[OpenWrt-Devel] [PATCH v3 1/6] ath79: Speed up caldata/eeprom handling

[Adrian Schmutzler]

Reading and writing to and from flash storage is slowed down
enormously by some functions which use a block size of 1.

This patch reworks the extraction scripts to be much faster and
efficient by reading and writing in possibly one big block.

This is based on the initial commit a69e101 for ipq40xx by
Christian Lamparter <chunkeey at gmail.com>.

Speed comparison @ UBNT AC-Mesh (just manually) results
in a time reduction by three orders of magnitude (99.9 %).

> time dd if=/dev/mtd6 of=/lib/firmware/test-slow bs=1 count=4096 skip=4096
4096+0 records in
4096+0 records out
real    0m 16.84s
user    0m 0.07s
sys     0m 13.54s

> time dd if=/dev/mtd6 of=/lib/firmware/test-fast bs=4096 count=1 skip=4096 iflag=skip_bytes
1+0 records in
1+0 records out
real    0m 0.02s
user    0m 0.00s
sys     0m 0.02s

Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>

---

Changed in v3:
- Rebased on the patch from Dmitry Tunin
- Changed position of iflag/oflag to be consistent with Dmitry

This depends on the patch "ath79: speed up ath9k-eeprom extraction"
from Dmitry Tunin.
---
 .../linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom   | 2 +-
 .../linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 84e4d07b35..d8b292f4da 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -81,7 +81,7 @@ ath9k_patch_fw_mac() {
 			dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
 	}
 
-	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$mac_offset count=6
+	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=$mac_offset count=1
 }
 
 ath9k_patch_fw_mac_crc() {
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index f4741fa3eb..a19c0c2478 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -28,7 +28,7 @@ ath10kcal_from_file() {
 	local offset=$2
 	local count=$3
 
-	dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+	dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
 		ath10kcal_die "failed to extract calibration data from $source"
 }
 
@@ -42,7 +42,7 @@ ath10kcal_extract() {
 	[ -n "$mtd" ] || \
 		ath10kcal_die "no mtd device found for partition $part"
 
-	dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+	dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
 		ath10kcal_die "failed to extract calibration data from $mtd"
 }
 
@@ -51,7 +51,7 @@ ath10kcal_patch_mac() {
 
 	[ -z "$mac" ] && return
 
-	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
+	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=6 count=1
 }
 
 ath10kcal_patch_mac_crc() {
-- 
2.11.0


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel