[OpenWrt-Devel] [PATCH] mvebu: Replace backticks by $(...)

Adrian Schmutzler mail at adrianschmutzler.de
Wed Jul 24 13:48:53 EDT 2019


Hi,

> -----Original Message-----
> From: Rosen Penev [mailto:rosenp at gmail.com]
> Sent: Mittwoch, 24. Juli 2019 18:54
> To: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> Cc: OpenWrt Development List <openwrt-devel at lists.openwrt.org>
> Subject: Re: [OpenWrt-Devel] [PATCH] mvebu: Replace backticks by $(...)
> 
> On Wed, Jul 24, 2019 at 6:34 AM Adrian Schmutzler
> <freifunk at adrianschmutzler.de> wrote:
> >
> > Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> > ---
> >  target/linux/mvebu/base-files/lib/upgrade/linksys.sh | 2 +-
> >  target/linux/mvebu/base-files/sbin/fan_ctrl.sh       | 6 +++---
> >  2 files changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
> b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
> > index 3f45d6cac5..ddf24836bc 100644
> > --- a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
> > +++ b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
> > @@ -6,7 +6,7 @@ linksys_get_target_firmware() {
> >
> >         local cur_boot_part mtd_ubi0
> >
> > -       cur_boot_part=`/usr/sbin/fw_printenv -n boot_part`
> > +       cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part)
> >         if [ -z "${cur_boot_part}" ] ; then
> >                 mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
> >                 case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in
> egrep is deprecated as well. I'm assuming you're running these through
> shellcheck.

I indeed got this hint from shellcheck, suggesting "grep -E" as replacement.
However, I'm not familiar with the old egrep.
So, I was not sure whether I really can replace it without side-effects, and since I cannot test on this target, I decided against changing that.

If you tell me it's okay, I can include it in a v2.

Best

Adrian

> > diff --git a/target/linux/mvebu/base-files/sbin/fan_ctrl.sh
> b/target/linux/mvebu/base-files/sbin/fan_ctrl.sh
> > index 06e462119d..4234668317 100755
> > --- a/target/linux/mvebu/base-files/sbin/fan_ctrl.sh
> > +++ b/target/linux/mvebu/base-files/sbin/fan_ctrl.sh
> > @@ -1,8 +1,8 @@
> >  #!/bin/sh
> >
> > -CPU_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon2/temp1_input`
> > -DDR_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon1/temp1_input`
> > -WIFI_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon1/temp2_input`
> > +CPU_TEMP=$(cut -c1-2 /sys/class/hwmon/hwmon2/temp1_input)
> > +DDR_TEMP=$(cut -c1-2 /sys/class/hwmon/hwmon1/temp1_input)
> > +WIFI_TEMP=$(cut -c1-2 /sys/class/hwmon/hwmon1/temp2_input)
> >
> >  CPU_LOW=85
> >  CPU_HIGH=95
> > --
> > 2.20.1
> >
> >
> > _______________________________________________
> > openwrt-devel mailing list
> > openwrt-devel at lists.openwrt.org
> > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20190724/7fe18263/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list