[OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP

[Petr Štetiar]

Lech Perczak <lech.perczak at gmail.com> [2018-11-17 10:25:30]:

> > > ar9342_ubnt_xw.dtsi, and then secondary ethernet and USB only enabled in
> > > respective .dts files. It'd be even better if someone on the list had a
> > > Rocket M XW to test, as it is the fullest variant.
>
> > Hm, so maybe I should move definition of mdio and eth0 from
> > ar9342_ubnt_bullet-m-xw.dts to ar9342_ubnt_xw.dtsi as well?  But this could be
> > done later once someone with Nanostation XW shows up and can confirm, that it
> > actually works.
>
> Yes please :)

Yes to what? :-) 

 a) Send third version of the patch with mdio/eth0 in ar9342_ubnt_xw.dtsi
 b) Wait for someone with Nanostation XW to confirm, that it could work and
    don't assume anything

> > > Also, wouldn't you mind reviewing and/or testing my PR regarding RSSI
> > > indicator LEDs on your M2HP on ar71xx target?
> > > It is located on Github: https://github.com/openwrt/openwrt/pull/1372
> > > I only had a chance to test it against Nanobridge M5 (XM version).
>
> > Ok, but I don't have much experience with RSSI LEDs, so can you tell me how
> > would you like me to test it on my M2HP? Thanks.
>
> It's just a matter of flashing build including my patch, and then
> establishing a connection. Bullet may work either as AP or client, the link
> LEDS should just light up and show the signal strength after you connect :)

It seems, that as being on the latest master, all I had to do was adding the
module package:

 diff --git a/target/linux/ath79/image/generic-ubnt.mk
 b/target/linux/ath79/image/generic-ubnt.mk
 index 2d0b1ad..00f1159 100644
 --- a/target/linux/ath79/image/generic-ubnt.mk
 +++ b/target/linux/ath79/image/generic-ubnt.mk
 @@ -66,6 +66,7 @@ endef
  define Device/ubnt-xw
    $(Device/ubnt)
    UBNT_TYPE := XW
 +  DEVICE_PACKAGES += rssileds
    UBNT_CHIP := ar934x
    UBNT_BOARD := XM
    UBNT_VERSION := 6.0.4

and the light show has started, so it works, nice. Thanks!

 Tested-by: Petr Štetiar <ynezz at true.cz>

-- ynezz

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel