[OpenWrt-Devel] [PATCH 3/3] ipq40xx: add support for FritzBox 7530

[Christian Lamparter]

On Tuesday, February 12, 2019 8:55:37 PM CET David Bauer wrote:
> Hi Christian,
> On 11.02.19 23:15, Christian Lamparter wrote:
> > Comments inline.
> > 
> > On Sunday, February 10, 2019 2:34:30 PM CET David Bauer wrote:
> >> Hardware
> >> --------
> >> CPU:   Qualcomm IPQ4019
> >> RAM:   256M
> >> FLASH: 128M NAND
> >> ETH:   QCA8075
> >> VDSL:  Intel/Lantiq VRX518 PCIe attached
> >>        currently not supported
> > 
> > Does the pcie device show up during boot when
> > you add and enable the pcie nodes in the dts?
> > Or is more work required to get at least "lspci" working?
> 
> You will need to adjust the ranges of the PCIe bus, but nothing more is
> required to get the endpoint atleast detected. See here:
> 
> https://github.com/blocktrron/openwrt/commit/1766b385d6500abdd6a32c33007c47da62e2b757
> 
> Maybe we sould add this commented-out to the devicetree? I see no point
> in enabling the PCIe bus for a currently non-working device.

Man, this "just" (in QCOM time) got patched :-/.

(This went into 4.20):

<https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/arm/boot/dts/qcom-ipq4019.dtsi?id=da89f500cb55fb3f19c4b399b46d8add0abbd4d6>