[OpenWrt-Devel] Second RGMII ethernet on MT7621?
Bjørn Mork
bjorn at mork.no
Mon Apr 30 13:08:17 EDT 2018
Hello,
I have been playing with a ZyXEL WAP6805, which appears to be an OEM
version of the https://wikidevi.com/wiki/ZyXEL_WAP6806_(Armor_X1)
This thing has an oversized mini-PCIe Quantenna module. Or that's the
mechanical form factor. The connection between the MT7621 and the
Quantenna QT3840BC appears to be RGMII, ref the OEM bootlog below.
Notice how this brings up both eth2 and eth3 and add them to the br0
bridge. The Quantenna module loads u-boot and a firmware image using
tftp, and it is then managed over the ethernet interface.
So I was looking for a quick way to enable the second ethernet port on
the MT7621, but can't find any. Am I looking the wrong place, or am I
right that the support for this is still lacking? Any idea how many
bits and pieces are missing?
Bjørn
Linux version 2.6.36+ (max at localhost.localdomain) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #23 SMP Fri May 20 09:28:27 CST 2016
The CPU feqenuce set to 880 MHz
GCMP present
CPU revision is: 0001992f (MIPS 1004Kc)
Software DMA cache coherency
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00004000
avail: cpu2 is not ready
avail: cpu3 is not ready
Detected 1 available secondary CPU(s)
PERCPU: Embedded 7 pages/cpu @81083000 s6464 r8192 d14016 u65536
pcpu-alloc: s6464 r8192 d14016 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttyS1,57600n8 root=/dev/ram0 console=ttyS1,57600 root=/dev/ram0 rootfstype=squashfs,jffs2
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Writing ErrCtl register=00011c44
Readback ErrCtl register=00011c44
Memory: 51780k/65536k available (4115k kernel code, 13756k reserved, 1484k data, 7220k init, 0k highmem)
Hierarchical RCU implementation.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:128
Trying to install interrupt handler for IRQ24
Trying to install interrupt handler for IRQ25
Trying to install interrupt handler for IRQ22
Trying to install interrupt handler for IRQ9
Trying to install interrupt handler for IRQ10
Trying to install interrupt handler for IRQ11
Trying to install interrupt handler for IRQ12
Trying to install interrupt handler for IRQ13
Trying to install interrupt handler for IRQ14
Trying to install interrupt handler for IRQ16
Trying to install interrupt handler for IRQ17
Trying to install interrupt handler for IRQ18
Trying to install interrupt handler for IRQ19
Trying to install interrupt handler for IRQ20
Trying to install interrupt handler for IRQ21
Trying to install interrupt handler for IRQ23
Trying to install interrupt handler for IRQ26
Trying to install interrupt handler for IRQ27
Trying to install interrupt handler for IRQ28
Trying to install interrupt handler for IRQ15
Trying to install interrupt handler for IRQ8
Trying to install interrupt handler for IRQ29
Trying to install interrupt handler for IRQ30
Trying to install interrupt handler for IRQ31
CPU0: status register was 11000000
CPU0: status register now 11000000
CPU0: status register frc 11001800
console [ttyS1] enabled
Calibrating delay loop... 579.58 BogoMIPS (lpj=1159168)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
launch: starting cpu1
launch: cpu1 gone!
CPU revision is: 0001992f (MIPS 1004Kc)
Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Brought up 2 CPUs
Synchronize counters across 2 CPUs: done.
NET: Registered protocol family 16
release PCIe RST: RALINK_RSTCTRL = 1000000
PCIE PHY initialize
***** Xtal 40MHz *****
start MT7621 PCIe register access
RALINK_RSTCTRL = 1000000
RALINK_CLKCFG1 = 77ffeff8
*************** MT7621 PCIe RC mode *************
pcie_link status = 0x1
RALINK_RSTCTRL= 1000000
*** Configure Device number setting of Virtual PCI-PCI bridge ***
RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
PCIE0 enabled
interrupt enable status: 100000
Port 0 N_FTS = 1b105000
config reg done
init_rt2880pci done
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
pci 0000:00:00.0: BAR 1: assigned [mem 0x60100000-0x6010ffff]
pci 0000:00:00.0: BAR 1: set to [mem 0x60100000-0x6010ffff] (PCI address [0x60100000-0x6010ffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
pci 0000:01:00.0: BAR 0: set to [mem 0x60000000-0x600fffff] (PCI address [0x60000000-0x600fffff]
pci 0000:00:00.0: PCI bridge to [bus 01-01]
pci 0000:00:00.0: bridge window [io disabled]
pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
pci 0000:00:00.0: bridge window [mem pref disabled]
PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
BAR0 at slot 0 = 0
bus=0x0, slot = 0x0
res[0]->start = 0
res[0]->end = 0
res[1]->start = 60100000
res[1]->end = 6010ffff
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
bus=0x1, slot = 0x0, irq=0x4
res[0]->start = 60000000
res[0]->end = 600fffff
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 128 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
NET: Registered protocol family 1
4 CPUs re-calibrate udelay(lpj = 1167360)
msgmni has been set to 101
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
Ralink gpio driver initialized
spidrv_major = 217
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
brd: module loaded
MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
Allocate 16 byte aligned buffer: 80cb7860
Enable NFI Clock
# MTK NAND # : Use HW ECC
NAND ID [01 F1 80 1D 01, 00801d01]
Device found in MTK table, ID: 1f1, EXT_ID: 801d01
Support this Device in MTK table! 1f1
NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD NAND 128MiB 3,3V 8-bit)
[NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
Scanning device for bad blocks
Creating 10 MTD partitions on "MT7621-NAND":
0x000000000000-0x000008000000 : "ALL"
0x000000000000-0x000000100000 : "Bootloader"
0x000000100000-0x000000200000 : "MRD"
0x000000200000-0x000000300000 : "Factory"
0x000000300000-0x000000400000 : "Config"
0x000000400000-0x000002400000 : "Kernel"
0x000002400000-0x000004400000 : "Kernel2"
0x000004400000-0x000004500000 : "Private"
0x000004500000-0x000005500000 : "Log"
0x000005500000-0x000008000000 : "App"
[mtk_nand] probe successfully!
Signature matched and data read!
load_fact_bbt success 1023
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
rdm_major = 253
GMAC1_MAC_ADRH -- : 0x00006031
GMAC1_MAC_ADRL -- : 0x97661610
Ralink APSoC Ethernet Driver Initilization. v3.1 512 rx/tx descriptors allocated, mtu = 1500!
GMAC1_MAC_ADRH -- : 0x00006031
GMAC1_MAC_ADRL -- : 0x97661610
PROC INIT OK!
register mt_drv
=== pAd = c0282000, size = 813160 ===
<-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
<-- RTMPAllocAdapterBlock, Status=0
pAd->CSRBaseAddress =0xc0180000, csr_addr=0xc0180000!
device_id =0x7603
RtmpChipOpsHook(507): Not support for HIF_MT yet!
mt7603_init()-->
mt_bcn_buf_init(224): Not support for HIF_MT yet!
<--mt7603_init()
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
GRE over IPv4 demultiplexor driver
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
L2TP core driver, V2.0
802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com>
All bugs added by David S. Miller <davem at redhat.com>
Freeing unused kernel memory: 7220k freed
init started: BusAlgorithmics/MIPS FPU Emulator v1.5
yBox v1.12.1 (2016-05-18 18devpts: called with bogus options
:16:53 CST)
starting pid 33, tty '': '/etc_ro/rcS'
mount: mounting none onralink_gpio: irq number(8) pid =38
/ralink_gpio: irq number(1001) pid =38
pralink_gpio: irq number(1001) pid =38
ralink_gpio: irq number(18) pid =37
roc/bus/usb failed: No such file or directory
Welcome to
_______ _______ ___ __ ____ _ _ ___
| ___ \| __ || | |__|| \ | || | / /
| |___|
login as: TX_BCN DESC a25ab000 size = 320
RX[0] DESC a25af000 size = 2048
RX[1] DESC a25b2000 size = 2048
E2pAccessMode=2
cfg_mode=9
cfg_mode=9
wmode_band_equal(): Band Equal!
APSDCapable[0]=0
APSDCapable[1]=0
APSDCapable[2]=0
APSDCapable[3]=0
APSDCapable[4]=0
APSDCapable[5]=0
APSDCapable[6]=0
APSDCapable[7]=0
APSDCapable[8]=0
APSDCapable[9]=0
APSDCapable[10]=0
APSDCapable[11]=0
APSDCapable[12]=0
APSDCapable[13]=0
APSDCapable[14]=0
APSDCapable[15]=0
FW Version:_mt7603mp
FW Build Date:20150624233050
CmdAddressLenReq:(ret = 0)
CmdFwStartReq: override = 1, address = 1048576
CmdStartDLRsp: WiFI FW Download Success
AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
efuse_probe: efuse = 10000012
RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
RtmpEepromGetDefault::e2p_dafault=1
RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
NVM is FLASH mode, flash_offset = 0x40000
1. Phy Mode = 14
Country Region from e2p = ffff
tssi_1_target_pwr_g_band = 34
2. Phy Mode = 14
3. Phy Mode = 14
NICInitPwrPinCfg(14): Not support for HIF_MT yet!
NICInitializeAsic(584): Not support rtmp_mac_sys_reset () for HIF_MT yet!
mt_mac_init()-->
mt7603_init_mac_cr()-->
AsicSetMacMaxLen(1859): Set the Max RxPktLen=1024!
<--mt_mac_init()
WTBL Segment 1 info:
MemBaseAddr/FID:0x28000/0
EntrySize/Cnt:32/128
WTBL Segment 2 info:
MemBaseAddr/FID:0x40000/0
EntrySize/Cnt:64/128
WTBL Segment 3 info:
MemBaseAddr/FID:0x42000/64
EntrySize/Cnt:64/128
WTBL Segment 4 info:
MemBaseAddr/FID:0x44000/128
EntrySize/Cnt:32/128
MtAsicACQueue: Write CR:21510, Value=10421
MtAsicACQueue: Write CR:21500, Value=10421
AntCfgInit(2538): Not support for HIF_MT yet!
RTMPSetPhyMode(): channel out of range, use first ch=0
MCS Set = ff ff 00 00 01
mt7603_switch_channel(): Switch to Ch#1(2T2R), BBP_BW=0
mt7603_switch_channel(): Switch to Ch#2(2T2R), BBP_BW=0
mt7603_switch_channel(): Switch to Ch#3(2T2R), BBP_BW=0
mt7603_switch_channel(): Switch to Ch#4(2T2R), BBP_BW=0
mt7603_switch_channel(): Switch to Ch#5(2T2R), BBP_BW=0
mt7603_switch_channel(): Switch to Ch#6(2T2R), BBP_BW=0
mt7603_switch_channel(): Switch to Ch#7(2T2R), BBP_BW=0
mt7603_switch_channel(): Switch to Ch#8(2T2R), BBP_BW=0
mt7603_switch_channel(): Switch to Ch#9(2T2R), BBP_BW=0
mt7603_switch_channel(): Switch to Ch#10(2T2R), BBP_BW=0
mt7603_switch_channel(): Switch to Ch#11(2T2R), BBP_BW=0
mt7603_switch_channel(): Switch to Ch#12(2T2R), BBP_BW=0
mt7603_switch_channel(): Switch to Ch#13(2T2R), BBP_BW=0
mt7603_switch_channel(): Switch to Ch#1(2T2R), BBP_BW=0
SYNC - BBP R4 to 20MHz.l
mt7603_switch_channel(): Switch to Ch#2(2T2R), BBP_BW=0
SYNC - BBP R4 to 20MHz.l
mt7603_switch_channel(): Switch to Ch#3(2T2R), BBP_BW=0
SYNC - BBP R4 to 20MHz.l
mt7603_switch_channel(): Switch to Ch#4(2T2R), BBP_BW=0
SYNC - BBP R4 to 20MHz.l
mt7603_switch_channel(): Switch to Ch#5(2T2R), BBP_BW=0
SYNC - BBP R4 to 20MHz.l
mt7603_switch_channel(): Switch to Ch#6(2T2R), BBP_BW=0
SYNC - BBP R4 to 20MHz.l
mt7603_switch_channel(): Switch to Ch#7(2T2R), BBP_BW=0
SYNC - BBP R4 to 20MHz.l
mt7603_switch_channel(): Switch to Ch#8(2T2R), BBP_BW=0
SYNC - BBP R4 to 20MHz.l
[PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[PMF]ap_pmf_init:: apidx=1, MFPC=0, MFPR=0, SHA256=0
[PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[PMF]ap_pmf_init:: apidx=2, MFPC=0, MFPR=0, SHA256=0
[PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[PMF]ap_pmf_init:: apidx=3, MFPC=0, MFPR=0, SHA256=0
[PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[PMF]ap_pmf_init:: apidx=4, MFPC=0, MFPR=0, SHA256=0
[PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[PMF]ap_pmf_init:: apidx=5, MFPC=0, MFPR=0, SHA256=0
[PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[PMF]ap_pmf_init:: apidx=6, MFPC=0, MFPR=0, SHA256=0
[PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[PMF]ap_pmf_init:: apidx=7, MFPC=0, MFPR=0, SHA256=0
[PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
AsicSetRalinkBurstMode(4185): Not support for HIF_MT yet!
RTMPSetPiggyBack(921): Not support for HIF_MT yet!
mt7603_switch_channel(): Switch to Ch#3(2T2R), BBP_BW=1
AsicSetTxPreamble(4172): Not support for HIF_MT yet!
AsicAddSharedKeyEntry(2025): Not support for HIF_MT yet!
AsicAddSharedKeyEntry(2025): Not support for HIF_MT yet!
AsicAddSharedKeyEntry(2025): Not support for HIF_MT yet!
AsicAddSharedKeyEntry(2025): Not support for HIF_MT yet!
AsicAddSharedKeyEntry(2025): Not support for HIF_MT yet!
AsicAddSharedKeyEntry(2025): Not support for HIF_MT yet!
AsicAddSharedKeyEntry(2025): Not support for HIF_MT yet!
AsicAddSharedKeyEntry(2025): Not support for HIF_MT yet!
AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0
Main bssid = 62:31:87:66:16:10
<==== rt28xx_init, Status=0
@@@ ed_monitor_init : ===>
@@@ ed_monitor_init : <===
WiFi Startup Cost (ra0): 7.180s
Raeth v3.1 (Tasklet)
free_head_phy is 0xae2000!!!
free_tail_phy is 0xae3ff0!!!
txd_pool=a0ae4000 phy_txd_pool=00AE4000
ei_local->skb_free start address is 0x83ccd48c.
free_txd: a0ae4010, ei_local->cpu_ptr: 00AE4000
POOL HEAD_PTR | DMA_PTR | CPU_PTR
----------------+---------+--------
0xa0ae4000 0x00AE4000 0x00AE4000
phy_rx_ring0 = 0x00ae6000, rx_ring0 = 0xa0ae6000
phy_rx_ring0 = 0x00aea000, rx_ring0 = 0xa0aea000
change HW-TRAP to 0x17ccf!!!!!!!!!!!!GMAC1_MAC_ADRH -- : 0x00006031
GMAC1_MAC_ADRL -- : 0x97661610
GDMA2_MAC_ADRH -- : 0x0000000c
GDMA2_MAC_ADRL -- : 0x432880d3
eth3: ===> VirtualIF_open
CDMA_CSG_CFG = 81000000
GDMA1_FWD_CFG = 20710000
GDMA2_FWD_CFG = 20710000
VID MAC
5 000000000000
9 000000000000
10 000000000000
11 000000000000
device ra0 entered promiscuous mode
device eth2 entered promiscuous mode
br0: port 2(eth2) entering learning state
br0: port 2(eth2) entering learning state
br0: port 1(ra0) entering learning state
br0: port 1(ra0) entering learning state
br0: port 2(eth2) entering learning state
br0: port 1(ra0) entering learning state
br0: port 2(eth2) entering learning state
br0: port 2(eth2) entering learning state
br0: port 1(ra0) entering learning state
br0: port 1(ra0) entering learning state
set mcastVlan to 0 in ethernet driver
ADDRCONF(NETDEV_UP): sit0: link is not ready
ADDRCONF(NETDEV_UP): ip6tnl0: link is not ready
ADDRCONF(NETDEV_UP): ra1: link is not ready
ADDRCONF(NETDEV_UP): ra2: link is not ready
ADDRCONF(NETDEV_UP): ra3: link is not ready
ADDRCONF(NETDEV_UP): ra4: link is not ready
ADDRCONF(NETDEV_UP): ra5: link is not ready
ADDRCONF(NETDEV_UP): ra6: link is not ready
ADDRCONF(NETDEV_UP): ra7: link is not ready
ADDRCONF(NETDEV_UP): eth3: link is not ready
switch register base addr to 0xbe110000
write offset 0x8, value 0x9000c
eth3: ===> VirtualIF_open
device eth3 entered promiscuous mode
br0: port 3(eth3) entering learning state
br0: port 3(eth3) entering learning state
killall rt2860apd 1>/dev/null 2>&1 1>/dev/null 2>&1
br0: port 2(eth2) entering forwarding state
br0: port 1(ra0) entering forwarding state
dropbear.sh 1>/dev/null 2>&1
ralink_gpio: irq number(999) pid =1241
ralink_gpio: irq number(999) pid =1241
br0: port 3(eth3) entering forwarding state
killall -q udpsvd 1>/dev/null 2>&1
udpsvd -Ev 0 69 tftpd& 1>/dev/null 2>&1
ntp.sh 1>/dev/null 2>&1
rm -rf /var/run/wscd.pid.ra0 1>/dev/null 2>&1
iwpriv ra0 set WscConfMode=0 1>/dev/null 2>&1
iwpriv ra0 set WscConfMode=7 1>/dev/null 2>&1
iwpriv ra0 set WscConfStatus=1 1>/dev/null 2>&1
route add -host 239.255.255.250 dev br0 1>/dev/null 2>&1
wscd -m 1 -a 169.254.71.254 -i ra0 -D 1>/dev/null 2>&1
killall -q klogd 1>/dev/null 2>&1
killall -q syslogd 1>/dev/null 2>&1
syslogd -C8 1>/dev/null 2>&1 1>/dev/null 2>&1
klogd 1>/dev/null 2>&1 1>/dev/null 2>&1
killall -q mini_httpd 1>/dev/null 2>&1
mkdir -p /var/web 1>/dev/null 2>&1
cp -r /etc_ro/web/* /var/web 1>/dev/null 2>&1
mini_httpd -p 80 -C /etc_ro/mini_httpd_debug.conf 1>/dev/null 2>&1
wpsState=3 monitorInterface=-1 wpsEnd=0
6: slow blinking Green (2 sec), Amber (0,25 sec)
login as:
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list