[OpenWrt-Devel] [PATCH v6] ath79: add support of Netgear WNDR3800CH

Dmitry Tunin hanipouspilot at gmail.com
Wed Aug 7 16:07:33 EDT 2019


Add support for the ar71xx supported Netgear WNDR3800CH to ath79.
The device is identical to WNDR3800 except NETGEAR_BOARD_ID.

Signed-off-by: Dmitry Tunin <hanipouspilot at gmail.com>
---
 .../linux/ath79/base-files/etc/board.d/02_network  |  3 +-
 .../etc/hotplug.d/firmware/10-ath9k-eeprom         |  6 ++--
 .../linux/ath79/dts/ar7161_netgear_wndr3800ch.dts  | 36 ++++++++++++++++++++++
 target/linux/ath79/image/generic.mk                | 11 +++++++
 4 files changed, 53 insertions(+), 3 deletions(-)
 create mode 100644 target/linux/ath79/dts/ar7161_netgear_wndr3800ch.dts

diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 9c64299..dc3018d 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -177,7 +177,8 @@ ath79_setup_interfaces()
 		;;
 	netgear,wndr3700|\
 	netgear,wndr3700v2|\
-	netgear,wndr3800)
+	netgear,wndr3800|\
+	netgear,wndr3800ch)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
 			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u at eth0"
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index a7d4825..29da5c9 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -206,7 +206,8 @@ case "$FIRMWARE" in
 	buffalo,wzr-hp-ag300h|\
 	netgear,wndr3700|\
 	netgear,wndr3700v2|\
-	netgear,wndr3800)
+	netgear,wndr3800|\
+	netgear,wndr3800ch)
 		ath9k_eeprom_extract "art" 4096 3768
 		;;
 	dlink,dir-825-b1)
@@ -223,7 +224,8 @@ case "$FIRMWARE" in
 	buffalo,wzr-hp-ag300h|\
 	netgear,wndr3700|\
 	netgear,wndr3700v2|\
-	netgear,wndr3800)
+	netgear,wndr3800|\
+	netgear,wndr3800ch)
 		ath9k_eeprom_extract "art" 20480 3768
 		;;
 	dlink,dir-825-b1)
diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3800ch.dts b/target/linux/ath79/dts/ar7161_netgear_wndr3800ch.dts
new file mode 100644
index 0000000..84a859b
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_netgear_wndr3800ch.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7161_netgear_wndr3700.dtsi"
+
+/ {
+	compatible = "netgear,wndr3800ch", "qca,ar7161";
+	model = "Netgear WNDR3800CH";
+};
+
+&partitions {
+	partition at 0 {
+		label = "u-boot";
+		reg = <0x000000 0x050000>;
+		read-only;
+	};
+
+	partition at 50000 {
+		label = "u-boot-env";
+		reg = <0x050000 0x020000>;
+		read-only;
+	};
+
+	partition at 70000 {
+		label = "firmware";
+		reg = <0x070000 0xf80000>;
+		compatible = "netgear,uimage";
+	};
+
+	art: partition at ff0000 {
+		label = "art";
+		reg = <0xff0000 0x010000>;
+		read-only;
+	};
+};
+
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 8009582..538be46 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -789,6 +789,17 @@ define Device/netgear_wndr3800
 endef
 TARGET_DEVICES += netgear_wndr3800
 
+define Device/netgear_wndr3800ch
+  $(Device/netgear_wndr3x00)
+  DEVICE_MODEL := WNDR3800CH
+  NETGEAR_KERNEL_MAGIC := 0x33373031
+  NETGEAR_BOARD_ID := WNDR3800CH
+  NETGEAR_HW_ID := 29763654+16+128
+  IMAGE_SIZE := 15872k
+  SUPPORTED_DEVICES += wndr3800ch
+endef
+TARGET_DEVICES += netgear_wndr3800ch
+
 define Device/phicomm_k2t
   ATH_SOC := qca9563
   DEVICE_VENDOR := Phicomm
-- 
2.7.4


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list