[OpenWrt-Devel] [PATCH 2/2] apm821xx: wndr4700: interrupt-driven gpio-keys

[Christian Lamparter]

This patch fixes the active_low setting and
converts all of the physical keys on the wndr4700
to utilize the interrupt-driven gpio-keys driver
over the polled version.

The sdcard-insertion hack has been removed since the
block-subsystem will now be polling the device instead.

Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
---
 .../linux/apm821xx/dts/netgear-wndr4700.dts   | 20 ++++++-------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff --git a/target/linux/apm821xx/dts/netgear-wndr4700.dts b/target/linux/apm821xx/dts/netgear-wndr4700.dts
index 0f1e97a921..24d5c33f90 100644
--- a/target/linux/apm821xx/dts/netgear-wndr4700.dts
+++ b/target/linux/apm821xx/dts/netgear-wndr4700.dts
@@ -307,23 +307,21 @@
 };
 
 &POB0 {
+
 	keys {
-		compatible = "gpio-keys-polled";
-		#interrupt-cells = <2>;
-		autorepeat;
-		poll-interval = <60>;   /* 3 * 20 = 60ms */
+		compatible = "gpio-keys";
 
 		reset {
 			label = "Reset button";
+			gpios = <&GPIO0 15 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
-			gpios = <&GPIO0 15 GPIO_ACTIVE_HIGH>;
 			interrupt-parent = <&UIC1>;
 			interrupts = <0x14 IRQ_TYPE_EDGE_FALLING>;
 		};
 
 		backup_hd {
 			label = "Backup HD button";
-			gpios = <&GPIO0 19 GPIO_ACTIVE_HIGH>;
+			gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 			interrupt-parent = <&UIC1>;
 			interrupts = <0x1e IRQ_TYPE_EDGE_FALLING>;
@@ -331,7 +329,7 @@
 
 		rfkill {
 			label = "RFKILL button";
-			gpios = <&GPIO0 20 GPIO_ACTIVE_HIGH>;
+			gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RFKILL>;
 			interrupt-parent = <&UIC1>;
 			interrupts = <0x1f IRQ_TYPE_EDGE_FALLING>;
@@ -339,17 +337,11 @@
 
 		wps {
 			label = "WPS button";
-			gpios = <&GPIO0 23 GPIO_ACTIVE_HIGH>;
+			gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WPS_BUTTON>;
 			interrupt-parent = <&UIC2>;
 			interrupts = <0x19 IRQ_TYPE_EDGE_FALLING>;
 		};
-
-		sdcard {
-			label = "SDCard inserted";
-			gpios = <&GPIO0 7 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_1>;
-		};
 	};
 
 	leds {
-- 
2.20.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel