[OpenWrt-Devel] [PATCH v2 7/8] mvebu: use device-tree board detection
Tomasz Maciej Nowak
tomek_n at o2.pl
Thu May 9 09:26:27 EDT 2019
Convert whole target to Device Tree based board detection instead of
identifying devices by dts file name. With this we can drop mvebu.sh
translation script and rely on common method for model detection.
Signed-off-by: Tomasz Maciej Nowak <tomek_n at o2.pl>
---
.../mvebu/base-files/etc/board.d/01_leds | 22 ++---
.../mvebu/base-files/etc/board.d/02_network | 60 ++++++------
target/linux/mvebu/base-files/etc/diag.sh | 16 ++--
.../base-files/etc/init.d/linksys_recovery | 2 +-
.../base-files/etc/uci-defaults/03_wireless | 4 +-
.../base-files/etc/uci-defaults/04_mambafan | 2 +-
target/linux/mvebu/base-files/lib/mvebu.sh | 94 -------------------
.../mvebu/base-files/lib/preinit/01_sysinfo | 9 --
.../base-files/lib/preinit/06_set_iface_mac | 14 +--
.../base-files/lib/preinit/79_move_config | 2 +-
.../base-files/lib/preinit/81_linksys_syscfg | 2 +-
.../mvebu/base-files/lib/upgrade/platform.sh | 10 +-
.../mvebu/base-files/lib/upgrade/sdcard.sh | 2 +-
target/linux/mvebu/image/Makefile | 2 +-
target/linux/mvebu/image/cortex-a53.mk | 2 -
target/linux/mvebu/image/cortex-a72.mk | 2 -
target/linux/mvebu/image/cortex-a9.mk | 20 +++-
17 files changed, 86 insertions(+), 179 deletions(-)
delete mode 100755 target/linux/mvebu/base-files/lib/mvebu.sh
delete mode 100644 target/linux/mvebu/base-files/lib/preinit/01_sysinfo
diff --git a/target/linux/mvebu/base-files/etc/board.d/01_leds b/target/linux/mvebu/base-files/etc/board.d/01_leds
index ff8d4a21c0..14313ee664 100755
--- a/target/linux/mvebu/base-files/etc/board.d/01_leds
+++ b/target/linux/mvebu/base-files/etc/board.d/01_leds
@@ -11,42 +11,42 @@ board_config_update
board=$(board_name)
case "$board" in
-armada-385-linksys-caiman)
+linksys,caiman)
ucidef_set_led_netdev "wan" "WAN" "pca963x:caiman:white:wan" "eth1"
ucidef_set_led_usbport "usb1" "USB 1" "pca963x:caiman:white:usb2" "usb1-port1"
ucidef_set_led_usbport "usb2" "USB 2" "pca963x:caiman:white:usb3_1" "usb2-port1" "usb3-port1"
ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:caiman:white:usb3_2" "usb3-port1"
;;
-armada-385-linksys-cobra)
+linksys,cobra)
ucidef_set_led_netdev "wan" "WAN" "pca963x:cobra:white:wan" "eth1"
ucidef_set_led_usbport "usb1" "USB 1" "pca963x:cobra:white:usb2" "usb1-port1"
ucidef_set_led_usbport "usb2" "USB 2" "pca963x:cobra:white:usb3_1" "usb2-port1" "usb3-port1"
ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:cobra:white:usb3_2" "usb3-port1"
;;
-armada-385-linksys-rango)
+linksys,mamba)
+ ucidef_set_led_netdev "wan" "WAN" "mamba:white:wan" "eth1"
+ ucidef_set_led_usbport "usb1" "USB 1" "mamba:white:usb2" "usb1-port1"
+ ucidef_set_led_usbport "usb2" "USB 2" "mamba:white:usb3_1" "usb2-port1" "usb3-port1"
+ ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "mamba:white:usb3_2" "usb3-port2"
+ ;;
+linksys,rango)
ucidef_set_led_netdev "wan" "WAN" "pca963x:rango:white:wan" "eth1"
ucidef_set_led_usbport "usb1" "USB 1" "pca963x:rango:white:usb2" "usb1-port1"
ucidef_set_led_usbport "usb2" "USB 2" "pca963x:rango:white:usb3_1" "usb2-port1" "usb3-port1"
ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:rango:white:usb3_2" "usb3-port1"
;;
-armada-385-linksys-shelby)
+linksys,shelby)
ucidef_set_led_netdev "wan" "WAN" "pca963x:shelby:white:wan" "eth1"
ucidef_set_led_usbport "usb1" "USB 1" "pca963x:shelby:white:usb2" "usb1-port1"
ucidef_set_led_usbport "usb2" "USB 2" "pca963x:shelby:white:usb3_1" "usb2-port1" "usb3-port1"
ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:shelby:white:usb3_2" "usb3-port1"
;;
-armada-385-linksys-venom)
+linksys,venom)
ucidef_set_led_netdev "wan" "WAN" "pca963x:venom:blue:wan" "eth1"
ucidef_set_led_usbport "usb1" "USB 1" "pca963x:venom:blue:usb2" "usb1-port1"
ucidef_set_led_usbport "usb2" "USB 2" "pca963x:venom:blue:usb3_1" "usb2-port1" "usb3-port1"
ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:venom:blue:usb3_2" "usb3-port1"
;;
-armada-xp-linksys-mamba)
- ucidef_set_led_netdev "wan" "WAN" "mamba:white:wan" "eth1"
- ucidef_set_led_usbport "usb1" "USB 1" "mamba:white:usb2" "usb1-port1"
- ucidef_set_led_usbport "usb2" "USB 2" "mamba:white:usb3_1" "usb2-port1" "usb3-port1"
- ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "mamba:white:usb3_2" "usb3-port2"
- ;;
esac
diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network
index 2c10154925..f099a078b2 100755
--- a/target/linux/mvebu/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/base-files/etc/board.d/02_network
@@ -11,24 +11,42 @@ board_config_update
board=$(board_name)
case "$board" in
-armada-385-db-ap)
- ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2"
+cznic,turris-omnia)
+ ucidef_set_interface_lan "lan0 lan1 lan2 lan3 lan4"
+ ucidef_set_interface_wan "eth2"
+ ;;
+globalscale,espressobin)
+ ucidef_set_interfaces_lan_wan "lan0 lan1" "wan"
;;
-armada-385-linksys-caiman|\
-armada-385-linksys-cobra|\
-armada-385-linksys-rango|\
-armada-385-linksys-shelby|\
-armada-385-linksys-venom|\
-armada-xp-linksys-mamba)
+linksys,caiman|\
+linksys,cobra|\
+linksys,mamba|\
+linksys,rango|\
+linksys,shelby|\
+linksys,venom)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5 at eth0" "4:wan" "6 at eth1"
;;
-armada-385-turris-omnia)
- ucidef_set_interface_lan "lan0 lan1 lan2 lan3 lan4"
- ucidef_set_interface_wan "eth2"
+marvell,a385-db-ap)
+ ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2"
+ ;;
+marvell,armada8040-mcbin)
+ ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2"
+ ;;
+marvell,armada8040-db)
+ ucidef_set_interfaces_lan_wan "eth0 eth2 eth3" "eth1"
+ ;;
+marvell,armada7040-db)
+ ucidef_set_interfaces_lan_wan "eth0 eth2" "eth1"
+ ;;
+marvell,armada-3720-db)
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ ;;
+marvell,axp-gp)
+ ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
;;
-armada-388-clearfog-*)
+solidrun,clearfog*a1)
# eth0 is standalone ethernet
# eth1 is switch (-pro) or standalone ethernet (-base)
# eth2 is SFP
@@ -40,24 +58,6 @@ armada-388-clearfog-*)
ucidef_add_switch "switch0" \
"0:lan:5" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5u at eth1" "6:lan:6"
;;
-armada-xp-gp)
- ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
- ;;
-globalscale,espressobin)
- ucidef_set_interfaces_lan_wan "lan0 lan1" "wan"
- ;;
-marvell,armada-3720-db)
- ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ;;
-marvell,armada8040-mcbin)
- ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2"
- ;;
-marvell,armada8040-db)
- ucidef_set_interfaces_lan_wan "eth0 eth2 eth3" "eth1"
- ;;
-marvell,armada7040-db)
- ucidef_set_interfaces_lan_wan "eth0 eth2" "eth1"
- ;;
*)
ucidef_set_interface_lan "eth0"
;;
diff --git a/target/linux/mvebu/base-files/etc/diag.sh b/target/linux/mvebu/base-files/etc/diag.sh
index 327a82df93..be825379f9 100644
--- a/target/linux/mvebu/base-files/etc/diag.sh
+++ b/target/linux/mvebu/base-files/etc/diag.sh
@@ -7,24 +7,24 @@
get_status_led() {
case $(board_name) in
- armada-385-linksys-caiman)
+ linksys,caiman)
status_led="caiman:white:power"
;;
- armada-385-linksys-cobra)
+ linksys,cobra)
status_led="cobra:white:power"
;;
- armada-385-linksys-rango)
+ linksys,mamba)
+ status_led="mamba:white:power"
+ ;;
+ linksys,rango)
status_led="rango:white:power"
;;
- armada-385-linksys-shelby)
+ linksys,shelby)
status_led="shelby:white:power"
;;
- armada-385-linksys-venom)
+ linksys,venom)
status_led="venom:blue:power"
;;
- armada-xp-linksys-mamba)
- status_led="mamba:white:power"
- ;;
esac
}
diff --git a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
index 520b8aac54..b4f375ec99 100755
--- a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
+++ b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
@@ -7,7 +7,7 @@ boot() {
. /lib/functions.sh
case $(board_name) in
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
+ linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom)
# make sure auto_recovery in uboot is always on
AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
diff --git a/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless b/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless
index 6fb24c8d4f..3c345ff148 100644
--- a/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless
+++ b/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless
@@ -11,7 +11,7 @@
board=$(board_name)
case "$board" in
-armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
+linksys,caiman|linksys,cobra|linksys,mamba|linksys,shelby|linksys,venom)
SKU=$(strings /dev/mtd3|sed -ne 's/^cert_region=//p')
WIFIMAC2G=$(macaddr_add $(cat /sys/class/net/eth0/address) +1)
WIFIMAC5G=$(macaddr_add $WIFIMAC2G +1)
@@ -34,7 +34,7 @@ armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|arm
esac
case "$board" in
- armada-xp-linksys-mamba)
+ linksys,mamba)
WIFIMAC0=$WIFIMAC2G
WIFIMAC1=$WIFIMAC5G
;;
diff --git a/target/linux/mvebu/base-files/etc/uci-defaults/04_mambafan b/target/linux/mvebu/base-files/etc/uci-defaults/04_mambafan
index e15ce616c7..ec25aedad6 100644
--- a/target/linux/mvebu/base-files/etc/uci-defaults/04_mambafan
+++ b/target/linux/mvebu/base-files/etc/uci-defaults/04_mambafan
@@ -8,7 +8,7 @@
board=$(board_name)
case "$board" in
-armada-xp-linksys-mamba)
+linksys,mamba)
# Set fan script execution in crontab
grep -s -q fan_ctrl.sh /etc/crontabs/root && exit 0
diff --git a/target/linux/mvebu/base-files/lib/mvebu.sh b/target/linux/mvebu/base-files/lib/mvebu.sh
deleted file mode 100755
index cfe880bb3c..0000000000
--- a/target/linux/mvebu/base-files/lib/mvebu.sh
+++ /dev/null
@@ -1,94 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2013-2015 OpenWrt.org
-# Copyright (C) 2016 LEDE-Project.org
-#
-
-MVEBU_BOARD_NAME=
-MVEBU_MODEL=
-
-mvebu_board_detect() {
- local machine
- local name
-
- machine=$(cat /proc/device-tree/model)
-
- case "$machine" in
- *"Marvell Armada 370 Evaluation Board")
- name="armada-370-db"
- ;;
- *"Globalscale Marvell ESPRESSOBin Board")
- name="globalscale,espressobin"
- ;;
- *"Marvell Armada 3720 Development Board DB-88F3720-DDR3")
- name="marvell,armada-3720-db"
- ;;
- *"Marvell 8040 MACCHIATOBin")
- name="marvell,armada8040-mcbin"
- ;;
- *"Marvell Armada 8040 DB board")
- name="marvell,armada8040-db"
- ;;
- *"Marvell Armada 7040 DB board")
- name="marvell,armada7040-db"
- ;;
- *"Globalscale Mirabox")
- name="mirabox"
- ;;
- *"Marvell Armada 370 Reference Design")
- name="armada-370-rd"
- ;;
- *"Marvell Armada XP Evaluation Board")
- name="armada-xp-db"
- ;;
- *"PlatHome OpenBlocks AX3-4 board")
- name="openblocks-ax3-4"
- ;;
- *"Marvell Armada XP GP Board")
- name="armada-xp-gp"
- ;;
- *"Linksys WRT1200AC")
- name="armada-385-linksys-caiman"
- ;;
- *"Linksys WRT1900AC")
- name="armada-xp-linksys-mamba"
- ;;
- *"Linksys WRT1900ACv2")
- name="armada-385-linksys-cobra"
- ;;
- *"Linksys WRT1900ACS")
- name="armada-385-linksys-shelby"
- ;;
- *"Linksys WRT3200ACM")
- name="armada-385-linksys-rango"
- ;;
- *"Linksys WRT32X")
- name="armada-385-linksys-venom"
- ;;
- *"Marvell Armada 385 Access Point Development Board")
- name="armada-385-db-ap"
- ;;
- *"Marvell Armada XP Development Board DB-MV784MP-GP")
- name="armada-xp-gp"
- ;;
- *"SolidRun Clearfog Pro A1")
- name="armada-388-clearfog-pro"
- ;;
- *"SolidRun Clearfog Base A1")
- name="armada-388-clearfog-base"
- ;;
- *"Turris Omnia")
- name="armada-385-turris-omnia"
- ;;
- esac
-
- [ -z "$name" ] && name="unknown"
-
- [ -z "$MVEBU_BOARD_NAME" ] && MVEBU_BOARD_NAME="$name"
- [ -z "$MVEBU_MODEL" ] && MVEBU_MODEL="$machine"
-
- [ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
-
- echo "$MVEBU_BOARD_NAME" > /tmp/sysinfo/board_name
- echo "$MVEBU_MODEL" > /tmp/sysinfo/model
-}
diff --git a/target/linux/mvebu/base-files/lib/preinit/01_sysinfo b/target/linux/mvebu/base-files/lib/preinit/01_sysinfo
deleted file mode 100644
index 6f473cfa13..0000000000
--- a/target/linux/mvebu/base-files/lib/preinit/01_sysinfo
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-do_sysinfo_mvebu() {
- . /lib/mvebu.sh
-
- mvebu_board_detect
-}
-
-boot_hook_add preinit_main do_sysinfo_mvebu
diff --git a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
index 534a271efb..aba8da239e 100644
--- a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
@@ -9,12 +9,7 @@ preinit_set_mac_address() {
. /lib/functions.sh
case $(board_name) in
- armada-xp-linksys-mamba)
- mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
- ip link set dev eth0 address $mac 2>/dev/null
- ip link set dev eth1 address $mac 2>/dev/null
- ;;
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom)
+ linksys,caiman|linksys,cobra|linksys,rango|linksys,shelby|linksys,venom)
# rename interfaces back to the way they were with 4.4
case "$(readlink /sys/class/net/eth0)" in
*f1070000*)
@@ -29,7 +24,12 @@ preinit_set_mac_address() {
ip link set dev eth1 address $mac 2>/dev/null
ip link set dev eth0 address $mac_wan 2>/dev/null
;;
- armada-385-db-ap|armada-388-clearfog)
+ linksys,mamba)
+ mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+ ip link set dev eth0 address $mac 2>/dev/null
+ ip link set dev eth1 address $mac 2>/dev/null
+ ;;
+ marvell,a385-db-ap|solidrun,clearfog*a1)
# rename interfaces back to the way they were with 4.4
case "$(readlink /sys/class/net/eth0)" in
*f1070000*)
diff --git a/target/linux/mvebu/base-files/lib/preinit/79_move_config b/target/linux/mvebu/base-files/lib/preinit/79_move_config
index f7e23cc324..640fb5cdad 100644
--- a/target/linux/mvebu/base-files/lib/preinit/79_move_config
+++ b/target/linux/mvebu/base-files/lib/preinit/79_move_config
@@ -9,7 +9,7 @@ move_config() {
if export_bootdevice && export_partdevice partdev 1; then
case $(board_name) in
- armada-385-turris-omnia)
+ cznic,turris-omnia)
insmod nls_cp437
insmod nls_iso8859-1
insmod fat
diff --git a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
index cf7a22c4f6..b107eacb11 100644
--- a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
+++ b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
@@ -8,7 +8,7 @@ preinit_mount_syscfg() {
. /lib/functions.sh
case $(board_name) in
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
+ linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom)
needs_recovery=0
syscfg_part=$(grep syscfg /proc/mtd |cut -c4)
ubiattach -m $syscfg_part || needs_recovery=1
diff --git a/target/linux/mvebu/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/base-files/lib/upgrade/platform.sh
index 57b2f00a4c..c3c31ea06f 100755
--- a/target/linux/mvebu/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mvebu/base-files/lib/upgrade/platform.sh
@@ -9,7 +9,7 @@ REQUIRE_IMAGE_METADATA=1
platform_check_image() {
case "$(board_name)" in
- armada-385-turris-omnia|armada-388-clearfog-base|armada-388-clearfog-pro|globalscale,espressobin|marvell,armada8040-mcbin)
+ cznic,turris-omnia|globalscale,espressobin|marvell,armada8040-mcbin|solidrun,clearfog-base-a1|solidrun,clearfog-pro-a1)
platform_check_image_sdcard "$ARGV"
;;
*)
@@ -20,10 +20,10 @@ platform_check_image() {
platform_do_upgrade() {
case "$(board_name)" in
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
+ linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom)
platform_do_upgrade_linksys "$ARGV"
;;
- armada-385-turris-omnia|armada-388-clearfog-base|armada-388-clearfog-pro|globalscale,espressobin|marvell,armada8040-mcbin)
+ cznic,turris-omnia|globalscale,espressobin|marvell,armada8040-mcbin|solidrun,clearfog-base-a1|solidrun,clearfog-pro-a1)
platform_do_upgrade_sdcard "$ARGV"
;;
*)
@@ -33,10 +33,10 @@ platform_do_upgrade() {
}
platform_copy_config() {
case "$(board_name)" in
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
+ linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom)
platform_copy_config_linksys
;;
- armada-385-turris-omnia|armada-388-clearfog-base|armada-388-clearfog-pro|globalscale,espressobin|marvell,armada8040-mcbin)
+ cznic,turris-omnia|globalscale,espressobin|marvell,armada8040-mcbin|solidrun,clearfog-base-a1|solidrun,clearfog-pro-a1)
platform_copy_config_sdcard "$ARGV"
;;
esac
diff --git a/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh b/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh
index 28fad31757..43fc2504fc 100644
--- a/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh
+++ b/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh
@@ -91,7 +91,7 @@ platform_do_upgrade_sdcard() {
get_image "$@" | dd of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync
case "$board" in
- armada-385-turris-omnia)
+ cznic,turris-omnia)
fw_setenv openwrt_bootargs 'earlyprintk console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=auto rootwait'
fw_setenv openwrt_mmcload 'setenv bootargs "$openwrt_bootargs cfg80211.freg=$regdomain"; fatload mmc 0 0x01000000 zImage; fatload mmc 0 0x02000000 armada-385-turris-omnia.dtb'
fw_setenv factory_mmcload 'setenv bootargs "$bootargs cfg80211.freg=$regdomain"; btrload mmc 0 0x01000000 boot/zImage @; btrload mmc 0 0x02000000 boot/dtb @'
diff --git a/target/linux/mvebu/image/Makefile b/target/linux/mvebu/image/Makefile
index f432a37911..57e5a30491 100644
--- a/target/linux/mvebu/image/Makefile
+++ b/target/linux/mvebu/image/Makefile
@@ -76,7 +76,7 @@ define Device/Default
IMAGES := sysupgrade.bin
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
- SUPPORTED_DEVICES = $$(firstword $$(DEVICE_DTS))
+ SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
UBINIZE_OPTS := -E 5
UBOOT :=
BOOT_SCRIPT :=
diff --git a/target/linux/mvebu/image/cortex-a53.mk b/target/linux/mvebu/image/cortex-a53.mk
index 5a3e9b4d07..de9c2164b1 100644
--- a/target/linux/mvebu/image/cortex-a53.mk
+++ b/target/linux/mvebu/image/cortex-a53.mk
@@ -4,7 +4,6 @@ define Device/globalscale_espressobin
$(call Device/Default-arm64)
DEVICE_TITLE := ESPRESSObin (Marvell Armada 3700 Community Board)
DEVICE_DTS := armada-3720-espressobin
- SUPPORTED_DEVICES := globalscale,espressobin
endef
TARGET_DEVICES += globalscale_espressobin
@@ -12,7 +11,6 @@ define Device/marvell_armada-3720-db
$(call Device/Default-arm64)
DEVICE_TITLE := Marvell Armada 3720 Development Board DB-88F3720-DDR3
DEVICE_DTS := armada-3720-db
- SUPPORTED_DEVICES := marvell,armada-3720-db
endef
TARGET_DEVICES += marvell_armada-3720-db
diff --git a/target/linux/mvebu/image/cortex-a72.mk b/target/linux/mvebu/image/cortex-a72.mk
index b1069b1f0b..73dc67b60a 100644
--- a/target/linux/mvebu/image/cortex-a72.mk
+++ b/target/linux/mvebu/image/cortex-a72.mk
@@ -14,7 +14,6 @@ define Device/marvell_armada8040-db
DEVICE_TITLE := Marvell Armada 8040 DB board
DEVICE_DTS := armada-8040-db
IMAGE/sdcard.img.gz := boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
- SUPPORTED_DEVICES := marvell,armada8040-db
endef
TARGET_DEVICES += marvell_armada8040-db
@@ -23,7 +22,6 @@ define Device/marvell_armada7040-db
DEVICE_TITLE := Marvell Armada 7040 DB board
DEVICE_DTS := armada-7040-db
IMAGE/sdcard.img.gz := boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
- SUPPORTED_DEVICES := marvell,armada7040-db
endef
TARGET_DEVICES += marvell_armada7040-db
diff --git a/target/linux/mvebu/image/cortex-a9.mk b/target/linux/mvebu/image/cortex-a9.mk
index baaeb8ddb6..401da3afaf 100644
--- a/target/linux/mvebu/image/cortex-a9.mk
+++ b/target/linux/mvebu/image/cortex-a9.mk
@@ -20,6 +20,7 @@ define Device/linksys_wrt1200ac
$(call Device/linksys,WRT1200AC (Caiman))
DEVICE_DTS := armada-385-linksys-caiman
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
+ SUPPORTED_DEVICES := armada-385-linksys-caiman linksys,caiman
endef
TARGET_DEVICES += linksys_wrt1200ac
@@ -27,6 +28,7 @@ define Device/linksys_wrt1900acv2
$(call Device/linksys,WRT1900ACv2 (Cobra))
DEVICE_DTS := armada-385-linksys-cobra
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
+ SUPPORTED_DEVICES := armada-385-linksys-cobra linksys,cobra
endef
TARGET_DEVICES += linksys_wrt1900acv2
@@ -34,6 +36,7 @@ define Device/linksys_wrt3200acm
$(call Device/linksys,WRT3200ACM (Rango))
DEVICE_DTS := armada-385-linksys-rango
DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964
+ SUPPORTED_DEVICES := armada-385-linksys-rango linksys,rango
endef
TARGET_DEVICES += linksys_wrt3200acm
@@ -41,6 +44,7 @@ define Device/linksys_wrt1900acs
$(call Device/linksys,WRT1900ACS (Shelby))
DEVICE_DTS := armada-385-linksys-shelby
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
+ SUPPORTED_DEVICES := armada-385-linksys-shelby linksys,shelby
endef
TARGET_DEVICES += linksys_wrt1900acs
@@ -50,6 +54,7 @@ define Device/linksys_wrt32x
DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964
KERNEL_SIZE := 3072k
KERNEL := kernel-bin | append-dtb
+ SUPPORTED_DEVICES := armada-385-linksys-venom linksys,venom
endef
TARGET_DEVICES += linksys_wrt32x
@@ -58,12 +63,13 @@ define Device/linksys_wrt1900ac
DEVICE_DTS := armada-xp-linksys-mamba
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
KERNEL_SIZE := 3072k
+ SUPPORTED_DEVICES := armada-xp-linksys-mamba linksys,mamba
endef
TARGET_DEVICES += linksys_wrt1900ac
define Device/plathome_openblocks-ax3-4
DEVICE_DTS := armada-xp-openblocks-ax3-4
- SUPPORTED_DEVICES := openblocks-ax3-4
+ SUPPORTED_DEVICES += openblocks-ax3-4
BLOCKSIZE := 128k
PAGESIZE := 1
IMAGES += factory.img
@@ -78,6 +84,7 @@ define Device/marvell_a385-db-ap
IMAGES += factory.img
KERNEL_SIZE := 8192k
DEVICE_TITLE := Marvell Armada 385 DB AP (DB-88F6820-AP)
+ SUPPORTED_DEVICES += armada-385-db-ap
endef
TARGET_DEVICES += marvell_a385-db-ap
@@ -85,6 +92,7 @@ define Device/marvell_a370-db
$(Device/NAND-512K)
DEVICE_TITLE := Marvell Armada 370 DB (DB-88F6710-BP-DDR3)
DEVICE_DTS := armada-370-db
+ SUPPORTED_DEVICES += armada-370-db
endef
TARGET_DEVICES += marvell_a370-db
@@ -92,6 +100,7 @@ define Device/marvell_a370-rd
$(Device/NAND-512K)
DEVICE_TITLE := Marvell Armada 370 RD (RD-88F6710-A1)
DEVICE_DTS := armada-370-rd
+ SUPPORTED_DEVICES += armada-370-rd
endef
TARGET_DEVICES += marvell_a370-rd
@@ -99,6 +108,7 @@ define Device/marvell_axp-db
$(Device/NAND-512K)
DEVICE_TITLE := Marvell Armada XP DB (DB-78460-BP)
DEVICE_DTS := armada-xp-db
+ SUPPORTED_DEVICES += armada-xp-db
endef
TARGET_DEVICES += marvell_axp-db
@@ -106,6 +116,7 @@ define Device/marvell_axp-gp
$(Device/NAND-512K)
DEVICE_TITLE := Marvell Armada XP GP (DB-MV784MP-GP)
DEVICE_DTS := armada-xp-gp
+ SUPPORTED_DEVICES += armada-xp-gp
endef
TARGET_DEVICES += marvell_axp-gp
@@ -114,6 +125,7 @@ define Device/marvell_a388-rd
DEVICE_DTS := armada-388-rd
IMAGES := firmware.bin
IMAGE/firmware.bin := append-kernel | pad-to 256k | append-rootfs | pad-rootfs
+ SUPPORTED_DEVICES := armada-388-rd marvell,a385-rd
endef
TARGET_DEVICES += marvell_a388-rd
@@ -125,7 +137,7 @@ define Device/solidrun_clearfog-pro-a1
IMAGES := sdcard.img.gz
IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
DEVICE_DTS := armada-388-clearfog-pro armada-388-clearfog-base
- SUPPORTED_DEVICES := armada-388-clearfog-pro armada-388-clearfog
+ SUPPORTED_DEVICES += armada-388-clearfog armada-388-clearfog-pro
UBOOT := clearfog-u-boot-spl.kwb
BOOT_SCRIPT := clearfog
endef
@@ -139,6 +151,7 @@ define Device/solidrun_clearfog-base-a1
IMAGES := sdcard.img.gz
IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
DEVICE_DTS := armada-388-clearfog-base armada-388-clearfog-pro
+ SUPPORTED_DEVICES += armada-388-clearfog-base
UBOOT := clearfog-u-boot-spl.kwb
BOOT_SCRIPT := clearfog
endef
@@ -147,7 +160,7 @@ TARGET_DEVICES += solidrun_clearfog-base-a1
define Device/globalscale_mirabox
$(Device/NAND-512K)
DEVICE_DTS := armada-370-mirabox
- SUPPORTED_DEVICES := mirabox
+ SUPPORTED_DEVICES += mirabox
DEVICE_TITLE := Globalscale Mirabox
endef
TARGET_DEVICES += globalscale_mirabox
@@ -166,6 +179,7 @@ define Device/cznic_turris-omnia
IMAGE/omnia-medkit-$$(IMAGE_PREFIX)-initramfs.tar.gz := omnia-medkit-initramfs | gzip
IMAGE_NAME = $$(2)
DEVICE_DTS := armada-385-turris-omnia
+ SUPPORTED_DEVICES += armada-385-turris-omnia
endef
TARGET_DEVICES += cznic_turris-omnia
--
2.21.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list