[OpenWrt-Devel] [PATCH v2 7/7] mvebu: espressobin: add u-boot environment

Tomasz Maciej Nowak tomek_n at o2.pl
Thu Mar 28 13:07:11 EDT 2019


This commit adds U-Boot environment defaults which extend the
bootloader to automatically boot the ESPRESSObin board from other
connected mediums i.e. SATA disk or USB disk.
The assigned boot probe order is as follows:
1. USB (usb0), 2. SATA (scsi0), 3. µSD (mmc0), 4. eMMC (mmc1).
U-Boot will iterate through them utill it'll find on one of devices the
uEnv.txt file. If not found, it'll fall back to loading using boot.scr
(loading from boot.scr is compatible only with U-Boot version 2017.03 or
later). There is also self update mechanism implemented which will
trigger if the variable 'owrt_uenv_ver' is changed.
This commit also adds compatibility with newer U-Boot versions in which
kernel_addr and fdt_addr environment variables changed names to
kernel_addr_r and fdt_addr_r.

The bootloader environment preparation needs to be done for every new
deployment and for every board with U-Boot 2015.01 version.
1. Connect/insert boot device with OpenWrt,
2. Power on the board and enter U-Boot command line,
3. Execute following commands:
    usb start
    scsi scan
    ext4load mmc 0:1 $loadaddr uEnv.txt || ext4load scsi 0:1 $loadaddr uEnv.txt || ext4load usb 0:1 $loadaddr uEnv.txt
    env import -t $loadaddr
    env delete $old_or_temp_vars
    saveenv
    reset
4. Now board should automatically find boot medium with OpenWrt
   installation and boot it.

Signed-off-by: Tomasz Maciej Nowak <tomek_n at o2.pl>
---
 target/linux/mvebu/image/Makefile             | 10 ++++++++
 target/linux/mvebu/image/cortex-a53.mk        |  2 +-
 .../image/globalscale-espressobin.bootscript  | 14 ++++++++---
 .../mvebu/image/globalscale-espressobin.uenv  | 25 +++++++++++++++++++
 4 files changed, 47 insertions(+), 4 deletions(-)
 create mode 100644 target/linux/mvebu/image/globalscale-espressobin.uenv

diff --git a/target/linux/mvebu/image/Makefile b/target/linux/mvebu/image/Makefile
index 88790777d9..126136dc6a 100644
--- a/target/linux/mvebu/image/Makefile
+++ b/target/linux/mvebu/image/Makefile
@@ -26,6 +26,15 @@ define Build/boot-scr
 	mkimage -A arm -O linux -T script -C none -a 0 -e 0 -d $@-new.bootscript $@-boot.scr
 endef
 
+define Build/uenv-txt
+	rm -f $@-uEnv.txt
+	sed \
+		-e 's#@ROOT@#$(SIGNATURE)#g' \
+		-e 's#@DTB@#$(DEVICE_DTS)#g' \
+		-e 's#@KERNEL@#$(KERNEL_NAME)#g' \
+		$(DEVICE_NAME).uenv > $@-uEnv.txt
+endef
+
 define Build/boot-img
 	rm -f $@.boot
 	mkfs.fat -C $@.boot $$(( $(CONFIG_TARGET_KERNEL_PARTSIZE) * 1024 ))
@@ -40,6 +49,7 @@ define Build/boot-img-ext4
 	$(foreach dts,$(DEVICE_DTS), $(CP) $(DTS_DIR)/$(dts).dtb $@.boot;)
 	$(CP) $(IMAGE_KERNEL) $@.boot/$(KERNEL_NAME)
 	-$(CP) $@-boot.scr $@.boot/boot.scr
+	-$(CP) $@-uEnv.txt $@.boot/uEnv.txt
 	make_ext4fs -J -l $(CONFIG_TARGET_KERNEL_PARTSIZE)M $@.bootimg $@.boot
 endef
 
diff --git a/target/linux/mvebu/image/cortex-a53.mk b/target/linux/mvebu/image/cortex-a53.mk
index dd6176100b..338c29c7f9 100644
--- a/target/linux/mvebu/image/cortex-a53.mk
+++ b/target/linux/mvebu/image/cortex-a53.mk
@@ -5,7 +5,7 @@ define Device/globalscale-espressobin
   KERNEL := kernel-bin
   DEVICE_TITLE := ESPRESSObin (Marvell Armada 3700 Community Board)
   IMAGES := sdcard.img.gz
-  IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+  IMAGE/sdcard.img.gz := uenv-txt | boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
   DEVICE_DTS := armada-3720-espressobin
   DTS_DIR := $(DTS_DIR)/marvell
   SUPPORTED_DEVICES := globalscale,espressobin
diff --git a/target/linux/mvebu/image/globalscale-espressobin.bootscript b/target/linux/mvebu/image/globalscale-espressobin.bootscript
index 0d03ac8513..d2a9653613 100644
--- a/target/linux/mvebu/image/globalscale-espressobin.bootscript
+++ b/target/linux/mvebu/image/globalscale-espressobin.bootscript
@@ -1,10 +1,18 @@
+if test -z "${owrt_uenv_ver}"; then
+	load mmc 0:1 ${loadaddr} uEnv.txt
+	env import -t ${loadaddr}
+	env delete ${old_or_temp_vars}
+	saveenv
+	boot
+fi
+
 setenv bootargs "root=PARTUUID=@ROOT at -02 rw rootwait"
 
 if test -n "${console}"; then
 	setenv bootargs "${bootargs} ${console}"
 fi
 
-load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb
-load mmc 0:1 ${kernel_addr} Image
+load mmc 0:1 ${fdt_addr}${fdt_addr_r} armada-3720-espressobin.dtb
+load mmc 0:1 ${kernel_addr}${kernel_addr_r} Image
 
-booti ${kernel_addr} - ${fdt_addr}
+booti ${kernel_addr}${kernel_addr_r} - ${fdt_addr}${fdt_addr_r}
diff --git a/target/linux/mvebu/image/globalscale-espressobin.uenv b/target/linux/mvebu/image/globalscale-espressobin.uenv
new file mode 100644
index 0000000000..986db9884b
--- /dev/null
+++ b/target/linux/mvebu/image/globalscale-espressobin.uenv
@@ -0,0 +1,25 @@
+owrt_uenv_ver=1
+old_or_temp_vars=devnum devtype fileaddr filesize root uenv_ver old_or_temp_vars
+boot_a_script=ext4load ${devtype} ${devnum}:${distro_bootpart} ${loadaddr} ${prefix}${script}; run set_owrt_uenv_ver; if test "${script}" = "uEnv.txt"; then env import -t ${loadaddr}; elif test "${script}" = "boot.scr"; then source ${loadaddr}; fi; run upg_owrt_uenv; run boot_owrt
+boot_owrt=setenv bootargs "${console} ${root} rw rootwait ${extra_params}"; ext4load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr}${fdt_addr_r} ${fdt_name}; ext4load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr}${kernel_addr_r} ${image_name}; booti ${kernel_addr}${kernel_addr_r} - ${fdt_addr}${fdt_addr_r}
+boot_prefixes=/ /boot/
+boot_scripts=uEnv.txt boot.scr
+boot_targets=usb0 scsi0 mmc0 mmc1
+bootcmd=run distro_bootcmd
+bootcmd_mmc0=setenv devnum 0; run mmc_boot
+bootcmd_mmc1=setenv devnum 1; run mmc_boot
+bootcmd_scsi0=setenv devnum 0; run scsi_boot
+bootcmd_usb0=setenv devnum 0; run usb_boot
+distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
+distro_bootpart=1
+extra_params=pci=pcie_bus_safe
+fdt_name=@DTB at .dtb
+image_name=@KERNEL@
+mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot; fi
+root=root=PARTUUID=@ROOT at -02
+scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_scripts; done;
+scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
+scsi_boot=scsi scan; if scsi dev ${devnum}; then setenv devtype scsi; run scan_dev_for_boot; fi
+set_owrt_uenv_ver=if test -n ${owrt_uenv_ver}; then setenv uenv_ver ${owrt_uenv_ver}; fi
+upg_owrt_uenv=if test ${uenv_ver} != ${owrt_uenv_ver}; then env delete ${old_or_temp_vars}; saveenv; echo U-Boot environment changed to version ${owrt_uenv_ver}; boot; fi
+usb_boot=usb start; if usb dev ${devnum}; then setenv devtype usb; run scan_dev_for_boot; fi
-- 
2.21.0


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list