[OpenWrt-Devel] [PATCH 2/2] treewide: convert WiFi caldata size and offset to hexadecimal
Adrian Schmutzler
freifunk at adrianschmutzler.de
Mon Aug 5 09:48:17 EDT 2019
This changes size and offset set for WiFi caldata extraction and
MAC address adjustment to hexadecimal notation.
This will be much clearer for the reader when numbers are big, and
will also match the style used for mtd-cal-data in DTS files.
Since dd cannot deal with hexadecimal notation, one has to convert
back to decimal by simple $(($hexnum)).
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
.../etc/hotplug.d/firmware/10-ath9k-eeprom | 22 +++---
.../etc/hotplug.d/firmware/10-ath9k-eeprom | 46 ++++++------
.../etc/hotplug.d/firmware/11-ath10k-caldata | 56 +++++++-------
.../etc/hotplug.d/firmware/10-ath9k-eeprom | 74 +++++++++----------
.../etc/hotplug.d/firmware/11-ath10k-caldata | 56 +++++++-------
.../etc/hotplug.d/firmware/10-rt2x00-eeprom | 8 +-
.../etc/hotplug.d/firmware/11-ath10k-caldata | 58 +++++++--------
.../etc/hotplug.d/firmware/11-ath10k-caldata | 36 ++++-----
.../etc/hotplug.d/firmware/12-ath9k-eeprom | 34 ++++-----
.../etc/hotplug.d/firmware/10-ath9k-eeprom | 8 +-
.../etc/hotplug.d/firmware/10-rt2x00-eeprom | 6 +-
11 files changed, 202 insertions(+), 202 deletions(-)
diff --git a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index b3b8886720..272c084c99 100644
--- a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -12,8 +12,8 @@ ath9k_eeprom_die() {
ath9k_eeprom_extract() {
local part=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
local mtd
mtd=$(find_mtd_chardev $part)
@@ -26,8 +26,8 @@ ath9k_eeprom_extract() {
ath9k_ubi_eeprom_extract() {
local part=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
local ubidev=$(nand_find_ubi $CI_UBIPART)
local ubi
@@ -40,11 +40,11 @@ ath9k_ubi_eeprom_extract() {
}
ath9k_patch_firmware_mac() {
- local mac=$1
+ local mac=$1
- [ -z "$mac" ] && return
+ [ -z "$mac" ] && return
- macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=2 count=6
+ macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=2 count=6
}
board=$(board_name)
@@ -56,9 +56,9 @@ case "$FIRMWARE" in
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 20480 4096
+ ath9k_ubi_eeprom_extract "caldata" 0x5000 0x1000
else
- ath9k_eeprom_extract "wifi_data" 20480 4096
+ ath9k_eeprom_extract "wifi_data" 0x5000 0x1000
ath9k_patch_firmware_mac $(mtd_get_mac_binary wifi_data 0xc)
fi
;;
@@ -74,9 +74,9 @@ case "$FIRMWARE" in
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 4096 4096
+ ath9k_ubi_eeprom_extract "caldata" 0x1000 0x1000
else
- ath9k_eeprom_extract "wifi_data" 4096 4096
+ ath9k_eeprom_extract "wifi_data" 0x1000 0x1000
ath9k_patch_firmware_mac $(mtd_get_mac_binary wifi_data 0x0)
fi
;;
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 3924202d8e..8fe57c87cc 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -12,8 +12,8 @@ ath9k_eeprom_die() {
ath9k_eeprom_extract() {
local part=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
local mtd
mtd=$(find_mtd_chardev $part)
@@ -26,8 +26,8 @@ ath9k_eeprom_extract() {
ath9k_ubi_eeprom_extract() {
local part=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
local ubidev=$(nand_find_ubi $CI_UBIPART)
local ubi
@@ -42,7 +42,7 @@ ath9k_ubi_eeprom_extract() {
ath9k_eeprom_extract_reverse() {
local part=$1
local offset=$2
- local count=$3
+ local count=$(($3))
local mtd
local reversed
local caldata
@@ -72,43 +72,43 @@ case "$FIRMWARE" in
case $board in
c-55|\
c-60)
- ath9k_eeprom_extract "art" 4096 2048
+ ath9k_eeprom_extract "art" 0x1000 0x800
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
;;
fritz4020|\
fritz450e)
- ath9k_eeprom_extract_reverse "urlader" 5441 1088
+ ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440
;;
mr18)
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 4096 2048
+ ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800
else
- ath9k_eeprom_extract "odm-caldata" 4096 2048
+ ath9k_eeprom_extract "odm-caldata" 0x1000 0x800
fi
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +1)
;;
r6100 | \
wndr3700v4 | \
wndr4300)
- ath9k_eeprom_extract "caldata" 4096 2048
+ ath9k_eeprom_extract "caldata" 0x1000 0x800
ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0x0)
;;
rambutan)
- ath9k_eeprom_extract "art" 4096 2048
+ ath9k_eeprom_extract "art" 0x1000 0x800
;;
wlr8100)
- ath9k_eeprom_extract "art" 4096 2048
+ ath9k_eeprom_extract "art" 0x1000 0x800
ath9k_patch_firmware_mac $(mtd_get_mac_ascii u-boot-env "ethaddr")
;;
z1)
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 4096 2048
+ ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800
else
- ath9k_eeprom_extract "origcaldata" 4096 2048
+ ath9k_eeprom_extract "origcaldata" 0x1000 0x800
fi
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2)
;;
@@ -121,34 +121,34 @@ case "$FIRMWARE" in
"pci_wmac0.eeprom")
case $board in
c-55)
- ath9k_eeprom_extract "art" 20480 2048
+ ath9k_eeprom_extract "art" 0x5000 0x800
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
;;
fritz300e)
- ath9k_eeprom_extract_reverse "urloader" 5441 1088
+ ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440
;;
mr18)
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 20480 2048
+ ath9k_ubi_eeprom_extract "caldata" 0x5000 0x800
else
- ath9k_eeprom_extract "odm-caldata" 20480 2048
+ ath9k_eeprom_extract "odm-caldata" 0x5000 0x800
fi
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2)
;;
wndr3700v4 | \
wndr4300)
- ath9k_eeprom_extract "caldata" 20480 2048
+ ath9k_eeprom_extract "caldata" 0x5000 0x800
ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0xc)
;;
z1)
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 86016 4096
+ ath9k_ubi_eeprom_extract "caldata" 0x15000 0x1000
else
- ath9k_eeprom_extract "origcaldata" 86016 4096
+ ath9k_eeprom_extract "origcaldata" 0x15000 0x1000
fi
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3)
;;
@@ -164,9 +164,9 @@ case "$FIRMWARE" in
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 36864 2048
+ ath9k_ubi_eeprom_extract "caldata" 0x9000 0x800
else
- ath9k_eeprom_extract "odm-caldata" 36864 2048
+ ath9k_eeprom_extract "odm-caldata" 0x9000 0x800
fi
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3)
;;
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index a3d4770b32..2ba8de4783 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -7,8 +7,8 @@ ath10kcal_die() {
ath10kcal_from_file() {
local source=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
ath10kcal_die "failed to extract calibration data from $source"
@@ -16,8 +16,8 @@ ath10kcal_from_file() {
ath10kcal_extract() {
local part=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
local mtd cal_size
mtd=$(find_mtd_chardev $part)
@@ -57,17 +57,17 @@ case "$FIRMWARE" in
mr1750|\
mr1750v2|\
om5p-acv2)
- ath10kcal_extract "ART" 20480 2116
+ ath10kcal_extract "ART" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
archer-c25-v1|\
tl-wdr6500-v2)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
;;
archer-c7-v4|\
archer-c7-v5)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
;;
cf-e355ac-v1|\
@@ -81,60 +81,60 @@ case "$FIRMWARE" in
oolite-v5.2-dev|\
sr3200|\
xd3200)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
;;
dap-2695-a1)
- ath10kcal_extract "radiocfg" 20480 2116
+ ath10kcal_extract "radiocfg" 0x5000 0x844
ath10kcal_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
;;
dir-869-a1|\
qihoo-c301)
- ath10kcal_extract "radiocfg" 20480 2116
+ ath10kcal_extract "radiocfg" 0x5000 0x844
ath10kcal_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
;;
dw33d)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(mtd_get_mac_binary art 0x12)
;;
epg5000|\
esr1750)
- ath10kcal_extract "caldata" 20480 2116
+ ath10kcal_extract "caldata" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
gl-ar750s|\
gl-ar750|\
tl-wpa8630)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
koala)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0xc) +0)
;;
mc-mac1200r)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
;;
r6100)
- ath10kcal_extract "caldata" 20480 2116
+ ath10kcal_extract "caldata" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) +2)
;;
rb-952ui-5ac2nd|\
rb-wapg-5hact2hnd)
- ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116
+ ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 0x5000 0x844
;;
re355|\
re450|\
tl-wr902ac-v1)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
unifiac-lite|\
unifiac-pro)
- ath10kcal_extract "EEPROM" 20480 2116
+ ath10kcal_extract "EEPROM" 0x5000 0x844
;;
wi2a-ac200i)
- ath10kcal_extract "ART" 20480 2116
+ ath10kcal_extract "ART" 0x5000 0x844
;;
esac
;;
@@ -142,26 +142,26 @@ case "$FIRMWARE" in
case $board in
archer-c5|\
archer-c7)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
;;
nbg6616|\
nbg6716)
- ath10kcal_extract "RFdata" 20480 2116
+ ath10kcal_extract "RFdata" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
;;
om5p-ac)
- ath10kcal_extract "ART" 20480 2116
+ ath10kcal_extract "ART" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
rb-911g-5hpacd|\
rb-921gs-5hpacd-r2|\
rb-922uags-5hpacd|\
rb-962uigs-5hact2hnt)
- ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116
+ ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 0x5000 0x844
;;
wlr8100)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
;;
esac
@@ -174,18 +174,18 @@ case "$FIRMWARE" in
archer-c60-v1|\
cf-e355ac-v2|\
cf-e375ac)
- ath10kcal_extract "art" 20480 12064
+ ath10kcal_extract "art" 0x5000 0x2f20
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
archer-c60-v2)
- ath10kcal_extract "art" 20480 12064
+ ath10kcal_extract "art" 0x5000 0x2f20
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
;;
cf-e385ac)
- ath10kcal_extract "art" 20480 12064
+ ath10kcal_extract "art" 0x5000 0x2f20
;;
esac
;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index caeefd251f..f6936270d6 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -12,8 +12,8 @@ ath9k_eeprom_die() {
ath9k_eeprom_extract() {
local part=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
local mtd
mtd=$(find_mtd_chardev $part)
@@ -27,7 +27,7 @@ ath9k_eeprom_extract() {
ath9k_eeprom_extract_reverse() {
local part=$1
local offset=$2
- local count=$3
+ local count=$(($3))
local mtd
local reversed
local caldata
@@ -59,8 +59,8 @@ xor() {
ath9k_patch_fw_mac() {
local mac=$1
- local mac_offset=$2
- local chksum_offset=$3
+ local mac_offset=$(($2))
+ local chksum_offset=$(($3))
local xor_mac
local xor_fw_mac
local xor_fw_chksum
@@ -98,40 +98,40 @@ case "$FIRMWARE" in
"ath9k-eeprom-ahb-18100000.wmac.bin")
case $board in
avm,fritz4020)
- ath9k_eeprom_extract_reverse "urlader" 5441 1088
+ ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440
;;
dlink,dir-825-c1|\
dlink,dir-835-a1)
- ath9k_eeprom_extract "art" 4096 1088
- ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 0x4) 2
+ ath9k_eeprom_extract "art" 0x1000 0x440
+ ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 0x4) 0x2
;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-859-a1|\
nec,wg1200cr|\
wd,mynet-n750)
- ath9k_eeprom_extract "art" 4096 1088
- ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2
+ ath9k_eeprom_extract "art" 0x1000 0x440
+ ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2
;;
engenius,ecb1750)
- ath9k_eeprom_extract "art" 4096 1088
- ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 2
+ ath9k_eeprom_extract "art" 0x1000 0x440
+ ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 0x2
;;
engenius,epg5000|\
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr|\
iodata,wn-ac1600dgr2|\
iodata,wn-ag300dgr)
- ath9k_eeprom_extract "art" 4096 1088
- ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 2
+ ath9k_eeprom_extract "art" 0x1000 0x440
+ ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 0x2
;;
nec,wg800hp)
- ath9k_eeprom_extract "art" 4096 1088
- ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 2
+ ath9k_eeprom_extract "art" 0x1000 0x440
+ ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 0x2
;;
qihoo,c301)
- ath9k_eeprom_extract "radiocfg" 4096 1088
- ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2
+ ath9k_eeprom_extract "radiocfg" 0x1000 0x440
+ ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2
;;
*)
ath9k_eeprom_die "board $board is not supported yet"
@@ -141,28 +141,28 @@ case "$FIRMWARE" in
"ath9k-eeprom-pci-0000:00:00.0.bin")
case $board in
avm,fritz300e)
- ath9k_eeprom_extract_reverse "urloader" 5441 1088
+ ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440
;;
buffalo,whr-g301n|\
buffalo,wzr-hp-g302h-a1a0|\
tplink,tl-wr841-v5|\
tplink,tl-wr941-v4)
- ath9k_eeprom_extract "art" 4096 3768
+ ath9k_eeprom_extract "art" 0x1000 0xeb8
;;
buffalo,wzr-hp-g450h)
- ath9k_eeprom_extract "art" 4096 1088
+ ath9k_eeprom_extract "art" 0x1000 0x440
;;
dlink,dir-825-c1|\
dlink,dir-835-a1)
- ath9k_eeprom_extract "art" 20480 1088
- ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 2
+ ath9k_eeprom_extract "art" 0x5000 0x440
+ ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 0x2
;;
ocedo,raccoon|\
tplink,tl-wdr3600-v1|\
tplink,tl-wdr4300-v1|\
tplink,tl-wdr4900-v2|\
winchannel,wb2000)
- ath9k_eeprom_extract "art" 20480 1088
+ ath9k_eeprom_extract "art" 0x5000 0x440
;;
netgear,wnr612-v2|\
on,n150r|\
@@ -180,21 +180,21 @@ case "$FIRMWARE" in
ubnt,bullet-m|\
ubnt,nano-m|\
ubnt,rocket-m)
- ath9k_eeprom_extract "art" 4096 4096
+ ath9k_eeprom_extract "art" 0x1000 0x1000
;;
pqi,air-pen)
- ath9k_eeprom_extract "art" 4096 2002
+ ath9k_eeprom_extract "art" 0x1000 0x7d2
;;
ubnt,unifi)
- ath9k_eeprom_extract "art" 4096 2048
+ ath9k_eeprom_extract "art" 0x1000 0x800
;;
wd,mynet-n750)
- ath9k_eeprom_extract "art" 20480 1088
- ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 2
+ ath9k_eeprom_extract "art" 0x5000 0x440
+ ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 0x2
;;
wd,mynet-wifi-rangeextender)
- ath9k_eeprom_extract "art" 4096 4096
- ath9k_patch_fw_mac_crc $(nvram get wl0_hwaddr) "$mac" 2
+ ath9k_eeprom_extract "art" 0x1000 0x1000
+ ath9k_patch_fw_mac_crc $(nvram get wl0_hwaddr) "$mac" 0x2
;;
*)
ath9k_eeprom_die "board $board is not supported yet"
@@ -207,11 +207,11 @@ case "$FIRMWARE" in
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)
- ath9k_eeprom_extract "art" 4096 3768
+ ath9k_eeprom_extract "art" 0x1000 0xeb8
;;
dlink,dir-825-b1)
- ath9k_eeprom_extract "caldata" 4096 3768
- ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 524
+ ath9k_eeprom_extract "caldata" 0x1000 0xeb8
+ ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c
;;
*)
ath9k_eeprom_die "board $board is not supported yet"
@@ -224,11 +224,11 @@ case "$FIRMWARE" in
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)
- ath9k_eeprom_extract "art" 20480 3768
+ ath9k_eeprom_extract "art" 0x5000 0xeb8
;;
dlink,dir-825-b1)
- ath9k_eeprom_extract "caldata" 20480 3768
- ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 524
+ ath9k_eeprom_extract "caldata" 0x5000 0xeb8
+ ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c
;;
*)
ath9k_eeprom_die "board $board is not supported yet"
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 91a355c5c9..8f9e51902a 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -25,8 +25,8 @@ ath10kcal_die() {
ath10kcal_from_file() {
local source=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
ath10kcal_die "failed to extract calibration data from $source"
@@ -34,8 +34,8 @@ ath10kcal_from_file() {
ath10kcal_extract() {
local part=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
local mtd
mtd=$(find_mtd_chardev $part)
@@ -93,53 +93,53 @@ case "$FIRMWARE" in
devolo,dvl1750e|\
devolo,dvl1750i|\
devolo,dvl1750x)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
;;
dlink,dir-859-a1)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
;;
elecom,wrc-1750ghbk2-i)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
;;
engenius,ecb1750)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
;;
engenius,epg5000|\
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
;;
engenius,ews511ap)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
glinet,gl-ar750s)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
;;
glinet,gl-x750)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
;;
nec,wg800hp)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 0x880)
;;
ocedo,koala|\
ocedo,ursus)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(mtd_get_mac_binary art 0xc)
;;
openmesh,om5p-ac-v2)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
qihoo,c301)
- ath10kcal_extract "radiocfg" 20480 2116
+ ath10kcal_extract "radiocfg" 0x5000 0x844
ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac)
;;
tplink,archer-a7-v5|\
@@ -147,29 +147,29 @@ case "$FIRMWARE" in
tplink,archer-c7-v4|\
tplink,archer-c7-v5|\
tplink,archer-c25-v1)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
;;
tplink,archer-c5-v1|\
tplink,archer-c7-v2)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
;;
tplink,archer-d50-v1)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
;;
tplink,re350k-v1)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
;;
tplink,re355-v1|\
tplink,re450-v1)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
tplink,re450-v2)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
;;
ubnt,unifiac-lite|\
@@ -180,10 +180,10 @@ case "$FIRMWARE" in
ubnt,nanostation-ac|\
ubnt,nanostation-ac-loco|\
ubnt,unifiac-pro)
- ath10kcal_extract "EEPROM" 20480 2116
+ ath10kcal_extract "EEPROM" 0x5000 0x844
;;
yuncore,a770)
- ath10kcal_extract "art" 20480 2116
+ ath10kcal_extract "art" 0x5000 0x844
;;
esac
;;
@@ -192,18 +192,18 @@ case "$FIRMWARE" in
dlink,dir-842-c1|\
dlink,dir-842-c2|\
nec,wg1200cr)
- ath10kcal_extract "art" 20480 12064
+ ath10kcal_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
netgear,ex6400|\
netgear,ex7300)
- ath10kcal_extract "caldata" 20480 12064
+ ath10kcal_extract "caldata" 0x5000 0x2f20
ath10kcal_patch_mac $(mtd_get_mac_binary caldata 0xc)
;;
phicomm,k2t)
- ath10kcal_extract "art" 20480 12064
+ ath10kcal_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac")
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
@@ -213,7 +213,7 @@ case "$FIRMWARE" in
tplink,archer-c60-v1|\
tplink,archer-c60-v2|\
tplink,archer-c6-v2)
- ath10kcal_extract "art" 20480 12064
+ ath10kcal_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
diff --git a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index fe31ed323d..305d5feda5 100644
--- a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -8,8 +8,8 @@ rt2x00_eeprom_die() {
rt2x00_eeprom_extract() {
local part=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
local mtd
mtd=$(find_mtd_part $part)
@@ -30,11 +30,11 @@ case "$FIRMWARE" in
"rt2x00.eeprom" )
case $board in
hg556a_c)
- rt2x00_eeprom_extract "cal_data" 130560 512
+ rt2x00_eeprom_extract "cal_data" 0x1fe00 0x200
;;
hg622 |\
hg655b)
- rt2x00_eeprom_extract "cal_data" 0 512
+ rt2x00_eeprom_extract "cal_data" 0x0 0x200
;;
*)
rt2x00_eeprom_die "board $board is not supported yet"
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index a09678ca95..456017e30b 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -23,8 +23,8 @@ ath10kcal_die() {
ath10kcal_extract() {
local part=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
local mtd
mtd=$(find_mtd_chardev $part)
@@ -37,8 +37,8 @@ ath10kcal_extract() {
ath10kcal_ubi_extract() {
local part=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
local ubidev
local ubi
@@ -97,8 +97,8 @@ case "$FIRMWARE" in
"ath10k/cal-pci-0000:01:00.0.bin")
case "$board" in
meraki,mr33)
- ath10kcal_ubi_extract "ART" 36864 2116
- ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 36864 2116
+ ath10kcal_ubi_extract "ART" 0x9000 0x844
+ ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 0x9000 0x844
ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
;;
esac
@@ -106,7 +106,7 @@ case "$FIRMWARE" in
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case "$board" in
asus,map-ac2200)
- ath10kcal_ubi_extract "Factory" 36864 12064
+ ath10kcal_ubi_extract "Factory" 0x9000 0x2f20
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
@@ -115,12 +115,12 @@ case "$FIRMWARE" in
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
;;
linksys,ea8300)
- ath10kcal_extract "ART" 36864 12064
+ ath10kcal_extract "ART" 0x9000 0x2f20
# OEM assigns 4 sequential MACs
ath10kcal_patch_mac_crc $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
;;
openmesh,a62)
- ath10kcal_extract "0:ART" 36864 12064
+ ath10kcal_extract "0:ART" 0x9000 0x2f20
;;
esac
;;
@@ -131,14 +131,14 @@ case "$FIRMWARE" in
glinet,gl-b1300 |\
linksys,ea6350v3 |\
qcom,ap-dk01.1-c1)
- ath10kcal_extract "ART" 4096 12064
+ ath10kcal_extract "ART" 0x1000 0x2f20
;;
asus,map-ac2200)
- ath10kcal_ubi_extract "Factory" 4096 12064
+ ath10kcal_ubi_extract "Factory" 0x1000 0x2f20
;;
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
- ath10kcal_ubi_extract "Factory" 4096 12064
+ ath10kcal_ubi_extract "Factory" 0x1000 0x2f20
;;
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
@@ -154,29 +154,29 @@ case "$FIRMWARE" in
openmesh,a62 |\
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2)
- ath10kcal_extract "0:ART" 4096 12064
+ ath10kcal_extract "0:ART" 0x1000 0x2f20
;;
engenius,ens620ext)
- ath10kcal_extract "ART" 4096 12064
+ ath10kcal_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
;;
linksys,ea8300)
- ath10kcal_extract "ART" 4096 12064
+ ath10kcal_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
;;
meraki,mr33)
- ath10kcal_ubi_extract "ART" 4096 12064
- ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 4096 12064
+ ath10kcal_ubi_extract "ART" 0x1000 0x2f20
+ ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
;;
netgear,ex6100v2 |\
netgear,ex6150v2)
- ath10kcal_extract "ART" 4096 12064
+ ath10kcal_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0x0)
;;
zyxel,nbg6617 |\
zyxel,wre6606)
- ath10kcal_extract "ART" 4096 12064
+ ath10kcal_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
esac
@@ -188,14 +188,14 @@ case "$FIRMWARE" in
glinet,gl-b1300 |\
linksys,ea6350v3 |\
qcom,ap-dk01.1-c1)
- ath10kcal_extract "ART" 20480 12064
+ ath10kcal_extract "ART" 0x5000 0x2f20
;;
asus,map-ac2200)
- ath10kcal_ubi_extract "Factory" 20480 12064
+ ath10kcal_ubi_extract "Factory" 0x5000 0x2f20
;;
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
- ath10kcal_ubi_extract "Factory" 20480 12064
+ ath10kcal_ubi_extract "Factory" 0x5000 0x2f20
;;
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
@@ -211,29 +211,29 @@ case "$FIRMWARE" in
openmesh,a62 |\
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2)
- ath10kcal_extract "0:ART" 20480 12064
+ ath10kcal_extract "0:ART" 0x5000 0x2f20
;;
engenius,ens620ext)
- ath10kcal_extract "ART" 20480 12064
+ ath10kcal_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
;;
linksys,ea8300)
- ath10kcal_extract "ART" 20480 12064
+ ath10kcal_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
;;
meraki,mr33)
- ath10kcal_ubi_extract "ART" 20480 12064
- ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 20480 12064
+ ath10kcal_ubi_extract "ART" 0x5000 0x2f20
+ ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
;;
netgear,ex6100v2 |\
netgear,ex6150v2)
- ath10kcal_extract "ART" 20480 12064
+ ath10kcal_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0xc)
;;
zyxel,nbg6617 |\
zyxel,wre6606)
- ath10kcal_extract "ART" 20480 12064
+ ath10kcal_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
;;
esac
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 4f21d4a4ef..bdc36070f2 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -23,8 +23,8 @@ ath10kcal_die() {
ath10kcal_from_file() {
local source=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
ath10kcal_die "failed to extract calibration data from $source"
@@ -32,8 +32,8 @@ ath10kcal_from_file() {
ath10kcal_extract() {
local part=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
local mtd
mtd=$(find_mtd_chardev $part)
@@ -80,33 +80,33 @@ case "$FIRMWARE" in
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case $board in
buffalo,wxr-2533dhp)
- ath10kcal_extract "ART" 4096 12064
+ ath10kcal_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 0x1e)
;;
linksys,ea8500)
- ath10kcal_extract "art" 4096 12064
+ ath10kcal_extract "art" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +1)
;;
nec,wg2600hp)
- ath10kcal_extract "ART" 4096 12064
+ ath10kcal_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary PRODUCTDATA 0xc) +1)
;;
netgear,d7800 |\
netgear,r7500v2 |\
netgear,r7800)
- ath10kcal_extract "art" 4096 12064
+ ath10kcal_extract "art" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x6) +1)
;;
tplink,c2600)
- ath10kcal_extract "radio" 4096 12064
+ ath10kcal_extract "radio" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0x8) -1)
;;
tplink,vr2600v)
- ath10kcal_extract "ART" 4096 12064
+ ath10kcal_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0x0) -1)
;;
zyxel,nbg6817)
- ath10kcal_extract "0:ART" 4096 12064
+ ath10kcal_extract "0:ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
;;
esac
@@ -114,33 +114,33 @@ case "$FIRMWARE" in
"ath10k/pre-cal-pci-0001:01:00.0.bin")
case $board in
buffalo,wxr-2533dhp)
- ath10kcal_extract "ART" 20480 12064
+ ath10kcal_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 0x18)
;;
linksys,ea8500)
- ath10kcal_extract "art" 20480 12064
+ ath10kcal_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +2)
;;
nec,wg2600hp)
- ath10kcal_extract "ART" 20480 12064
+ ath10kcal_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary PRODUCTDATA 0xc)
;;
netgear,d7800 |\
netgear,r7500v2 |\
netgear,r7800)
- ath10kcal_extract "art" 20480 12064
+ ath10kcal_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x6) +2)
;;
tplink,c2600)
- ath10kcal_extract "radio" 20480 12064
+ ath10kcal_extract "radio" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0x8)
;;
tplink,vr2600v)
- ath10kcal_extract "ART" 20480 12064
+ ath10kcal_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0x0)
;;
zyxel,nbg6817)
- ath10kcal_extract "0:ART" 20480 12064
+ ath10kcal_extract "0:ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
;;
esac
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
index aec963a721..82f6885221 100644
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
@@ -30,7 +30,7 @@ ath9k_eeprom_die() {
ath9k_eeprom_extract_raw() {
local source=$1
- local offset=$2
+ local offset=$(($2))
local swap=$3
local size=4096
local bs=1
@@ -50,7 +50,7 @@ ath9k_eeprom_extract_raw() {
ath9k_eeprom_extract_reverse() {
local part=$1
local offset=$2
- local count=$3
+ local count=$(($3))
local mtd
local reversed
local caldata
@@ -102,8 +102,8 @@ ath9k_patch_fw_mac_crc() {
ath9k_patch_fw_mac() {
local mac=$1
- local mac_offset=$2
- local chksum_offset=$3
+ local mac_offset=$(($2))
+ local chksum_offset=$(($3))
local xor_mac
local xor_fw_mac
local xor_fw_chksum
@@ -135,40 +135,40 @@ case "$FIRMWARE" in
case "$board" in
arcadyan,arv7518pw)
- ath9k_eeprom_extract "boardconfig" 1024 1
+ ath9k_eeprom_extract "boardconfig" 0x400 1
;;
arcadyan,arv8539pw22)
- ath9k_eeprom_extract "art" 1024 1
+ ath9k_eeprom_extract "art" 0x400 1
;;
bt,homehub-v2b)
- ath9k_eeprom_extract "art" 0 1
- ath9k_patch_fw_mac_crc "00:00:00:00:00:00" 524
+ ath9k_eeprom_extract "art" 0x0 1
+ ath9k_patch_fw_mac_crc "00:00:00:00:00:00" 0x20c
;;
bt,homehub-v3a)
- ath9k_eeprom_extract "art-copy" 0 1
- ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 268
+ ath9k_eeprom_extract "art-copy" 0x0 1
+ ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 0x10c
;;
bt,homehub-v5a)
- ath9k_ubi_eeprom_extract "caldata" 4096 0
- ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 268
+ ath9k_ubi_eeprom_extract "caldata" 0x1000 0
+ ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 0x10c
;;
netgear,dgn3500|netgear,dgn3500b)
- ath9k_eeprom_extract "calibration" 61440 0
- ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524
+ ath9k_eeprom_extract "calibration" 0xf000 0
+ ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 0x20c
;;
avm,fritz3370-rev2-hynix|\
avm,fritz3370-rev2-micron|\
avm,fritz7362sl)
- ath9k_eeprom_extract_reverse "urlader" 5441 1088
+ ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440
;;
avm,fritz7312|avm,fritz7320|avm,fritz7360sl)
- ath9k_eeprom_extract "urlader" 2437 0
+ ath9k_eeprom_extract "urlader" 0x985 0
;;
avm,fritz7412)
/usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader")
;;
tplink,tdw8970|tplink,tdw8980)
- ath9k_eeprom_extract "boardconfig" 135168 0
+ ath9k_eeprom_extract "boardconfig" 0x21000 0
;;
*)
ath9k_eeprom_die "board $board is not supported yet"
diff --git a/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index b02c891cbf..dc66226d7b 100644
--- a/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -9,8 +9,8 @@ ath9k_eeprom_die() {
ath9k_eeprom_extract() {
local part=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
local mtd
mtd=$(find_mtd_chardev $part)
@@ -43,7 +43,7 @@ case "$FIRMWARE" in
"pci_wmac0.eeprom")
case $board in
tplink,tl-wdr4900-v1)
- ath9k_eeprom_extract "caldata" 4096 2048
+ ath9k_eeprom_extract "caldata" 0x1000 0x800
tpl_set_wireless_mac 0
;;
*)
@@ -55,7 +55,7 @@ case "$FIRMWARE" in
"pci_wmac1.eeprom")
case $board in
tplink,tl-wdr4900-v1)
- ath9k_eeprom_extract "caldata" 20480 2048
+ ath9k_eeprom_extract "caldata" 0x5000 0x800
tpl_set_wireless_mac -1
;;
*)
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 6e68f7603d..7b98936ec3 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -7,8 +7,8 @@ rt2x00_eeprom_die() {
rt2x00_eeprom_extract() {
local part=$1
- local offset=$2
- local count=$3
+ local offset=$(($2))
+ local count=$(($3))
local mtd
mtd=$(find_mtd_part $part)
@@ -68,7 +68,7 @@ case "$FIRMWARE" in
;;
dovado,tiny-ac)
wifi_mac=$(mtd_get_mac_ascii u-boot-env INIC_MAC_ADDR)
- rt2x00_eeprom_extract "factory" 0 512
+ rt2x00_eeprom_extract "factory" 0x0 0x200
rt2x00_eeprom_set_macaddr $wifi_mac
;;
*)
--
2.20.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list