[OpenWrt-Devel] [PATCH] ramips: add support for JCG JHR-AC876M
DENG Qingfang
dengqf6 at mail2.sysu.edu.cn
Fri Dec 13 11:24:19 EST 2019
JCG JHR-AC876M is an AC2600M router
Hardware specs:
SoC: MT7621AT
2.4GHz: MT7615N 4x4 @ PCIe0
5GHz: MT7615N 4x4 @ PCIe1
Flash: Winbond W25Q128JVSQ 16MiB
RAM: Nanya NT5CB128M16 256MiB
USB 2.0 and 3.0 ports
6 LEDs, 3 of which are connected to SoC GPIO
Reset and WPS buttons
Flash instructions:
Stock to OpenWrt:
Upload factory.bin in stock firmware's upgrade page,
do not preserve settings
OpenWrt to stock:
Push and hold the reset button for 5s while power cycling to
enter recovery mode;
Visit 192.168.1.1 and upload stock firmware
MAC addresses map:
0x0004 *:1c wlan2g/wan/label
0x8004 *:20 wlan5g
0xe000 *:1b lan
0xe006 *:1a not used in stock fw
Signed-off-by: DENG Qingfang <dengqf6 at mail2.sysu.edu.cn>
---
Changes since v2:
Flattened pinctrl node
Add MAC addresses map in commit message
Use kilobytes as JCG_MAXSIZE unit
---
.../ramips/dts/mt7621_jcg_jhr-ac876m.dts | 144 ++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 13 ++
.../mt7621/base-files/etc/board.d/02_network | 5 +
3 files changed, 162 insertions(+)
create mode 100644 target/linux/ramips/dts/mt7621_jcg_jhr-ac876m.dts
diff --git a/target/linux/ramips/dts/mt7621_jcg_jhr-ac876m.dts b/target/linux/ramips/dts/mt7621_jcg_jhr-ac876m.dts
new file mode 100644
index 0000000000..10766c0649
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_jcg_jhr-ac876m.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "jcg,jhr-ac876m", "mediatek,mt7621-soc";
+ model = "JCG JHR-AC876M";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb3 {
+ label = "jhr-ac876m:blue:usb3";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&xhci_ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb2 {
+ label = "jhr-ac876m:blue:usb2";
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ehci_port2>;
+ linux,default-trigger = "usbport";
+ };
+
+ led_wps: wps {
+ label = "jhr-ac876m:blue:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ ieee80211-freq-limit = <2400000 2500000>;
+
+ led {
+ led-active-low;
+ };
+ };
+};
+
+&pcie1 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+
+ led {
+ led-active-low;
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&state_default {
+ gpio {
+ ralink,group = "i2c", "uart3", "jtag", "wdt";
+ ralink,function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 0b2b74800a..6120ad8ec9 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -361,6 +361,19 @@ define Device/iodata_wnpr2600g
endef
TARGET_DEVICES += iodata_wnpr2600g
+define Device/jcg_jhr-ac876m
+ MTK_SOC := mt7621
+ IMAGE_SIZE := 16064k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := \
+ $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | jcg-header 89.1
+ JCG_MAXSIZE := 16064k
+ DEVICE_VENDOR := JCG
+ DEVICE_MODEL := JHR-AC876M
+ DEVICE_PACKAGES := kmod-mt7615e kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+endef
+TARGET_DEVICES += jcg_jhr-ac876m
+
define Device/lenovo_newifi-d1
MTK_SOC := mt7621
IMAGE_SIZE := 32448k
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index c9e3cbb984..ed2c5bb185 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -14,6 +14,7 @@ ramips_setup_interfaces()
d-team,pbr-m1|\
firefly,firewrt|\
hiwifi,hc5962|\
+ jcg,jhr-ac876m|\
mediatek,ap-mt7621a-v60|\
mediatek,mt7621-eval-board|\
mqmaker,witi|\
@@ -218,6 +219,10 @@ ramips_setup_macs()
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
label_mac=$wan_mac
;;
+ jcg,jhr-ac876m)
+ label_mac=$(mtd_get_mac_binary factory 0x4)
+ wan_mac=$label_mac
+ ;;
mediatek,ap-mt7621a-v60)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x5)" 1)
;;
--
2.24.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list