[OpenWrt-Devel] [PATCH 0/4 RFCv2] Realtek SMI RTL836x DSA driver

Linus Walleij linus.walleij at linaro.org
Tue May 29 04:49:46 EDT 2018


On Mon, May 28, 2018 at 8:20 PM, Andrew Lunn <andrew at lunn.ch> wrote:
> On Mon, May 28, 2018 at 07:47:48PM +0200, Linus Walleij wrote:
>> This is a second RFC version of the DSA driver for Realtek
>> RTL8366x especially RTL8366RB.
>>
>> I've been beating my head against this one and I'm not really
>> clear on why my ethernet frames are not coming through to the
>> CPU port on the chip.
>>
>> It appears when using ethtool -S on the ports that packets
>> are passing fine into the router fabric and through to the
>> CPU port but the ethernet driver where the fixed link is
>> connected refuse to accept the packages.
>
> Hi Linus
>
> Have you played with RGMII delays?

No not like I changed them or anything... the SoC has some
set-up for skew and delay on the nanosecond level, but I used the
vendor defaults, verified to be the same in their custom
kernel tree.

It's this stuff from the DTS:

+                                       conf0 {
+                                               pins = "V8 GMAC0
RXDV", "T10 GMAC1 RXDV";
+                                               skew-delay = <0>;
+                                       };
+                                       conf1 {
+                                               pins = "Y7 GMAC0 RXC",
"Y11 GMAC1 RXC";
+                                               skew-delay = <15>;
+                                       };
+                                       conf2 {
+                                               pins = "T8 GMAC0
TXEN", "W11 GMAC1 TXEN";
+                                               skew-delay = <7>;
+                                       };
+                                       conf3 {
+                                               pins = "U8 GMAC0 TXC";
+                                               skew-delay = <11>;
+                                       };
+                                       conf4 {
+                                               pins = "V11 GMAC1 TXC";
+                                               skew-delay = <10>;
+                                       };

Yours,
Linus Walleij

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/listinfo/openwrt-devel



More information about the openwrt-devel mailing list