[OpenWrt-Devel] [LEDE-DEV] [PATCH 0/4] Gemini forward-port to kernel v4.14

[Roman Yeryomin]

On 2018-04-27 09:18, John Crispin wrote:
> On 17/04/18 00:34, Roman Yeryomin wrote:
>> On 2018-04-15 20:22, Roman Yeryomin wrote:
>>> On 2018-04-14 20:36, Hans Ulli Kroll wrote:
>>>> Hi Roman
>>>> 
>>>> On Tue, 10 Apr 2018, Linus Walleij wrote:
>>>> 
>>>>> On Mon, Apr 9, 2018 at 12:38 PM, Roman Yeryomin <roman at advem.lv> 
>>>>> wrote:
>>>>> 
>>>>> > I have tested them quickly yesterday on nas4220b board. Although I've
>>>>> > managed to boot it (had to fix rootfs image) ethernet and usb didn't work.
>>>>> > And I didn't check anything else.
>>>>> > I didn't yet look at the code but before I dive there I have a question: did
>>>>> > you have a chance to test it yourself on any of the boards? And if yes,
>>>>> > which one?
>>>>> 
>>>> 
>>>> I think the fotg controller gets stalled after a port reset.
>>>> Please check attached (untested) patch for openwrt.
>>>> I can test this next week by myself
>>>> 
>>>> +diff --git a/drivers/usb/host/fotg210-hcd.c 
>>>> b/drivers/usb/host/fotg210-hcd.c
>>>> +index 2acc51b0be5a..bc9efb49adc7 100644
>>>> +--- a/drivers/usb/host/fotg210-hcd.c
>>>> ++++ b/drivers/usb/host/fotg210-hcd.c
>>>> +@@ -1653,6 +1653,10 @@ static int fotg210_hub_control(struct 
>>>> usb_hcd
>>>> *hcd, u16 typeReq, u16 wValue,
>>>> +             /* see what we found out */
>>>> +             temp = check_reset_complete(fotg210, wIndex, 
>>>> status_reg,
>>>> +                     fotg210_readl(fotg210, status_reg));
>>>> ++
>>>> ++            /* restart schedule */
>>>> ++            fotg210->command |= CMD_RUN;
>>>> ++            fotg210_writel(fotg210, fotg210->command, 
>>>> &fotg210->regs->command);
>>>> +         }
>>>> +
>>>> +         if (!(temp & (PORT_RESUME|PORT_RESET))) {
>>>> +--
>>>> +2.16.2
>>>> +
>>> 
>>> Didn't work for me :(
>>> 
>> 
>> I've found why it didn't work:
>> [    5.845199] Warning! fotg210_hcd should always be loaded before 
>> uhci_hcd and ohci_hcd, not after
>> 
>> After fixing kernel config and applying your patch it works.
>> So your patch works and is needed indeed.
>> 
>> But there are other problems.
>> Second USB (USB1) port cannot be initialized and only USB0 is working:
>> [    5.843831] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
>> [    5.844298] pinctrl-gemini 40000000.syscon:pinctrl: ACTIVATE 
>> function "usb" with group "usbgrp"
>> [    5.845067] fotg210-hcd 68000000.usb: initialized Gemini PHY
>> [    5.845095] fotg210-hcd 68000000.usb: Faraday USB2.0 Host 
>> Controller
>> [    5.845176] fotg210-hcd 68000000.usb: new USB bus registered, 
>> assigned bus number 1
>> [    5.845696] fotg210-hcd 68000000.usb: irq 29, io mem 0x68000000
>> [    5.877212] fotg210-hcd 68000000.usb: USB 2.0 started, EHCI 1.00
>> [    5.880314] hub 1-0:1.0: USB hub found
>> [    5.880546] hub 1-0:1.0: 1 port detected
>> [    5.904768] pinctrl-gemini 40000000.syscon:pinctrl: pin T6 USB GNDA 
>> U20 already requested by 68000000.usb; cannot claim for 69000000.usb
>> [    5.904807] pinctrl-gemini 40000000.syscon:pinctrl: pin-305 
>> (69000000.usb) status -22
>> [    5.904845] pinctrl-gemini 40000000.syscon:pinctrl: could not 
>> request pin 305 (T6 USB GNDA U20) from group usbgrp  on device 
>> pinctrl-gemini
>> [    5.904872] fotg210-hcd 69000000.usb: Error applying setting, 
>> reverse things back
>> [    5.904928] fotg210-hcd: probe of 69000000.usb failed with error 
>> -22
>> 
>> After removing pinctrl from USB1 it is initialized but then only USB1 
>> is working, USB0 is seen but there are no interrupts.
>> Didn't yet look at the code, maybe you will know where to fix right 
>> away.
>> 
>> Regards,
>> Roman
>> 
> 
> Hi,
> how shall we proceed ? merge 1, 2 and 3, let roman fix the regressions
> and then merge 4 ? or drop the series for now and let you guys send a
> V2 with the regression fixes integrated ?

Hi John,
I've prepared 4.14 branch here 
https://github.com/yeryomin/openwrt/commits/gemini-4.14
I think it can be merged in it's current state. The only problem I'm 
aware of is that usb is not fully working (afaik, Hans is working on 
it).

Linus, could you test that branch on your device and see if network is 
working by default?


Regards,
Roman
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel