[OpenWrt-Devel] [PATCH 2/2] ramips: create common DTSI for TP-Link Archer C20i/C20 v1/C50 v1
Adrian Schmutzler
freifunk at adrianschmutzler.de
Sun Dec 8 10:34:55 EST 2019
The TP-Link Archer C20i/C20 v1/C50 v1 seem to be almost the same,
so creating a common DTSI will reduce duplicate code.
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
.../dts/mt7620a_tplink_archer-c20-v1.dts | 126 +-----------------
.../ramips/dts/mt7620a_tplink_archer-c20i.dts | 119 +----------------
.../dts/mt7620a_tplink_archer-c50-v1.dts | 126 +-----------------
.../ramips/dts/mt7620a_tplink_archer.dtsi | 124 +++++++++++++++++
4 files changed, 137 insertions(+), 358 deletions(-)
create mode 100644 target/linux/ramips/dts/mt7620a_tplink_archer.dtsi
diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c20-v1.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c20-v1.dts
index bc47f52d23..23719c3f35 100644
--- a/target/linux/ramips/dts/mt7620a_tplink_archer-c20-v1.dts
+++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c20-v1.dts
@@ -1,9 +1,6 @@
/dts-v1/;
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "mt7620a_tplink_archer.dtsi"
/ {
compatible = "tplink,archer-c20-v1", "ralink,mt7620a-soc";
@@ -16,10 +13,6 @@
led-upgrade = &led_power;
};
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
leds {
compatible = "gpio-leds";
@@ -66,86 +59,6 @@
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
};
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80 at 0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition at 20000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x20000 0x7a0000>;
- };
-
- partition at 7c0000 {
- label = "config";
- reg = <0x7c0000 0x10000>;
- read-only;
- };
-
- rom: partition at 7d0000 {
- label = "rom";
- reg = <0x7d0000 0x10000>;
- read-only;
- };
-
- partition at 7e0000 {
- label = "romfile";
- reg = <0x7e0000 0x10000>;
- read-only;
- };
-
- radio: partition at 7f0000 {
- label = "radio";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
};
&pinctrl {
@@ -157,42 +70,15 @@
};
};
-ðernet {
- pinctrl-names = "default";
- mtd-mac-address = <&rom 0xf100>;
- mediatek,portmap = "wllll";
- };
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
&wmac {
- ralink,mtd-eeprom = <&radio 0>;
- mtd-mac-address = <&rom 0xf100>;
- mtd-mac-address-increment = <(-2)>;
pinctrl-names = "default";
pinctrl-0 = <&pa_pins>;
-};
-&pcie {
- status = "okay";
+ mtd-mac-address = <&rom 0xf100>;
+ mtd-mac-address-increment = <(-2)>;
};
-&pcie0 {
- mt76 at 0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&radio 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- mtd-mac-address = <&rom 0xf100>;
- mtd-mac-address-increment = <(-1)>;
- };
+&wifi {
+ mtd-mac-address = <&rom 0xf100>;
+ mtd-mac-address-increment = <(-1)>;
};
diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts
index 5ee6d67192..975e0af661 100644
--- a/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts
+++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts
@@ -1,9 +1,6 @@
/dts-v1/;
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7620a_tplink_archer.dtsi"
/ {
compatible = "tplink,archer-c20i", "ralink,mt7620a-soc";
@@ -13,10 +10,6 @@
label-mac-device = ðernet;
};
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
leds {
compatible = "gpio-leds";
@@ -47,82 +40,6 @@
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
};
-
- keys {
- compatible = "gpio-keys";
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
-
- reset_wps {
- label = "reset_wps";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80 at 0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition at 20000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x20000 0x7a0000>;
- };
-
- partition at 7c0000 {
- label = "config";
- reg = <0x7c0000 0x10000>;
- };
-
- rom: partition at 7d0000 {
- label = "rom";
- reg = <0x7d0000 0x10000>;
- };
-
- partition at 7e0000 {
- label = "romfile";
- reg = <0x7e0000 0x10000>;
- };
-
- radio: partition at 7f0000 {
- label = "radio";
- reg = <0x7f0000 0x10000>;
- };
- };
- };
};
&pinctrl {
@@ -133,37 +50,3 @@
};
};
};
-
-ðernet {
- pinctrl-names = "default";
- mtd-mac-address = <&rom 0xf100>;
- mediatek,portmap = "wllll";
- };
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&radio 0x0>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76 at 0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&radio 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c50-v1.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c50-v1.dts
index e53e98e32b..77885853ef 100644
--- a/target/linux/ramips/dts/mt7620a_tplink_archer-c50-v1.dts
+++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c50-v1.dts
@@ -1,9 +1,6 @@
/dts-v1/;
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "mt7620a_tplink_archer.dtsi"
/ {
compatible = "tplink,archer-c50-v1", "ralink,mt7620a-soc";
@@ -16,10 +13,6 @@
led-upgrade = &led_power;
};
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
leds {
compatible = "gpio-leds";
@@ -66,86 +59,6 @@
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
};
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80 at 0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition at 20000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x20000 0x7a0000>;
- };
-
- partition at 7c0000 {
- label = "config";
- reg = <0x7c0000 0x10000>;
- read-only;
- };
-
- rom: partition at 7d0000 {
- label = "rom";
- reg = <0x7d0000 0x10000>;
- read-only;
- };
-
- partition at 7e0000 {
- label = "romfile";
- reg = <0x7e0000 0x10000>;
- read-only;
- };
-
- radio: partition at 7f0000 {
- label = "radio";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
};
&pinctrl {
@@ -157,42 +70,15 @@
};
};
-ðernet {
- pinctrl-names = "default";
- mtd-mac-address = <&rom 0xf100>;
- mediatek,portmap = "wllll";
- };
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
&wmac {
- ralink,mtd-eeprom = <&radio 0x0>;
- mtd-mac-address = <&rom 0xf100>;
- mtd-mac-address-increment = <(-2)>;
pinctrl-names = "default";
pinctrl-0 = <&pa_pins>;
-};
-&pcie {
- status = "okay";
+ mtd-mac-address = <&rom 0xf100>;
+ mtd-mac-address-increment = <(-2)>;
};
-&pcie0 {
- mt76 at 0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&radio 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- mtd-mac-address = <&rom 0xf100>;
- mtd-mac-address-increment = <(-1)>;
- };
+&wifi {
+ mtd-mac-address = <&rom 0xf100>;
+ mtd-mac-address-increment = <(-1)>;
};
diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer.dtsi b/target/linux/ramips/dts/mt7620a_tplink_archer.dtsi
new file mode 100644
index 0000000000..dd213ad219
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_tplink_archer.dtsi
@@ -0,0 +1,124 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80 at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition at 20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x20000 0x7a0000>;
+ };
+
+ partition at 7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x10000>;
+ read-only;
+ };
+
+ rom: partition at 7d0000 {
+ label = "rom";
+ reg = <0x7d0000 0x10000>;
+ read-only;
+ };
+
+ partition at 7e0000 {
+ label = "romfile";
+ reg = <0x7e0000 0x10000>;
+ read-only;
+ };
+
+ radio: partition at 7f0000 {
+ label = "radio";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ mtd-mac-address = <&rom 0xf100>;
+ mediatek,portmap = "wllll";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&radio 0x0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi: mt76 at 0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&radio 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
--
2.20.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list