[OpenWrt-Devel] [openwrt-devel][PATCH 8/8] at91: Add uboot environment's

[Sandeep Sheriker Mallikarjun]

Add uboot environment's to sdcard image.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun at microchip.com>
---
 target/linux/at91/image/Makefile      | 16 ++++++++++++++--
 target/linux/at91/image/uboot-env.txt | 14 ++++++++++++++
 2 files changed, 28 insertions(+), 2 deletions(-)
 create mode 100644 target/linux/at91/image/uboot-env.txt

diff --git a/target/linux/at91/image/Makefile b/target/linux/at91/image/Makefile
index 6c22c38..7bf9be5 100644
--- a/target/linux/at91/image/Makefile
+++ b/target/linux/at91/image/Makefile
@@ -62,7 +62,11 @@ define Build/at91-sdcard
 
   mcopy -i $@.boot \
 	$(KDIR)/$(DEVICE_NAME)-fit-zImage.itb \
-	::$(DEVICE_NAME:at91-%=%)-fit.itb ,
+	::$(DEVICE_NAME:at91-%=%)-fit.itb
+
+  sed -i '2d;3d' ./uboot-env.txt
+  sed -i '2i board='"$(DEVICE_NAME:at91-%=%)"'' ./uboot-env.txt
+  sed -i '3i board_name='"$(DEVICE_NAME:at91-%=%)"'' ./uboot-env.txt ,
 
   mcopy -i $@.boot $(BIN_DIR)/u-boot-*_mmc/u-boot.bin ::u-boot.bin
 
@@ -70,7 +74,15 @@ define Build/at91-sdcard
     $(BIN_DIR)/at91bootstrap-*sd*/at91bootstrap.bin ::BOOT.bin
 
   mcopy -i $@.boot \
-	$(KDIR)/$(DEVICE_NAME)-fit-zImage.itb ::$(DEVICE_NAME)-fit.itb)
+	$(KDIR)/$(DEVICE_NAME)-fit-zImage.itb ::$(DEVICE_NAME)-fit.itb
+
+  sed -i '2d;3d' ./uboot-env.txt
+  sed -i '2i board='"$(DEVICE_NAME)"'' ./uboot-env.txt
+  sed -i '3i board_name='"$(DEVICE_NAME)"'' ./uboot-env.txt)
+
+  mkenvimage -s 0x4000 -o $(BIN_DIR)/uboot.env ./uboot-env.txt
+
+  mcopy -i $@.boot $(BIN_DIR)/uboot.env ::uboot.env
 
   ./gen_at91_sdcard_img.sh \
       $@.img \
diff --git a/target/linux/at91/image/uboot-env.txt b/target/linux/at91/image/uboot-env.txt
new file mode 100644
index 0000000..6eb859c
--- /dev/null
+++ b/target/linux/at91/image/uboot-env.txt
@@ -0,0 +1,14 @@
+/* Do Not remove First 2 lines, Makefile will modify these lines with proper board names */
+board=at91sam9x25ek
+board_name=at91sam9x25ek
+bootargs=console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4
+bootargsd2=console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait rootfstype=ext4
+bootargsxx=console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4
+bootcmd=run setbootargs; run fatload_mmc; bootm 0x21000000
+bootdelay=1
+fatload_mmc=if test ${board_name} = sama5d2_xplained; then fatload mmc 1:1 0x21000000 ${board_name}-fit.itb; else fatload mmc 0:1 0x21000000 ${board_name}-fit.itb; fi
+setbootargs=if test ${board_name} = sama5d2_xplained; then setenv bootargs ${bootargsd2}; else setenv bootargs ${bootargsxx}; fi
+ethact=gmac0
+stderr=serial
+stdin=serial
+stdout=serial
-- 
2.7.4


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel