[OpenWrt-Devel] [PATCH] ath79: ubnt-m-xw: Fix factory image flashing using TFTP recovery method

Petr Štetiar ynezz at true.cz
Mon Nov 19 15:44:50 EST 2018


From: Joe Ayers <ae6xe at arrl.net>

Ubiquity allows flashing of unsigned factory images via TFTP recovery
method[1]. They claim in airOS v6.0.7 release changelog[2] following:

 All future airOS versions will be signed in this way and not allow
 unsigned firmware to be loaded except via TFTP.

U-boot bootloader on M-XW devices expects factory image revision
version in specific format. On airOS v6.1.7 with `U-Boot 1.1.4-s1039
(May 24 2017 - 15:58:18)` bootloader checks if the revision major(?)
number is actually a number, but in currently generated images there's
OpenWrt text and so the check fails:

 Hit any key to stop autoboot:  0
 Setting default IP 192.168.1.20
 Starting TFTP server...
 Receiving file from 192.168.1.25:38438
 Received 4981148 bytes
 Firmware check failed! (1)

By placing arbitrary correct number first in major version, we make the
bootloader happy and we can flash factory images over TFTP again:

 Received 3735964 bytes
 Firmware Version: XW.ar934x.v6.0.4-42.r8474-56aa1ac-OpenWrt
 Setting U-Boot environment variables
 Un-Protected 1 sectors
 Erasing Flash.... done

Patch provided by AREDN[3] project, tested on Bullet M2 XW (ynezz) and
Nanostation M5 XW (ae6xe).

1. https://help.ubnt.com/hc/en-us/articles/204910124-UniFi-TFTP-Recovery-for-Bricked-Access-Points
2. https://dl.ubnt.com/firmwares/XW-fw/v6.0.7/changelog.txt
3. https://github.com/aredn

Signed-off-by: Petr Štetiar <ynezz at true.cz>
---
 target/linux/ath79/image/generic-ubnt.mk | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk
index 2d0b1ad..66c16e4 100644
--- a/target/linux/ath79/image/generic-ubnt.mk
+++ b/target/linux/ath79/image/generic-ubnt.mk
@@ -1,4 +1,9 @@
-DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION
+DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION
+
+# On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like
+# VERSION_DIST being on the place of major(?) version number, so we need to
+# use some number.
+UBNT_REVISION := $(VERSION_DIST)-$(REVISION)
 
 # mkubntimage is using the kernel image direct
 # routerboard creates partitions out of the ubnt header
@@ -17,7 +22,7 @@ define Build/mkubntimage-split
 	dd if=$@ of=$@.old1 bs=1024k count=1; \
 	dd if=$@ of=$@.old2 bs=1024k skip=1; \
 	$(STAGING_DIR_HOST)/bin/mkfwimage \
-		-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(VERSION_DIST)-$(REVISION) \
+		-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \
 		-k $@.old1 \
 		-r $@.old2 \
 		-o $@; \
@@ -69,6 +74,7 @@ define Device/ubnt-xw
   UBNT_CHIP := ar934x
   UBNT_BOARD := XM
   UBNT_VERSION := 6.0.4
+  UBNT_REVISION := 42.$(UBNT_REVISION)
   ATH_SOC := ar9342
 endef
 
-- 
1.9.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list