that do not have a PHY.
3) it makes backporting the current patch set harder.

Discussion is ongoing with the patch author for a mainline Linux kernel
patch for this.

Signed-off-by: Russell King <linux at armlinux.org.uk>
---
 ...etdev-sfp_bus-and-use-for-start-stop.patch |  39 ---
 ...5-net-phy-marvell10g-add-SFP-support.patch | 155 ---------
 .../406-sfp-add-sfp-compatible.patch          |  24 --
 ...7-sfp-display-SFP-module-information.patch | 297 ------------------
 .../408-sfp-more-cotsworks-fixes.patch        |  44 ---
 .../patches-4.19/450-reprobe_sfp_phy.patch    |  94 ------
 6 files changed, 653 deletions(-)
 delete mode 100644 target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch
 delete mode 100644 target/linux/mvebu/patches-4.19/405-net-phy-marvell10g-add-SFP-support.patch
 delete mode 100644 target/linux/mvebu/patches-4.19/406-sfp-add-sfp-compatible.patch
 delete mode 100644 target/linux/mvebu/patches-4.19/407-sfp-display-SFP-module-information.patch
 delete mode 100644 target/linux/mvebu/patches-4.19/408-sfp-more-cotsworks-fixes.patch
 delete mode 100644 target/linux/mvebu/patches-4.19/450-reprobe_sfp_phy.patch

diff --git a/target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch b/target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch
deleted file mode 100644
index f2581ca6b733..000000000000
--- a/target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 0068a89747e7c1d9a0bbb7282a34382a4274638a Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel at armlinux.org.uk>
-Date: Fri, 14 Apr 2017 16:41:55 +0100
-Subject: [PATCH] sfp: provide netdev sfp_bus and use for start/stop
-
-Add a netdev sfp_bus pointer for propagating the phylink start/stop
-actions to the SFP cage: the SFP cage may not be directly connected to
-phylink, but may be the other side of a fixed PHY, and SFP needs to
-know when the netdev is brought up or taken down.
-
-Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -949,8 +949,8 @@ void phylink_start(struct phylink *pl)
- 
- 	if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
- 		mod_timer(&pl->link_poll, jiffies + HZ);
--	if (pl->sfp_bus)
--		sfp_upstream_start(pl->sfp_bus);
-+	if (pl->netdev->sfp_bus)
-+		sfp_upstream_start(pl->netdev->sfp_bus);
- 	if (pl->phydev)
- 		phy_start(pl->phydev);
- }
-@@ -971,8 +971,8 @@ void phylink_stop(struct phylink *pl)
- 
- 	if (pl->phydev)
- 		phy_stop(pl->phydev);
--	if (pl->sfp_bus)
--		sfp_upstream_stop(pl->sfp_bus);
-+	if (pl->netdev->sfp_bus)
-+		sfp_upstream_stop(pl->netdev->sfp_bus);
- 	if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
- 		del_timer_sync(&pl->link_poll);
- 
diff --git a/target/linux/mvebu/patches-4.19/405-net-phy-marvell10g-add-SFP-support.patch b/target/linux/mvebu/patches-4.19/405-net-phy-marvell10g-add-SFP-support.patch
deleted file mode 100644
index 9624b6cd8127..000000000000
--- a/target/linux/mvebu/patches-4.19/405-net-phy-marvell10g-add-SFP-support.patch
+++ /dev/null
@@ -1,155 +0,0 @@
-From 5f3ac54810055fec0cc667bb04c16f783830abff Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel at armlinux.org.uk>
-Date: Fri, 14 Apr 2017 14:21:25 +0100
-Subject: [PATCH] net: phy: marvell10g: add SFP+ support
-
-Add support for SFP+ cages to the Marvell 10G PHY driver. This is
-slightly complicated by the way phylib works in that we need to use
-a multi-step process to attach the SFP bus, and we also need to track
-the phylink state machine to know when the module's transmit disable
-signal should change state.
-
-With appropriate DT changes, this allows the SFP+ canges on the
-Macchiatobin platform to be functional.
-
-Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
----
- drivers/net/phy/marvell10g.c | 80 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 80 insertions(+)
-
---- a/drivers/net/phy/marvell10g.c
-+++ b/drivers/net/phy/marvell10g.c
-@@ -25,6 +25,8 @@
- #include <linux/hwmon.h>
- #include <linux/marvell_phy.h>
- #include <linux/phy.h>
-+#include <linux/property.h>
-+#include <linux/sfp.h>
- 
- enum {
- 	MV_PMA_BOOT		= 0xc050,
-@@ -56,6 +58,11 @@ enum {
- };
- 
- struct mv3310_priv {
-+	struct fwnode_handle *sfp_fwnode;
-+	struct sfp_bus *sfp_bus;
-+	enum phy_state state;
-+	bool running;
-+
- 	struct device *hwmon_dev;
- 	char *hwmon_name;
- };
-@@ -219,6 +226,27 @@ static int mv3310_hwmon_probe(struct phy
- }
- #endif
- 
-+static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
-+{
-+	struct phy_device *phydev = upstream;
-+	struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
-+	phy_interface_t iface;
-+
-+	sfp_parse_support(priv->sfp_bus, id, support);
-+	iface = sfp_select_interface(priv->sfp_bus, id, support);
-+
-+	if (iface != PHY_INTERFACE_MODE_10GKR) {
-+		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
-+		return -EINVAL;
-+	}
-+	return 0;
-+}
-+
-+static const struct sfp_upstream_ops mv3310_sfp_ops = {
-+	.module_insert = mv3310_sfp_insert,
-+};
-+
- static int mv3310_probe(struct phy_device *phydev)
- {
- 	struct mv3310_priv *priv;
-@@ -249,9 +277,30 @@ static int mv3310_probe(struct phy_devic
- 	if (ret)
- 		return ret;
- 
-+	if (phydev->mdio.dev.fwnode) {
-+		struct fwnode_reference_args ref;
-+		int ret;
-+
-+		ret = fwnode_property_get_reference_args(phydev->mdio.dev.fwnode,
-+							 "sfp", NULL, 0, 0,
-+							 &ref);
-+		if (ret == 0)
-+			priv->sfp_fwnode = ref.fwnode;
-+	}
-+
- 	return 0;
- }
- 
-+static void mv3310_remove(struct phy_device *phydev)
-+{
-+	struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
-+
-+	if (priv->sfp_bus)
-+		sfp_unregister_upstream(priv->sfp_bus);
-+
-+	fwnode_handle_put(priv->sfp_fwnode);
-+}
-+
- static int mv3310_suspend(struct phy_device *phydev)
- {
- 	return 0;
-@@ -262,8 +311,29 @@ static int mv3310_resume(struct phy_devi
- 	return mv3310_hwmon_config(phydev, true);
- }
- 
-+static void mv3310_link_change_notify(struct phy_device *phydev)
-+{
-+	struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
-+	enum phy_state state = phydev->state;
-+	bool running;
-+
-+	if (priv->sfp_bus && priv->state != state) {
-+		priv->state = state;
-+
-+		running = state >= PHY_UP && state < PHY_HALTED;
-+		if (priv->running != running) {
-+			priv->running = running;
-+			if (running)
-+				sfp_upstream_start(priv->sfp_bus);
-+			else
-+				sfp_upstream_stop(priv->sfp_bus);
-+		}
-+	}
-+}
-+
- static int mv3310_config_init(struct phy_device *phydev)
- {
-+	struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
- 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
- 	u32 mask;
- 	int val;
-@@ -357,6 +427,14 @@ static int mv3310_config_init(struct phy
- 	phydev->supported &= mask;
- 	phydev->advertising &= phydev->supported;
- 
-+	/* Would be nice to do this in the probe function, but unfortunately,
-+	 * phylib doesn't have phydev->attached_dev set there.
-+	 */
-+	if (priv->sfp_fwnode && !priv->sfp_bus)
-+		priv->sfp_bus = sfp_register_upstream(priv->sfp_fwnode,
-+						      phydev->attached_dev,
-+						      phydev, &mv3310_sfp_ops);
-+
- 	return 0;
- }
- 
-@@ -566,6 +644,8 @@ static struct phy_driver mv3310_drivers[
- 		.config_aneg	= mv3310_config_aneg,
- 		.aneg_done	= mv3310_aneg_done,
- 		.read_status	= mv3310_read_status,
-+		.remove		= mv3310_remove,
-+		.link_change_notify = mv3310_link_change_notify,
- 	},
- };
- 
diff --git a/target/linux/mvebu/patches-4.19/406-sfp-add-sfp-compatible.patch b/target/linux/mvebu/patches-4.19/406-sfp-add-sfp-compatible.patch
deleted file mode 100644
index 0c6cb72cb9be..000000000000
--- a/target/linux/mvebu/patches-4.19/406-sfp-add-sfp-compatible.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 7e8bf5227f87601d8d74948bcae8846d2bdd6995 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel at armlinux.org.uk>
-Date: Fri, 14 Apr 2017 20:17:13 +0100
-Subject: [PATCH] sfp: add sfp+ compatible
-
-Add a compatible for SFP+ cages.  SFP+ cages are backwards compatible,
-but the ethernet device behind them may not support the slower speeds
-of SFP modules.
-
-Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -230,6 +230,7 @@ static const struct sff_data sfp_data =
- static const struct of_device_id sfp_of_match[] = {
- 	{ .compatible = "sff,sff", .data = &sff_data, },
- 	{ .compatible = "sff,sfp", .data = &sfp_data, },
-+	{ .compatible = "sff,sfp+", .data = &sfp_data, },
- 	{ },
- };
- MODULE_DEVICE_TABLE(of, sfp_of_match);
diff --git a/target/linux/mvebu/patches-4.19/407-sfp-display-SFP-module-information.patch b/target/linux/mvebu/patches-4.19/407-sfp-display-SFP-module-information.patch
deleted file mode 100644
index 854ac68769f9..000000000000
--- a/target/linux/mvebu/patches-4.19/407-sfp-display-SFP-module-information.patch
+++ /dev/null
@@ -1,297 +0,0 @@
-From 4ce55fb01c473bf1ad2048f8b4db62dca392e6d2 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel at arm.linux.org.uk>
-Date: Sun, 13 Sep 2015 01:06:31 +0100
-Subject: [PATCH] sfp: display SFP module information
-
-Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
----
- drivers/net/phy/sfp.c | 261 +++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 258 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1132,6 +1132,184 @@ static void sfp_hwmon_remove(struct sfp
- }
- #endif
- 
-+static const char *sfp_link_len(char *buf, size_t size, unsigned int length,
-+	unsigned int multiplier)
-+{
-+	if (length == 0)
-+		return "unsupported/unspecified";
-+
-+	if (length == 255) {
-+		*buf++ = '>';
-+		size -= 1;
-+		length -= 1;
-+	}
-+
-+	length *= multiplier;
-+
-+	if (length >= 1000)
-+		snprintf(buf, size, "%u.%0*ukm",
-+			length / 1000,
-+			multiplier > 100 ? 1 :
-+			multiplier > 10 ? 2 : 3,
-+			length % 1000);
-+	else
-+		snprintf(buf, size, "%um", length);
-+
-+	return buf;
-+}
-+
-+struct bitfield {
-+	unsigned int mask;
-+	unsigned int val;
-+	const char *str;
-+};
-+
-+static const struct bitfield sfp_options[] = {
-+	{
-+		.mask = SFP_OPTIONS_HIGH_POWER_LEVEL,
-+		.val = SFP_OPTIONS_HIGH_POWER_LEVEL,
-+		.str = "hpl",
-+	}, {
-+		.mask = SFP_OPTIONS_PAGING_A2,
-+		.val = SFP_OPTIONS_PAGING_A2,
-+		.str = "paginga2",
-+	}, {
-+		.mask = SFP_OPTIONS_RETIMER,
-+		.val = SFP_OPTIONS_RETIMER,
-+		.str = "retimer",
-+	}, {
-+		.mask = SFP_OPTIONS_COOLED_XCVR,
-+		.val = SFP_OPTIONS_COOLED_XCVR,
-+		.str = "cooled",
-+	}, {
-+		.mask = SFP_OPTIONS_POWER_DECL,
-+		.val = SFP_OPTIONS_POWER_DECL,
-+		.str = "powerdecl",
-+	}, {
-+		.mask = SFP_OPTIONS_RX_LINEAR_OUT,
-+		.val = SFP_OPTIONS_RX_LINEAR_OUT,
-+		.str = "rxlinear",
-+	}, {
-+		.mask = SFP_OPTIONS_RX_DECISION_THRESH,
-+		.val = SFP_OPTIONS_RX_DECISION_THRESH,
-+		.str = "rxthresh",
-+	}, {
-+		.mask = SFP_OPTIONS_TUNABLE_TX,
-+		.val = SFP_OPTIONS_TUNABLE_TX,
-+		.str = "tunabletx",
-+	}, {
-+		.mask = SFP_OPTIONS_RATE_SELECT,
-+		.val = SFP_OPTIONS_RATE_SELECT,
-+		.str = "ratesel",
-+	}, {
-+		.mask = SFP_OPTIONS_TX_DISABLE,
-+		.val = SFP_OPTIONS_TX_DISABLE,
-+		.str = "txdisable",
-+	}, {
-+		.mask = SFP_OPTIONS_TX_FAULT,
-+		.val = SFP_OPTIONS_TX_FAULT,
-+		.str = "txfault",
-+	}, {
-+		.mask = SFP_OPTIONS_LOS_INVERTED,
-+		.val = SFP_OPTIONS_LOS_INVERTED,
-+		.str = "los-",
-+	}, {
-+		.mask = SFP_OPTIONS_LOS_NORMAL,
-+		.val = SFP_OPTIONS_LOS_NORMAL,
-+		.str = "los+",
-+	}, { }
-+};
-+
-+static const struct bitfield diagmon[] = {
-+	{
-+		.mask = SFP_DIAGMON_DDM,
-+		.val = SFP_DIAGMON_DDM,
-+		.str = "ddm",
-+	}, {
-+		.mask = SFP_DIAGMON_INT_CAL,
-+		.val = SFP_DIAGMON_INT_CAL,
-+		.str = "intcal",
-+	}, {
-+		.mask = SFP_DIAGMON_EXT_CAL,
-+		.val = SFP_DIAGMON_EXT_CAL,
-+		.str = "extcal",
-+	}, {
-+		.mask = SFP_DIAGMON_RXPWR_AVG,
-+		.val = SFP_DIAGMON_RXPWR_AVG,
-+		.str = "rxpwravg",
-+	}, { }
-+};
-+
-+static const char *sfp_bitfield(char *out, size_t outsz, const struct bitfield *bits, unsigned int val)
-+{
-+	char *p = out;
-+	int n;
-+
-+	*p = '\0';
-+	while (bits->mask) {
-+		if ((val & bits->mask) == bits->val) {
-+			n = snprintf(p, outsz, "%s%s",
-+				     out != p ? ", " : "",
-+				     bits->str);
-+			if (n == outsz)
-+				break;
-+			p += n;
-+			outsz -= n;
-+		}
-+		bits++;
-+	}
-+
-+	return out;
-+}
-+
-+static const char *sfp_connector(unsigned int connector)
-+{
-+	switch (connector) {
-+	case SFP_CONNECTOR_UNSPEC:
-+		return "unknown/unspecified";
-+	case SFP_CONNECTOR_SC:
-+		return "SC";
-+	case SFP_CONNECTOR_FIBERJACK:
-+		return "Fiberjack";
-+	case SFP_CONNECTOR_LC:
-+		return "LC";
-+	case SFP_CONNECTOR_MT_RJ:
-+		return "MT-RJ";
-+	case SFP_CONNECTOR_MU:
-+		return "MU";
-+	case SFP_CONNECTOR_SG:
-+		return "SG";
-+	case SFP_CONNECTOR_OPTICAL_PIGTAIL:
-+		return "Optical pigtail";
-+	case SFP_CONNECTOR_HSSDC_II:
-+		return "HSSDC II";
-+	case SFP_CONNECTOR_COPPER_PIGTAIL:
-+		return "Copper pigtail";
-+	default:
-+		return "unknown";
-+	}
-+}
-+
-+static const char *sfp_encoding(unsigned int encoding)
-+{
-+	switch (encoding) {
-+	case SFP_ENCODING_UNSPEC:
-+		return "unspecified";
-+	case SFP_ENCODING_8472_64B66B:
-+		return "64b66b";
-+	case SFP_ENCODING_8B10B:
-+		return "8b10b";
-+	case SFP_ENCODING_4B5B:
-+		return "4b5b";
-+	case SFP_ENCODING_NRZ:
-+		return "NRZ";
-+	case SFP_ENCODING_8472_MANCHESTER:
-+		return "MANCHESTER";
-+	default:
-+		return "unknown";
-+	}
-+}
-+
- /* Helpers */
- static void sfp_module_tx_disable(struct sfp *sfp)
- {
-@@ -1376,6 +1554,8 @@ static int sfp_sm_mod_probe(struct sfp *
- {
- 	/* SFP module inserted - read I2C data */
- 	struct sfp_eeprom_id id;
-+	char date[9];
-+	char options[80];
- 	bool cotsworks;
- 	u8 check;
- 	int ret;
-@@ -1432,12 +1612,87 @@ static int sfp_sm_mod_probe(struct sfp *
- 
- 	sfp->id = id;
- 
--	dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %.*s\n",
-+	date[0] = sfp->id.ext.datecode[4];
-+	date[1] = sfp->id.ext.datecode[5];
-+	date[2] = '-';
-+	date[3] = sfp->id.ext.datecode[2];
-+	date[4] = sfp->id.ext.datecode[3];
-+	date[5] = '-';
-+	date[6] = sfp->id.ext.datecode[0];
-+	date[7] = sfp->id.ext.datecode[1];
-+	date[8] = '\0';
-+
-+	dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %s\n",
- 		 (int)sizeof(id.base.vendor_name), id.base.vendor_name,
- 		 (int)sizeof(id.base.vendor_pn), id.base.vendor_pn,
- 		 (int)sizeof(id.base.vendor_rev), id.base.vendor_rev,
--		 (int)sizeof(id.ext.vendor_sn), id.ext.vendor_sn,
--		 (int)sizeof(id.ext.datecode), id.ext.datecode);
-+		 (int)sizeof(id.ext.vendor_sn), id.ext.vendor_sn, date);
-+	dev_info(sfp->dev, "  %s connector, encoding %s, nominal bitrate %u.%uGbps +%u%% -%u%%\n",
-+		 sfp_connector(sfp->id.base.connector),
-+		 sfp_encoding(sfp->id.base.encoding),
-+		 sfp->id.base.br_nominal / 10,
-+		 sfp->id.base.br_nominal % 10,
-+		 sfp->id.ext.br_max, sfp->id.ext.br_min);
-+	dev_info(sfp->dev, "  1000BaseSX%c 1000BaseLX%c 1000BaseCX%c 1000BaseT%c 100BaseLX%c 100BaseFX%c BaseBX10%c BasePX%c\n",
-+		 sfp->id.base.e1000_base_sx ? '+' : '-',
-+		 sfp->id.base.e1000_base_lx ? '+' : '-',
-+		 sfp->id.base.e1000_base_cx ? '+' : '-',
-+		 sfp->id.base.e1000_base_t ? '+' : '-',
-+		 sfp->id.base.e100_base_lx ? '+' : '-',
-+		 sfp->id.base.e100_base_fx ? '+' : '-',
-+		 sfp->id.base.e_base_bx10 ? '+' : '-',
-+		 sfp->id.base.e_base_px ? '+' : '-');
-+	dev_info(sfp->dev, "  10GBaseSR%c 10GBaseLR%c 10GBaseLRM%c 10GBaseER%c\n",
-+		 sfp->id.base.e10g_base_sr ? '+' : '-',
-+		 sfp->id.base.e10g_base_lr ? '+' : '-',
-+		 sfp->id.base.e10g_base_lrm ? '+' : '-',
-+		 sfp->id.base.e10g_base_er ? '+' : '-');
-+
-+	if (!sfp->id.base.sfp_ct_passive && !sfp->id.base.sfp_ct_active &&
-+	    !sfp->id.base.e1000_base_t) {
-+		char len_9um[16], len_om[16];
-+
-+		dev_info(sfp->dev, "  Wavelength %unm, fiber lengths:\n",
-+			 be16_to_cpup(&sfp->id.base.optical_wavelength));
-+
-+		if (sfp->id.base.link_len[0] == 255)
-+			strcpy(len_9um, ">254km");
-+		else if (sfp->id.base.link_len[1] && sfp->id.base.link_len[1] != 255)
-+			sprintf(len_9um, "%um",
-+				sfp->id.base.link_len[1] * 100);
-+		else if (sfp->id.base.link_len[0])
-+			sprintf(len_9um, "%ukm", sfp->id.base.link_len[0]);
-+		else if (sfp->id.base.link_len[1] == 255)
-+			strcpy(len_9um, ">25.4km");
-+		else
-+			strcpy(len_9um, "unsupported");
-+
-+		dev_info(sfp->dev, "    9µm SM    : %s\n", len_9um);
-+		dev_info(sfp->dev, " 62.5µm MM OM1: %s\n",
-+			 sfp_link_len(len_om, sizeof(len_om),
-+				      sfp->id.base.link_len[3], 10));
-+		dev_info(sfp->dev, "   50µm MM OM2: %s\n",
-+			 sfp_link_len(len_om, sizeof(len_om),
-+				      sfp->id.base.link_len[2], 10));
-+		dev_info(sfp->dev, "   50µm MM OM3: %s\n",
-+			 sfp_link_len(len_om, sizeof(len_om),
-+				      sfp->id.base.link_len[5], 10));
-+		dev_info(sfp->dev, "   50µm MM OM4: %s\n",
-+			 sfp_link_len(len_om, sizeof(len_om),
-+				      sfp->id.base.link_len[4], 10));
-+	} else {
-+		char len[16];
-+		dev_info(sfp->dev, "  Copper length: %s\n",
-+			 sfp_link_len(len, sizeof(len),
-+				      sfp->id.base.link_len[4], 1));
-+	}
-+
-+	dev_info(sfp->dev, "  Options: %s\n",
-+		 sfp_bitfield(options, sizeof(options), sfp_options,
-+			      be16_to_cpu(sfp->id.ext.options)));
-+	dev_info(sfp->dev, "  Diagnostics: %s\n",
-+		 sfp_bitfield(options, sizeof(options), diagmon,
-+			      sfp->id.ext.diagmon));
- 
- 	/* Check whether we support this module */
- 	if (!sfp->type->module_supported(&sfp->id)) {
diff --git a/target/linux/mvebu/patches-4.19/408-sfp-more-cotsworks-fixes.patch b/target/linux/mvebu/patches-4.19/408-sfp-more-cotsworks-fixes.patch
deleted file mode 100644
index 69a31cb9f06c..000000000000
--- a/target/linux/mvebu/patches-4.19/408-sfp-more-cotsworks-fixes.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From e26af2726067ff260b77485df6af8375b82bfb1d Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel at armlinux.org.uk>
-Date: Sat, 23 Dec 2017 12:22:58 +0000
-Subject: [PATCH] sfp: more cotsworks fixes
-
-Cotsworks also gets the date code wrong.
-
-Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 15 ++++++++-------
- 1 file changed, 8 insertions(+), 7 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1571,9 +1571,9 @@ static int sfp_sm_mod_probe(struct sfp *
- 		return -EAGAIN;
- 	}
- 
--	/* Cotsworks do not seem to update the checksums when they
--	 * do the final programming with the final module part number,
--	 * serial number and date code.
-+	/* Cotsworks do not seem to update the checksums when they update the
-+	 * module part number, serial number and date code. They also format
-+	 * the date code incorrectly.
- 	 */
- 	cotsworks = !memcmp(id.base.vendor_name, "COTSWORKS       ", 16);
- 
-@@ -1612,11 +1612,12 @@ static int sfp_sm_mod_probe(struct sfp *
- 
- 	sfp->id = id;
- 
--	date[0] = sfp->id.ext.datecode[4];
--	date[1] = sfp->id.ext.datecode[5];
-+	/* Cotsworks also gets the date code wrong. */
-+	date[0] = sfp->id.ext.datecode[4 - 2 * cotsworks];
-+	date[1] = sfp->id.ext.datecode[5 - 2 * cotsworks];
- 	date[2] = '-';
--	date[3] = sfp->id.ext.datecode[2];
--	date[4] = sfp->id.ext.datecode[3];
-+	date[3] = sfp->id.ext.datecode[2 + 2 * cotsworks];
-+	date[4] = sfp->id.ext.datecode[3 + 2 * cotsworks];
- 	date[5] = '-';
- 	date[6] = sfp->id.ext.datecode[0];
- 	date[7] = sfp->id.ext.datecode[1];
diff --git a/target/linux/mvebu/patches-4.19/450-reprobe_sfp_phy.patch b/target/linux/mvebu/patches-4.19/450-reprobe_sfp_phy.patch
deleted file mode 100644
index 833c515a111f..000000000000
--- a/target/linux/mvebu/patches-4.19/450-reprobe_sfp_phy.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 28baa5e2635285b178326b301f534ed95c65dd01 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski at gmail.com>
-Date: Thu, 29 Sep 2016 11:44:39 +0200
-Subject: [PATCH] sfp: retry phy probe if unsuccessful
-
-Some phys seem to take longer than 50 ms to come out of reset, so retry
-until we find a phy.
-
-Signed-off-by: Jonas Gorski <jonas.gorski at gmail.com>
----
- drivers/net/phy/sfp.c | 38 +++++++++++++++++++++++++-------------
- 1 file changed, 25 insertions(+), 13 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1374,7 +1374,7 @@ static void sfp_sm_phy_detach(struct sfp
- 	sfp->mod_phy = NULL;
- }
- 
--static void sfp_sm_probe_phy(struct sfp *sfp)
-+static int sfp_sm_probe_phy(struct sfp *sfp)
- {
- 	struct phy_device *phy;
- 	int err;
-@@ -1384,11 +1384,11 @@ static void sfp_sm_probe_phy(struct sfp
- 	phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
- 	if (phy == ERR_PTR(-ENODEV)) {
- 		dev_info(sfp->dev, "no PHY detected\n");
--		return;
-+		return -EAGAIN;
- 	}
- 	if (IS_ERR(phy)) {
- 		dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
--		return;
-+		return PTR_ERR(phy);
- 	}
- 
- 	err = sfp_add_phy(sfp->sfp_bus, phy);
-@@ -1396,11 +1396,13 @@ static void sfp_sm_probe_phy(struct sfp
- 		phy_device_remove(phy);
- 		phy_device_free(phy);
- 		dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err);
--		return;
-+		return err;
- 	}
- 
- 	sfp->mod_phy = phy;
- 	phy_start(phy);
-+
-+	return 0;
- }
- 
- static void sfp_sm_link_up(struct sfp *sfp)
-@@ -1464,14 +1466,9 @@ static void sfp_sm_fault(struct sfp *sfp
- 
- static void sfp_sm_mod_init(struct sfp *sfp)
- {
--	sfp_module_tx_enable(sfp);
-+	int ret = 0;
- 
--	/* Wait t_init before indicating that the link is up, provided the
--	 * current state indicates no TX_FAULT.  If TX_FAULT clears before
--	 * this time, that's fine too.
--	 */
--	sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
--	sfp->sm_retries = 5;
-+	sfp_module_tx_enable(sfp);
- 
- 	/* Setting the serdes link mode is guesswork: there's no
- 	 * field in the EEPROM which indicates what mode should
-@@ -1485,7 +1482,22 @@ static void sfp_sm_mod_init(struct sfp *
- 	if (sfp->id.base.e1000_base_t ||
- 	    sfp->id.base.e100_base_lx ||
- 	    sfp->id.base.e100_base_fx)
--		sfp_sm_probe_phy(sfp);
-+		ret = sfp_sm_probe_phy(sfp);
-+
-+	if (!ret) {
-+		/* Wait t_init before indicating that the link is up, provided
-+		 * the current state indicates no TX_FAULT.  If TX_FAULT clears
-+		 * this time, that's fine too.
-+		 */
-+		sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-+		sfp->sm_retries = 5;
-+		return;
-+	}
-+
-+	if (ret == -EAGAIN)
-+		sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+	else
-+		sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
- }
- 
- static int sfp_sm_mod_hpower(struct sfp *sfp)
-- 
2.20.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list