[OpenWrt-Devel] [PATCH 1/2] mvebu: add kernel 4.19 support
Tomasz Maciej Nowak
tomek_n at o2.pl
Mon Jun 10 10:29:07 EDT 2019
W dniu 09.06.2019 o 09:29, Hauke Mehrtens pisze:
> On 6/5/19 4:31 PM, Tomasz Maciej Nowak wrote:
>> From: Marko Ratkaj <marko.ratkaj at sartura.hr>
>>
>> Cc: Vladimir Vid <vladimir.vid at sartura.hr>
>> Signed-off-by: Marko Ratkaj <marko.ratkaj at sartura.hr>
>> [added sfp related patches from Russell King]
>> Signed-off-by: Marek Behún <marek.behun at nic.cz>
>> [rebase; rework patches; separate and cleanup kernel configs;
>> add espessobin dts; adjust venom dts]
>> Signed-off-by: Tomasz Maciej Nowak <tomek_n at o2.pl>
>> ---
>> target/linux/mvebu/Makefile | 1 +
>> target/linux/mvebu/config-4.19 | 501 ++++++++++++
>> .../cortexa53/{config-default => config-4.14} | 0
>> target/linux/mvebu/cortexa53/config-4.19 | 114 +++
>> .../cortexa72/{config-default => config-4.14} | 0
>> target/linux/mvebu/cortexa72/config-4.19 | 122 +++
>> .../arm/boot/dts/armada-385-linksys-venom.dts | 213 +++++
>> .../marvell/armada-3720-espressobin-emmc.dts | 28 +
>> .../armada-3720-espressobin-v7-emmc.dts | 43 +
>> .../marvell/armada-3720-espressobin-v7.dts | 31 +
>> .../patches-4.19/002-add_powertables.patch | 770 ++++++++++++++++++
>> .../patches-4.19/003-add_switch_nodes.patch | 40 +
>> .../004-add_sata_disk_activity_trigger.patch | 39 +
>> ...5-linksys_hardcode_nand_ecc_settings.patch | 17 +
>> ...Mangle-bootloader-s-kernel-arguments.patch | 201 +++++
>> .../patches-4.19/100-find_active_root.patch | 60 ++
>> .../patches-4.19/102-revert_i2c_delay.patch | 15 +
>> .../205-armada-385-rd-mtd-partitions.patch | 19 +
>> .../206-ARM-mvebu-385-ap-Add-partitions.patch | 35 +
>> .../210-clearfog_switch_node.patch | 21 +
>> .../220-disable-untested-dsa-boards.patch | 30 +
>> ...-armada-xp-linksys-mamba-broken-idle.patch | 10 +
>> .../300-mvneta-tx-queue-workaround.patch | 35 +
>> ...dicate-failure-to-enter-deeper-sleep.patch | 40 +
>> ...-pci-mvebu-time-out-reset-on-link-up.patch | 60 ++
>> ...-call-mac_config-during-resolve-when.patch | 44 +
>> ...ink-ensure-inband-AN-works-correctly.patch | 59 ++
>> ...etdev-sfp_bus-and-use-for-start-stop.patch | 39 +
>> ...5-net-phy-marvell10g-add-SFP-support.patch | 155 ++++
>> .../406-sfp-add-sfp-compatible.patch | 24 +
>> ...7-sfp-display-SFP-module-information.patch | 297 +++++++
>> .../408-sfp-more-cotsworks-fixes.patch | 44 +
>> ...da388-clearfog-emmc-on-clearfog-base.patch | 87 ++
>> ...rmada388-clearfog-document-MPP-usage.patch | 124 +++
>> .../patches-4.19/450-reprobe_sfp_phy.patch | 94 +++
>> ...l-armada37xx-Add-emmc-sdio-pinctrl-d.patch | 40 +
>> ...l-armada-37xx-Enable-emmc-on-espress.patch | 49 ++
>> ...ts-marvell-armada37xx-Add-eth0-alias.patch | 20 +
>> ...da-3720-espressobin-correct-spi-node.patch | 58 ++
>> ...l-armada-3720-espressobin-add-ports-.patch | 26 +
>> ...rdvark-Convert-to-use-pci_host_probe.patch | 44 +
>> ...-device-to-the-same-MAX-payload-size.patch | 138 ++++
>> ...ardvark-disable-LOS-state-by-default.patch | 55 ++
>> ...ark-allow-to-specify-link-capability.patch | 43 +
>> ...-3720-espressobin-set-max-link-to-ge.patch | 73 ++
>> 45 files changed, 3958 insertions(+)
>> create mode 100644 target/linux/mvebu/config-4.19
>> rename target/linux/mvebu/cortexa53/{config-default => config-4.14} (100%)
>> create mode 100644 target/linux/mvebu/cortexa53/config-4.19
>> rename target/linux/mvebu/cortexa72/{config-default => config-4.14} (100%)
>> create mode 100644 target/linux/mvebu/cortexa72/config-4.19
>> create mode 100644 target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-385-linksys-venom.dts
>> create mode 100644 target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
>> create mode 100644 target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
>> create mode 100644 target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
>> create mode 100644 target/linux/mvebu/patches-4.19/002-add_powertables.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/003-add_switch_nodes.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/004-add_sata_disk_activity_trigger.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/005-linksys_hardcode_nand_ecc_settings.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/100-find_active_root.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/102-revert_i2c_delay.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/205-armada-385-rd-mtd-partitions.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/206-ARM-mvebu-385-ap-Add-partitions.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/210-clearfog_switch_node.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/220-disable-untested-dsa-boards.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/230-armada-xp-linksys-mamba-broken-idle.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/300-mvneta-tx-queue-workaround.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/401-pci-mvebu-time-out-reset-on-link-up.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/402-net-phylink-only-call-mac_config-during-resolve-when.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/403-net-phylink-ensure-inband-AN-works-correctly.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/405-net-phy-marvell10g-add-SFP-support.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/406-sfp-add-sfp-compatible.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/407-sfp-display-SFP-module-information.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/408-sfp-more-cotsworks-fixes.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/450-reprobe_sfp_phy.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/523-Revert-PCI-aardvark-Convert-to-use-pci_host_probe.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/526-PCI-aardvark-disable-LOS-state-by-default.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/527-PCI-aardvark-allow-to-specify-link-capability.patch
>> create mode 100644 target/linux/mvebu/patches-4.19/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch
>>
>> diff --git a/target/linux/mvebu/Makefile b/target/linux/mvebu/Makefile
>> index a920f6db7d..f39573c002 100644
>> --- a/target/linux/mvebu/Makefile
>> +++ b/target/linux/mvebu/Makefile
>> @@ -13,6 +13,7 @@ SUBTARGETS:=cortexa9 cortexa53 cortexa72
>> MAINTAINER:=Imre Kaloz <kaloz at openwrt.org>
>>
>> KERNEL_PATCHVER:=4.14
>> +KERNEL_TESTING_PATCHVER:=4.19
>>
>> include $(INCLUDE_DIR)/target.mk
>>
>> diff --git a/target/linux/mvebu/config-4.19 b/target/linux/mvebu/config-4.19
>> new file mode 100644
>> index 0000000000..2c996d4dcb
>> --- /dev/null
>> +++ b/target/linux/mvebu/config-4.19
>
> Please run "make target/linux/{clean,refresh} V=99" again to refresh
> this configuration some options are now in the generic configuration
> like CONFIG_MSCC_OCELOT_SWITCH.
Will do.
>
> ......
>
>
>> diff --git a/target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch b/target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch
>> new file mode 100644
>> index 0000000000..bd8f64dcbe
>> --- /dev/null
>> +++ b/target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch
>> @@ -0,0 +1,39 @@
>> +From 0068a89747e7c1d9a0bbb7282a34382a4274638a Mon Sep 17 00:00:00 2001
>> +From: Russell King <rmk+kernel at armlinux.org.uk>
>> +Date: Fri, 14 Apr 2017 16:41:55 +0100
>> +Subject: [PATCH] sfp: provide netdev sfp_bus and use for start/stop
>> +
>> +Add a netdev sfp_bus pointer for propagating the phylink start/stop
>> +actions to the SFP cage: the SFP cage may not be directly connected to
>> +phylink, but may be the other side of a fixed PHY, and SFP needs to
>> +know when the netdev is brought up or taken down.
>> +
>> +Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
>> +---
>> + drivers/net/phy/phylink.c | 8 ++++----
>> + 1 file changed, 4 insertions(+), 4 deletions(-)
>> +
>> +--- a/drivers/net/phy/phylink.c
>> ++++ b/drivers/net/phy/phylink.c
>> +@@ -943,8 +943,8 @@ void phylink_start(struct phylink *pl)
>> +
>> + if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
>> + mod_timer(&pl->link_poll, jiffies + HZ);
>> +- if (pl->sfp_bus)
>> +- sfp_upstream_start(pl->sfp_bus);
>> ++ if (pl->netdev->sfp_bus)
>> ++ sfp_upstream_start(pl->netdev->sfp_bus);
>> + if (pl->phydev)
>> + phy_start(pl->phydev);
>> + }
>> +@@ -965,8 +965,8 @@ void phylink_stop(struct phylink *pl)
>> +
>> + if (pl->phydev)
>> + phy_stop(pl->phydev);
>> +- if (pl->sfp_bus)
>> +- sfp_upstream_stop(pl->sfp_bus);
>> ++ if (pl->netdev->sfp_bus)
>> ++ sfp_upstream_stop(pl->netdev->sfp_bus);
>> + if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
>> + del_timer_sync(&pl->link_poll);
>> +
>
> Is this patch still needed?
>
> Shouldn't the SFP supported be integaretd into upstream now? I think the
> SFP related patches should be mostly backports or older versions of the
> upstream SFP support patches which wnet upstream.
>
>
Preferably, yes, it should be only backports. Patches with index number of 402-406
and 408 were added by Marek, maybe they are necessary to support some SFP modules.
That's something he would need to answer, because I don't have any hardware with SFP
port.
Regards
--
TMN
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list