[OpenWrt-Devel] [PATCH] ar71xx: add support for MikroTik RouterBOARD 922UAGS-5HPacD

Koen Vandeputte koen.vandeputte at ncentric.com
Mon Mar 25 11:54:43 EDT 2019


This patch adds support for the MikroTik RouterBOARD 922UAGS-5HPacD
with a built-in 802.11ac High-Power radio (31dBm).

See https://mikrotik.com/product/RB922UAGS-5HPacD for more info.

Specifications:
- SoC: Qualcomm Atheros QCA9557 (720 MHz)
- RAM: 128 MB
- Storage: 128 MB NAND
- Wireless: external QCA9882 802.11a/ac 2x2:2
- Ethernet: 1x 1000/100/10 Mbps, integrated, via AR8031 PHY, passive
PoE in
- SFP: 1x host
- USB: 1x 2.0 type A
- PCIe: 1x Mini slot (also contains USB 2.0 for 3G/LTE modems)
- SIM slot: 1x mini-SIM

Working:
- Board/system detection
- NAND storage detection
- PCIe
- USB
- Wireless
- Ethernet
- LED's (excl. SFP)
- Reset button
- Sysupgrade

Not working:
- Switching USB lanes towards Type-A slot (GPIO pin nr unknown)
- SFP cage

Notes:

The USB controller needs to be switched to either the Type-A slot, or
the PCIe socket. It's not possible to use both concurrently.
Selection can be done by toggling a GPIO.

By default, the USB is routed to the mini-PCIe slot.

Installation:

- Boot vmlinux-initramfs image via BOOTP/TFTP and then flash sysupgrade
image using "sysupgrade -n"

Signed-off-by: Koen Vandeputte <koen.vandeputte at ncentric.com>
---
 .../ar71xx/base-files/etc/board.d/02_network  |   1 +
 .../etc/hotplug.d/firmware/11-ath10k-caldata  |   1 +
 target/linux/ar71xx/base-files/lib/ar71xx.sh  |   3 +
 .../ar71xx/base-files/lib/upgrade/platform.sh |   2 +
 .../ar71xx/files/arch/mips/ath79/mach-rb922.c | 102 +++++++++++++-----
 target/linux/ar71xx/image/mikrotik.mk         |   2 +-
 6 files changed, 83 insertions(+), 28 deletions(-)

diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 0588e1b3c156..8dd2f6c6c039 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -107,6 +107,7 @@ ar71xx_setup_interfaces()
 	rb-912uag-2hpnd|\
 	rb-912uag-5hpnd|\
 	rb-921gs-5hpacd-r2|\
+	rb-922uags-5hpacd|\
 	rb-lhg-5nd|\
 	rb-mapl-2nd|\
 	rb-sxt2n|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index cd5c1c2bcb80..2ded261c8891 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -156,6 +156,7 @@ case "$FIRMWARE" in
 		;;
 	rb-911g-5hpacd|\
 	rb-921gs-5hpacd-r2|\
+	rb-922uags-5hpacd|\
 	rb-962uigs-5hact2hnt)
 		ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 166def960180..9a123b60e1ac 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -1089,6 +1089,9 @@ ar71xx_board_detect() {
 	*"RouterBOARD 921GS-5HPacD r2")
 		name="rb-921gs-5hpacd-r2"
 		;;
+	*"RouterBOARD 922UAGS-5HPacD")
+		name="rb-922uags-5hpacd"
+		;;
 	*"RouterBOARD 931-2nD")
 		name="rb-931-2nd"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index e970b6482d1b..e9227aaa7b77 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -557,6 +557,7 @@ platform_check_image() {
 	rb-912uag-2hpnd|\
 	rb-912uag-5hpnd|\
 	rb-921gs-5hpacd-r2|\
+	rb-922uags-5hpacd|\
 	rb-951g-2hnd|\
 	rb-951ui-2hnd|\
 	rb-2011l|\
@@ -878,6 +879,7 @@ platform_do_upgrade() {
 	rb-912uag-2hpnd|\
 	rb-912uag-5hpnd|\
 	rb-921gs-5hpacd-r2|\
+	rb-922uags-5hpacd|\
 	rb-951g-2hnd|\
 	rb-951ui-2hnd|\
 	rb-2011il|\
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c
index 43bcc99fc7cd..7895422bc972 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c
@@ -1,5 +1,5 @@
 /*
- *  MikroTik RouterBOARD 91X support
+ *  MikroTik RouterBOARD 92X support
  *
  *  Copyright (C) 2015 Gabor Juhos <juhosg at openwrt.org>
  *
@@ -49,6 +49,9 @@
 #define RB922_GPIO_BTN_RESET	20
 #define RB922_GPIO_NAND_NCE	23
 
+#define RB92X_FLAG_USB          BIT(0)
+#define RB92X_FLAG_PCIE         BIT(1)
+
 #define RB922_PHY_ADDR		4
 
 #define RB922_KEYS_POLL_INTERVAL	20	/* msecs */
@@ -62,6 +65,11 @@
 #define RB_SOFT_CFG_OFFSET	0xf000
 #define RB_SOFT_CFG_SIZE	0x1000
 
+struct rb_board_info {
+        const char *name;
+        u32 flags;
+};
+
 static struct mtd_partition rb922gs_spi_partitions[] = {
 	{
 		.name		= "routerboot",
@@ -82,6 +90,32 @@ static struct mtd_partition rb922gs_spi_partitions[] = {
 	}
 };
 
+static void __init rb922gs_init_partitions(const struct rb_info *info)
+{
+	rb922gs_spi_partitions[0].size = info->hard_cfg_offs;
+	rb922gs_spi_partitions[1].offset = info->hard_cfg_offs;
+	rb922gs_spi_partitions[3].offset = info->soft_cfg_offs;
+}
+
+static struct mtd_partition rb922gs_nand_partitions[] = {
+	{
+		.name	= "booter",
+		.offset	= 0,
+		.size	= (256 * 1024),
+		.mask_flags = MTD_WRITEABLE,
+	},
+	{
+		.name	= "kernel",
+		.offset	= (256 * 1024),
+		.size	= (4 * 1024 * 1024) - (256 * 1024),
+	},
+	{
+		.name	= "ubi",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
 static struct flash_platform_data rb922gs_spi_flash_data = {
 	.parts		= rb922gs_spi_partitions,
 	.nr_parts	= ARRAY_SIZE(rb922gs_spi_partitions),
@@ -118,12 +152,7 @@ static struct mdio_board_info rb922gs_mdio0_info[] = {
 	},
 };
 
-static void __init rb922gs_init_partitions(const struct rb_info *info)
-{
-	rb922gs_spi_partitions[0].size = info->hard_cfg_offs;
-	rb922gs_spi_partitions[1].offset = info->hard_cfg_offs;
-	rb922gs_spi_partitions[3].offset = info->soft_cfg_offs;
-}
+
 
 static void rb922gs_nand_select_chip(int chip_no)
 {
@@ -221,25 +250,6 @@ static int rb922gs_nand_scan_fixup(struct mtd_info *mtd)
 	return 0;
 }
 
-static struct mtd_partition rb922gs_nand_partitions[] = {
-	{
-		.name	= "booter",
-		.offset	= 0,
-		.size	= (256 * 1024),
-		.mask_flags = MTD_WRITEABLE,
-	},
-	{
-		.name	= "kernel",
-		.offset	= (256 * 1024),
-		.size	= (4 * 1024 * 1024) - (256 * 1024),
-	},
-	{
-		.name	= "ubi",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
 static void __init rb922gs_nand_init(void)
 {
 	gpio_request_one(RB922_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
@@ -252,10 +262,37 @@ static void __init rb922gs_nand_init(void)
 	ath79_register_nfc();
 }
 
+#define RB_BOARD_INFO(_name, _flags)    \
+        {                               \
+                .name = (_name),        \
+                .flags = (_flags),      \
+        }
+
+static const struct rb_board_info rb92x_boards[] __initconst = {
+        RB_BOARD_INFO("921GS-5HPacD r2", RB92X_FLAG_PCIE),
+        RB_BOARD_INFO("922UAGS-5HPacD", RB92X_FLAG_USB | RB92X_FLAG_PCIE),
+};
+
+static u32 rb92x_get_flags(const struct rb_info *info)
+{
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(rb92x_boards); i++) {
+                const struct rb_board_info *bi;
+
+                bi = &rb92x_boards[i];
+                if (strcmp(info->board_name, bi->name) == 0)
+                        return bi->flags;
+        }
+
+        return 0;
+}
+
 static void __init rb922gs_setup(void)
 {
 	const struct rb_info *info;
 	char buf[64];
+	u32 flags;
 
 	info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
 	if (!info)
@@ -281,7 +318,9 @@ static void __init rb922gs_setup(void)
 	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
 	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 	ath79_eth0_data.phy_mask = BIT(RB922_PHY_ADDR);
-	if (strcmp(info->board_name, "921GS-5HPacD r2") == 0) {
+	if (strcmp(info->board_name, "921GS-5HPacD r2") == 0 ||
+	    strcmp(info->board_name, "922UAGS-5HPacD") == 0)
+	{
 		ath79_eth0_pll_data.pll_10 = 0xa0001313;
 		ath79_eth0_pll_data.pll_100 = 0xa0000101;
 		ath79_eth0_pll_data.pll_1000 = 0x8f000000;
@@ -294,7 +333,16 @@ static void __init rb922gs_setup(void)
 
 	ath79_register_eth(0);
 
+	flags = rb92x_get_flags(info);
+
+        if (flags & RB92X_FLAG_USB)
+                ath79_register_usb();
+
+        if (flags & RB92X_FLAG_PCIE)
+                ath79_register_pci();
+
 	ath79_register_pci();
+	ath79_register_usb();
 	ath79_register_leds_gpio(-1, ARRAY_SIZE(rb922gs_leds), rb922gs_leds);
 	ath79_register_gpio_keys_polled(-1, RB922_KEYS_POLL_INTERVAL,
 					ARRAY_SIZE(rb922gs_gpio_keys),
diff --git a/target/linux/ar71xx/image/mikrotik.mk b/target/linux/ar71xx/image/mikrotik.mk
index 96dff4905fb2..23d348b6a981 100644
--- a/target/linux/ar71xx/image/mikrotik.mk
+++ b/target/linux/ar71xx/image/mikrotik.mk
@@ -36,7 +36,7 @@ define Device/nand-large-ac
   MIKROTIK_CHUNKSIZE := 2048
   DEVICE_TITLE := MikroTik RouterBoard (>= 128 MB NAND, 802.11ac)
   DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
-  SUPPORTED_DEVICES := rb-921gs-5hpacd-r2
+  SUPPORTED_DEVICES := rb-921gs-5hpacd-r2 rb-922uags-5hpacd
 endef
 TARGET_DEVICES += nand-large-ac
 
-- 
2.17.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list