[OpenWrt-Devel] [PATCH] ar71xx: GL.iNet AR300M family: correct LED definitions

[Andreas Ziegler]

remove USB as this is no LED but power control
rename WiFi LED with correct color red (like in stock firmware)
set middle LED to be used for LAN link/activity

Signed-off-by: Andreas Ziegler <dev at andreas-ziegler.de>
---
 target/linux/ar71xx/base-files/etc/board.d/01_leds       | 1 +
 .../linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c  | 9 +--------
 2 files changed, 2 insertions(+), 8 deletions(-)

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 170adaa7a2..183495e57f 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -412,6 +412,7 @@ fritz450e)
 	;;
 gl-ar300m)
 	ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
+	ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
 	;;
 gl-ar750)
 	ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:white:wlan2g" "phy1tpt"
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
index 2a2d2702bc..d10a910129 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
@@ -29,7 +29,6 @@
 #include "machtypes.h"
 #include "pci.h"
 
-#define GL_AR300M_GPIO_LED_USB		2
 #define GL_AR300M_GPIO_LED_WLAN		14
 #define GL_AR300M_GPIO_LED_LAN		13
 #define GL_AR300M_GPIO_LED_SYSTEM	12
@@ -47,13 +46,7 @@
 
 static struct gpio_led gl_ar300m_leds_gpio[] __initdata = {
 	{
-		.name = "gl-ar300m:green:usb",
-		.gpio = GL_AR300M_GPIO_LED_USB,
-		.active_low = 0,
-		.default_state = 1,
-	},
-	{
-		.name = "gl-ar300m:green:wlan",
+		.name = "gl-ar300m:red:wlan",
 		.gpio = GL_AR300M_GPIO_LED_WLAN,
 		.active_low = 1,
 	},
-- 
2.20.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel