[OpenWrt-Devel] [PATCH v5] kernel: lantiq: add support for SMP IRQ routing
Hauke Mehrtens
hauke at hauke-m.de
Sun May 19 17:45:54 EDT 2019
Hi Petr,
Thank you for the patch.
On 5/17/19 5:44 AM, Petr Cvek wrote:
> Some lantiq SoCs have multiple VPE support but no support for the IRQ
> routing, so only the first VPE is receiving interrupts. This patch adds
> support for rerouting interrupts to the other VPE. Basically it expands
> the current ICU driver for the second controller, adds new address
> ranges to the devicetree and fixes the interrupt masking on the second
> core.
> Some reg access locking was added too.
>
> The mode of the operation is that userdefined IRQ affinity CPU mask is
> either cycled between VPEs in every IRQ enable call
> (AUTO_AFFINITY_ROTATION), or only the first VPE from affinity CPU mask
> is used (AUTO_AFFINITY_ROTATION not defined).
>
> Tested on TD-W9980B device (both VPEs used as linux CPUs).
>
> Signed-off-by: Petr Cvek <petrcvekcz at gmail.com>
It would be nice if you could split this up into multiple patches and
also send to the Linux mips mailling list to get this into mainline
Linux kernel. We can get it then in paralle into OpenWrt and upstream Linux.
> ---
> .../0901-add-icu-smp-support.patch | 436 ++++++++++++++++++
> 1 file changed, 436 insertions(+)
> create mode 100644
> target/linux/lantiq/patches-4.14/0901-add-icu-smp-support.patch
>
> diff --git
> a/target/linux/lantiq/patches-4.14/0901-add-icu-smp-support.patch
> b/target/linux/lantiq/patches-4.14/0901-add-icu-smp-support.patch
> new file mode 100644
> index 0000000000..eaefdf27a3
> --- /dev/null
> +++ b/target/linux/lantiq/patches-4.14/0901-add-icu-smp-support.patch
> @@ -0,0 +1,436 @@
> +--- a/arch/mips/lantiq/irq.c 2019-03-10 20:44:58.755134326 +0100
> ++++ b/arch/mips/lantiq/irq.c 2019-05-17 05:13:50.302149058 +0200
> +@@ -22,14 +22,21 @@
> + #include <lantiq_soc.h>
> + #include <irq.h>
> + ++/*
> ++ * If defined, every IRQ enable call will switch the interrupt to
> ++ * the other VPE. You can limit used VPEs from the userspace.
> ++ *
> ++ * If not defined, only the first configured VPE from the userspace
> ++ * will be used.
> ++ */
> ++#define AUTO_AFFINITY_ROTATION
> ++
> + /* register definitions - internal irqs */
> +-#define LTQ_ICU_IM0_ISR 0x0000
> +-#define LTQ_ICU_IM0_IER 0x0008
> +-#define LTQ_ICU_IM0_IOSR 0x0010
> +-#define LTQ_ICU_IM0_IRSR 0x0018
> +-#define LTQ_ICU_IM0_IMR 0x0020
> +-#define LTQ_ICU_IM1_ISR 0x0028
> +-#define LTQ_ICU_OFFSET (LTQ_ICU_IM1_ISR - LTQ_ICU_IM0_ISR)
> ++#define LTQ_ICU_ISR 0x0000
> ++#define LTQ_ICU_IER 0x0008
> ++#define LTQ_ICU_IOSR 0x0010
> ++#define LTQ_ICU_IRSR 0x0018
> ++#define LTQ_ICU_IMR 0x0020
> + + /* register definitions - external irqs */
> + #define LTQ_EIU_EXIN_C 0x0000
> +@@ -49,24 +56,27 @@
> + */
> + #define LTQ_ICU_EBU_IRQ 22
> + +-#define ltq_icu_w32(m, x, y) ltq_w32((x), ltq_icu_membase[m] + (y))
This line looks strange.
It looks like your mail client broke the patch, I would suggest to use
"git send-email" to send patches to mailing lists.
> +-#define ltq_icu_r32(m, x) ltq_r32(ltq_icu_membase[m] + (x))
> ++#define ltq_icu_w32(vpe, m, x, y) \
> ++ ltq_w32((x), ltq_icu_membase[vpe] + m*0x28 + (y))
> ++
> ++#define ltq_icu_r32(vpe, m, x) \
> ++ ltq_r32(ltq_icu_membase[vpe] + m*0x28 + (x))
> + + #define ltq_eiu_w32(x, y) ltq_w32((x), ltq_eiu_membase + (y))
> + #define ltq_eiu_r32(x) ltq_r32(ltq_eiu_membase + (x))
> + +-/* our 2 ipi interrupts for VSMP */
> +-#define MIPS_CPU_IPI_RESCHED_IRQ 0
> +-#define MIPS_CPU_IPI_CALL_IRQ 1
> +-
> + /* we have a cascade of 8 irqs */
> + #define MIPS_CPU_IRQ_CASCADE 8
> + ++#define MAX_VPES 2
> ++
> + static int exin_avail;
> + static u32 ltq_eiu_irq[MAX_EIU];
> +-static void __iomem *ltq_icu_membase[MAX_IM];
> ++static void __iomem *ltq_icu_membase[MAX_VPES];
> + static void __iomem *ltq_eiu_membase;
> + static struct irq_domain *ltq_domain;
> ++static DEFINE_SPINLOCK(ltq_eiu_lock);
> ++static DEFINE_RAW_SPINLOCK(ltq_icu_lock);
> + static int ltq_perfcount_irq;
> + + int ltq_eiu_get_irq(int exin)
> +@@ -78,50 +88,104 @@
> + + void ltq_disable_irq(struct irq_data *d)
> + {
> +- u32 ier = LTQ_ICU_IM0_IER;
> +- int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE;
> +- int im = offset / INT_NUM_IM_OFFSET;
> ++ unsigned long offset = d->hwirq - MIPS_CPU_IRQ_CASCADE;
When you want to upstream this I would suggest to split this into
multiple patches. One should only change the int to unsigned long for
example to make the review easier.
> ++ unsigned long im = offset / INT_NUM_IM_OFFSET;
> ++ unsigned int vpe;
> ++ unsigned long flags;
> + + offset %= INT_NUM_IM_OFFSET;
> +- ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
> ++
> ++ raw_spin_lock_irqsave(<q_icu_lock, flags);
> ++ for_each_present_cpu(vpe) {
> ++ ltq_icu_w32(vpe, im,
> ++ ltq_icu_r32(vpe, im, LTQ_ICU_IER) & ~BIT(offset),
> ++ LTQ_ICU_IER);
> ++ }
> ++ raw_spin_unlock_irqrestore(<q_icu_lock, flags);
> + }
> + + void ltq_mask_and_ack_irq(struct irq_data *d)
> + {
> +- u32 ier = LTQ_ICU_IM0_IER;
> +- u32 isr = LTQ_ICU_IM0_ISR;
> +- int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE;
> +- int im = offset / INT_NUM_IM_OFFSET;
> ++ unsigned long offset = d->hwirq - MIPS_CPU_IRQ_CASCADE;
> ++ unsigned long im = offset / INT_NUM_IM_OFFSET;
> ++ unsigned int vpe;
> ++ unsigned long flags;
> + + offset %= INT_NUM_IM_OFFSET;
> +- ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
> +- ltq_icu_w32(im, BIT(offset), isr);
> ++
> ++ raw_spin_lock_irqsave(<q_icu_lock, flags);
> ++ for_each_present_cpu(vpe) {
> ++ ltq_icu_w32(vpe, im,
> ++ ltq_icu_r32(vpe, im, LTQ_ICU_IER) & ~BIT(offset),
> ++ LTQ_ICU_IER);
> ++ ltq_icu_w32(vpe, im, BIT(offset), LTQ_ICU_ISR);
> ++ }
> ++ raw_spin_unlock_irqrestore(<q_icu_lock, flags);
> + }
> + EXPORT_SYMBOL(ltq_mask_and_ack_irq);
> + + static void ltq_ack_irq(struct irq_data *d)
> + {
> +- u32 isr = LTQ_ICU_IM0_ISR;
> +- int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE;
> +- int im = offset / INT_NUM_IM_OFFSET;
> ++ unsigned long offset = d->hwirq - MIPS_CPU_IRQ_CASCADE;
> ++ unsigned long im = offset / INT_NUM_IM_OFFSET;
> ++ unsigned int vpe;
> ++ unsigned long flags;
> + + offset %= INT_NUM_IM_OFFSET;
> +- ltq_icu_w32(im, BIT(offset), isr);
> ++
> ++ raw_spin_lock_irqsave(<q_icu_lock, flags);
> ++ for_each_present_cpu(vpe) {
> ++ ltq_icu_w32(vpe, im, BIT(offset), LTQ_ICU_ISR);
> ++ }
> ++ raw_spin_unlock_irqrestore(<q_icu_lock, flags);
> + }
> + + void ltq_enable_irq(struct irq_data *d)
> + {
> +- u32 ier = LTQ_ICU_IM0_IER;
> +- int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE;
> +- int im = offset / INT_NUM_IM_OFFSET;
> ++ unsigned long offset = d->hwirq - MIPS_CPU_IRQ_CASCADE;
> ++ unsigned long im = offset / INT_NUM_IM_OFFSET;
> ++ unsigned int vpe;
> ++ unsigned long flags;
> + + offset %= INT_NUM_IM_OFFSET;
> +- ltq_icu_w32(im, ltq_icu_r32(im, ier) | BIT(offset), ier);
> ++
> ++#if defined(AUTO_AFFINITY_ROTATION)
Have you seen such feature in any other upstream IRQ driver?
This automatic assignment of IRQs to VPEs looks a little bit strange to
me, but I am also not an expter on IRQs.
> ++ vpe = cpumask_next(smp_processor_id(),
> ++ irq_data_get_effective_affinity_mask(d));
> ++
> ++ /*
> ++ * There is a theoretical race condition if affinity gets changed
> ++ * meanwhile, but it would only caused a wrong VPE to be used until
> ++ * the next IRQ enable. Also the SoC has only 2 VPEs which fits
> ++ * the single u32. You can move spinlock before first mask readout
> ++ * and add it to ltq_icu_irq_set_affinity.
> ++ */
> ++
> ++ if (vpe >= nr_cpu_ids)
> ++ vpe = cpumask_first(irq_data_get_effective_affinity_mask(d));
> ++#else
> ++ vpe = cpumask_first(irq_data_get_effective_affinity_mask(d));
> ++#endif
> ++
> ++ /* This shouldn't be even possible, maybe during CPU hotplug spam */
> ++ if (unlikely(vpe >= nr_cpu_ids))
> ++ vpe = smp_processor_id();
> ++
> ++ raw_spin_lock_irqsave(<q_icu_lock, flags);
> ++
> ++ /* bugfix for fake interrupts? from UGW 3.x kernel */
> ++ ltq_icu_w32(vpe, im, BIT(offset), LTQ_ICU_ISR);
It could be that some (broken) bootloader does not deactivate all the
IRQs when the control is given to Linux. Do you need this change,
otherwise I would just deactivate all IRQs in the probe function.
> ++
> ++ ltq_icu_w32(vpe, im, ltq_icu_r32(vpe, im, LTQ_ICU_IER) | BIT(offset),
> ++ LTQ_ICU_IER);
> ++
> ++ raw_spin_unlock_irqrestore(<q_icu_lock, flags);
> + }
> + + static int ltq_eiu_settype(struct irq_data *d, unsigned int type)
> + {
> + int i;
> ++ unsigned long flags;
> + + for (i = 0; i < exin_avail; i++) {
> + if (d->hwirq == ltq_eiu_irq[i]) {
> +@@ -158,8 +222,12 @@
> + if (edge)
> + irq_set_handler(d->hwirq, handle_edge_irq);
> + +- ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) |
> +- (val << (i * 4)), LTQ_EIU_EXIN_C);
> ++ // v3.10 kernel has this atomic for SMP
> ++ spin_lock_irqsave(<q_eiu_lock, flags);
> ++ ltq_eiu_w32((ltq_eiu_r32(LTQ_EIU_EXIN_C) &
> ++ (~(7 << (i * 4)))) | (val << (i * 4)),
> ++ LTQ_EIU_EXIN_C);
> ++ spin_unlock_irqrestore(<q_eiu_lock, flags);
> + }
> + }
> + +@@ -203,6 +271,21 @@
> + }
> + }
> + ++#if defined(CONFIG_SMP)
> ++static int ltq_icu_irq_set_affinity(struct irq_data *d,
> ++ const struct cpumask *cpumask, bool force)
> ++{
> ++ struct cpumask tmask;
> ++
> ++ if (!cpumask_and(&tmask, cpumask, cpu_online_mask))
> ++ return -EINVAL;
> ++
> ++ irq_data_update_effective_affinity(d, &tmask);
> ++
> ++ return IRQ_SET_MASK_OK;
> ++}
> ++#endif
> ++
> + static struct irq_chip ltq_irq_type = {
> + .name = "icu",
> + .irq_enable = ltq_enable_irq,
> +@@ -211,6 +294,9 @@
> + .irq_ack = ltq_ack_irq,
> + .irq_mask = ltq_disable_irq,
> + .irq_mask_ack = ltq_mask_and_ack_irq,
> ++#if defined(CONFIG_SMP)
> ++ .irq_set_affinity = ltq_icu_irq_set_affinity,
> ++#endif
> + };
> + + static struct irq_chip ltq_eiu_type = {
> +@@ -224,15 +310,19 @@
> + .irq_mask = ltq_disable_irq,
> + .irq_mask_ack = ltq_mask_and_ack_irq,
> + .irq_set_type = ltq_eiu_settype,
> ++#if defined(CONFIG_SMP)
> ++ .irq_set_affinity = ltq_icu_irq_set_affinity,
> ++#endif
> + };
> + + static void ltq_hw_irq_handler(struct irq_desc *desc)
> + {
> +- int module = irq_desc_get_irq(desc) - 2;
> ++ unsigned int module = irq_desc_get_irq(desc) - 2;
> + u32 irq;
> +- int hwirq;
> ++ irq_hw_number_t hwirq;
> ++ unsigned int vpe = smp_processor_id();
> + +- irq = ltq_icu_r32(module, LTQ_ICU_IM0_IOSR);
> ++ irq = ltq_icu_r32(vpe, module, LTQ_ICU_IOSR);
> + if (irq == 0)
> + return;
> + +@@ -253,6 +343,7 @@
> + static int icu_map(struct irq_domain *d, unsigned int irq,
> irq_hw_number_t hw)
> + {
> + struct irq_chip *chip = <q_irq_type;
> ++ struct irq_data *data;
> + int i;
> + + if (hw < MIPS_CPU_IRQ_CASCADE)
> +@@ -262,6 +353,10 @@
> + if (hw == ltq_eiu_irq[i])
> + chip = <q_eiu_type;
> + ++ data = irq_get_irq_data(irq);
> ++
> ++ irq_data_update_effective_affinity(data, cpumask_of(0));
> ++
> + irq_set_chip_and_handler(irq, chip, handle_level_irq);
> + + return 0;
> +@@ -276,28 +371,40 @@
> + {
> + struct device_node *eiu_node;
> + struct resource res;
> +- int i, ret;
> ++ int i, ret, vpe;
> + +- for (i = 0; i < MAX_IM; i++) {
> +- if (of_address_to_resource(node, i, &res))
> +- panic("Failed to get icu memory range");
> ++ /* TODO someone pls update+test devicetr5ee for danube (not SMP,
> ++ * foreach bellow should run once), ar9, amazon, falcon (no info).
> ++ * Addresses are known only for vr9, tested only in generic SMP
> ++ * ( = no VPE reserved for firmware).
> ++ */
> ++ for_each_possible_cpu(vpe) {
> ++ if (of_address_to_resource(node, vpe, &res))
> ++ panic("Failed to get icu%i memory range", vpe);
> + + if (!request_mem_region(res.start, resource_size(&res),
> + res.name))
> +- pr_err("Failed to request icu memory");
> ++ pr_err("Failed to request icu%i memory\n", vpe);
> + +- ltq_icu_membase[i] = ioremap_nocache(res.start,
> ++ ltq_icu_membase[vpe] = ioremap_nocache(res.start,
> + resource_size(&res));
> +- if (!ltq_icu_membase[i])
> +- panic("Failed to remap icu memory");
> ++
> ++ if (!ltq_icu_membase[vpe])
> ++ panic("Failed to remap icu%i memory", vpe);
> + }
> + + /* turn off all irqs by default */
> +- for (i = 0; i < MAX_IM; i++) {
> +- /* make sure all irqs are turned off by default */
> +- ltq_icu_w32(i, 0, LTQ_ICU_IM0_IER);
> +- /* clear all possibly pending interrupts */
> +- ltq_icu_w32(i, ~0, LTQ_ICU_IM0_ISR);
> ++ for_each_possible_cpu(vpe) {
> ++ for (i = 0; i < MAX_IM; i++) {
> ++ /* make sure all irqs are turned off by default */
> ++ ltq_icu_w32(vpe, i, 0, LTQ_ICU_IER);
> ++
> ++ /* clear all possibly pending interrupts */
> ++ ltq_icu_w32(vpe, i, ~0, LTQ_ICU_ISR);
> ++ ltq_icu_w32(vpe, i, ~0, LTQ_ICU_IMR);
> ++
> ++ ltq_icu_w32(vpe, i, 0, LTQ_ICU_IRSR);
> ++ }
> + }
> + + mips_cpu_irq_init();
> +@@ -358,7 +465,7 @@
> + return MIPS_CPU_TIMER_IRQ;
> + }
> + +-static struct of_device_id __initdata of_irq_ids[] = {
> ++static const struct of_device_id of_irq_ids[] __initconst = {
> + { .compatible = "lantiq,icu", .data = icu_of_init },
> + {},
> + };
> +--- a/arch/mips/kernel/smp-mt.c 2019-03-05 17:58:03.000000000 +0100
> ++++ b/arch/mips/kernel/smp-mt.c 2019-05-16 03:09:02.268859090 +0200
> +@@ -125,6 +125,8 @@
> + STATUSF_IP6 | STATUSF_IP7);
> + else
> + change_c0_status(ST0_IM, STATUSF_IP0 | STATUSF_IP1 |
> ++ STATUSF_IP2 | STATUSF_IP3 |
> ++ STATUSF_IP4 | STATUSF_IP5 |
> + STATUSF_IP6 | STATUSF_IP7);
> + }
This change should go into a seperate patch which also describes why you
need this.
> + +--- a/arch/mips/boot/dts/vr9.dtsi 2019-03-10 19:03:35.747182390 +0100
> ++++ b/arch/mips/boot/dts/vr9.dtsi 2019-05-17 05:01:36.789319230 +0200
> +@@ -38,11 +38,9 @@
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + compatible = "lantiq,icu";
> +- reg = <0x80200 0x28
> +- 0x80228 0x28
> +- 0x80250 0x28
> +- 0x80278 0x28
> +- 0x802a0 0x28>;
> ++
> ++ reg = <0x80200 0xc8 /* icu0 */
> ++ 0x80300 0xc8>; /* icu1 */
> + };
> + + watchdog at 803f0 {
> +--- a/arch/mips/boot/dts/danube.dtsi 2019-03-10 19:03:35.746182403 +0100
> ++++ b/arch/mips/boot/dts/danube.dtsi 2019-05-17 04:55:28.777920006 +0200
> +@@ -34,11 +34,12 @@
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + compatible = "lantiq,icu";
> +- reg = <0x80200 0x28
> +- 0x80228 0x28
> +- 0x80250 0x28
> +- 0x80278 0x28
> +- 0x802a0 0x28>;
> ++
> ++ /*
> ++ * There is a second ICU, but the SoC is not SMP
> ++ * capable.
> ++ */
> ++ reg = <0x80200 0xc8>;
> + };
> + + watchdog at 803f0 {
> +--- a/arch/mips/boot/dts/ar9.dtsi 2019-03-10 19:03:35.746182403 +0100
> ++++ b/arch/mips/boot/dts/ar9.dtsi 2019-05-17 04:58:17.080815930 +0200
> +@@ -34,11 +34,8 @@
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + compatible = "lantiq,icu";
> +- reg = <0x80200 0x28
> +- 0x80228 0x28
> +- 0x80250 0x28
> +- 0x80278 0x28
> +- 0x802a0 0x28>;
> ++ reg = <0x80200 0xc8>; /* ICU0 */
> ++ /* TODO AR9 should have ICU1 (like VR9) too */
Yes this is similar to VR9.
> + };
> + + watchdog at 803f0 {
> +--- a/arch/mips/boot/dts/amazonse.dtsi 2019-03-10 19:03:35.746182403 +0100
> ++++ b/arch/mips/boot/dts/amazonse.dtsi 2019-05-17 04:58:56.343325081 +0200
> +@@ -34,11 +34,7 @@
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + compatible = "lantiq,icu";
> +- reg = <0x80200 0x28
> +- 0x80228 0x28
> +- 0x80250 0x28
> +- 0x80278 0x28
> +- 0x802a0 0x28>;
> ++ reg = <0x80200 0xc8>; /* only 1 ICU */
> + };
> + + watchdog at 803f0 {
> +--- a/arch/mips/boot/dts/falcon.dtsi 2019-03-10 19:03:35.747182390 +0100
> ++++ b/arch/mips/boot/dts/falcon.dtsi 2019-05-17 05:00:42.536997478 +0200
> +@@ -293,11 +293,8 @@
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + compatible = "lantiq,icu";
> +- reg = <0x80200 0x28
> +- 0x80228 0x28
> +- 0x80250 0x28
> +- 0x80278 0x28
> +- 0x802a0 0x28>;
> ++ reg = <0x80200 0xc8>;
> ++ /* TODO I don't know if there is another ICU */
The 2. ICU is at 0x80300, size is 0xe0 for both ICUs.
> + };
> + + watchdog at 803F0 {
>
Hauke
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list