[OpenWrt-Devel] Wifi-related kernel-oops on mt7621 after 4.14 update
John Crispin
john at phrozen.org
Thu Apr 12 07:02:22 EDT 2018
On 12/04/18 12:42, Kristian Evensen wrote:
> Hello,
>
> I have recently updated some ramips mt7621-devices (ZBT WG3526) to the
> latest nightly. Almost everything seems to work fine, but using either
> wifi interface in client mode seems triggers an oops. I see two
> different oops-messages:
>
> Message 1:
> [ 66.442802] CPU 1 Unable to handle kernel paging request at virtual
> address e9e9e0d5, epc == 8f3e060c, ra == 8ec86fac
> [ 66.453460] Oops[#1]:
> [ 66.455743] CPU: 1 PID: 3679 Comm: wifib Tainted: G W 4.14.32 #0
> [ 66.462857] task: 8e223200 task.stack: 8e1b4000
> [ 66.467374] $ 0 : 00000000 00000001 7abc2e80 00000020
> [ 66.472612] $ 4 : 8ec48bc0 8e76dc20 e9e9dae0 8e1b5848
> [ 66.477847] $ 8 : 8ec4902c 80452968 00ee4000 ffffff80
> [ 66.483061] $12 : 80583f8c 00000040 00000000 77f0f3c0
> [ 66.488276] $16 : 8ec49560 8f578000 8e76d480 8ec48bc0
> [ 66.493493] $20 : 00000000 00000002 8e1b5cb8 00000008
> [ 66.498711] $24 : 00000000 77e74ff0
> [ 66.503937] $28 : 8e1b4000 8e1b5780 00000000 8ec86fac
> [ 66.509153] Hi : 00000000
> [ 66.512020] Lo : 00000068
> [ 66.514913] epc : 8f3e060c 0x8f3e060c
> [ 66.518866] ra : 8ec86fac sta_set_sinfo+0xcc/0xbb0 [mac80211]
> [ 66.524843] Status: 11007c03 KERNEL EXL IE
> [ 66.529015] Cause : 40800008 (ExcCode 02)
> [ 66.533005] BadVA : e9e9e0d5
> [ 66.535869] PrId : 0001992f (MIPS 1004Kc)
> [ 66.539941] Modules linked in: rt2800pci rt2800mmio rt2800lib
> qcserial ppp_async option usb_wwan rt2x00pci rt2x00mmio rt2x00lib
> rndis_host qmi_wwan ppp_generic nf_nat_pptp nf_conntrack_pptp
> nf_conntrack_ipv6p
> [ 66.610889] nf_nat_snmp_basic nf_nat_sip nf_nat_redirect
> nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4
> nf_nat_ipv4 nf_nat_h323 nf_nat_ftp nf_nat_amanda nf_nat nf_log_ipv4
> nf_flow_tablt
> [ 66.681822] ip_set_hash_netiface ip_set_hash_netport
> ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet
> ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip
> ip_set_hash_ipport ip_set_hash_ipmarm
> [ 66.753184] ohci_hcd ehci_platform sd_mod scsi_mod ehci_hcd
> gpio_button_hotplug usbcore nls_base usb_common mii
> [ 66.763357] Process wifib (pid: 3679, threadinfo=8e1b4000,
> task=8e223200, tls=77f10ec0)
> [ 66.771321] Stack : 00000000 00000000 00000000 00000000 00000000
> 00000000 8e1b5848 8f578000
> [ 66.779654] 8e76d480 8ec48bc0 8f578130 00000002 8e1b5cb8
> 00000008 00000000 8ec86fac
> [ 66.787987] 01000000 8e134628 00000007 8e1b5b98 8e134628
> 00000000 8e1b5b90 8ec49014
> [ 66.796325] 8e76d000 00000000 fffffffe 00000002 8e1b5cb8
> 8ec9e338 8ec315ac 00000000
> [ 66.804661] 000001d2 80580000 00000000 00000000 00000000
> 8e134628 8e068840 8ec1fb28
> [ 66.812996] ...
> [ 66.815446] Call Trace:
> [ 66.817894] [<8f3e060c>] 0x8f3e060c
> [ 66.821370] Code: 000630c0 02063021 94f40002 <90d205f5> 00e0b025
> 16800002 3253ffff 2414001f 96d50004
> [ 66.831098]
> [ 66.833187] ---[ end trace 8c8a003de3eabcd8 ]---
> [ 66.841897] Kernel panic - not syncing: Fatal exception
> [ 66.849317] Rebooting in 3 seconds..
>
> Message 2:
> [ 132.613293] CPU 0 Unable to handle kernel paging request at virtual
> address ea9160d5, epc == 8f2c060c, ra == 8ec86fac
> [ 132.623927] Oops[#1]:
> [ 132.626199] CPU: 0 PID: 41 Comm: kworker/u8:3 Tainted: G W
> 4.14.32 #0
> [ 132.633882] Workqueue: phy0 ieee80211_ibss_leave [mac80211]
> [ 132.639431] task: 8fd48c80 task.stack: 8fd94000
> [ 132.643933] $ 0 : 00000000 00000001 7ac52e80 00000020
> [ 132.649141] $ 4 : 8f2d0bc0 8e04dc20 ea915ae0 8f122400
> [ 132.654350] $ 8 : 00000000 80452970 8fc02b00 0005376b
> [ 132.659558] $12 : 000012d8 00000000 ffffffff 0000001c
> [ 132.664766] $16 : 8f2d1560 8f58a000 8e04d480 8f2d0bc0
> [ 132.669973] $20 : 00000000 00000001 8f2d1014 00000000
> [ 132.675181] $24 : 3b9aca00 00000000
> [ 132.680390] $28 : 8fd94000 8fd95c88 8ece1618 8ec86fac
> [ 132.685605] Hi : 000007d0
> [ 132.688473] Lo : 00000bb8
> [ 132.691357] epc : 8f2c060c 0x8f2c060c
> [ 132.695235] ra : 8ec86fac sta_set_sinfo+0xcc/0xbb0 [mac80211]
> [ 132.701212] Status: 11008403 KERNEL EXL IE
> [ 132.705391] Cause : 40800008 (ExcCode 02)
> [ 132.709380] BadVA : ea9160d5
> [ 132.712247] PrId : 0001992f (MIPS 1004Kc)
> [ 132.716320] Modules linked in: rt2800pci rt2800mmio rt2800lib
> qcserial ppp_async option usb_wwan rt2x00pci rt2x00mmio rt2x00lib
> rndis_host qmi_wwan ppp_generic nf_nat_pptp nf_conntrack_pptp
> nf_conntrack_ipv6p
> [ 132.787381] nf_nat_snmp_basic nf_nat_sip nf_nat_redirect
> nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4
> nf_nat_ipv4 nf_nat_h323 nf_nat_ftp nf_nat_amanda nf_nat nf_log_ipv4
> nf_flow_tablt
> [ 132.858369] ip_set_hash_netiface ip_set_hash_netport
> ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet
> ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip
> ip_set_hash_ipport ip_set_hash_ipmarm
> [ 132.929808] ohci_hcd ehci_platform sd_mod scsi_mod ehci_hcd
> gpio_button_hotplug usbcore nls_base usb_common mii
> [ 132.939989] Process kworker/u8:3 (pid: 41, threadinfo=8fd94000,
> task=8fd48c80, tls=00000000)
> [ 132.948385] Stack : 00000001 8f2c08fc 8f2d1330 8e04d480 8f2d0bc0
> 8e04d480 8f122400 8f58a000
> [ 132.956736] 8e04d480 8f2d0bc0 8f58a130 00000001 8f2d1014
> 00000000 8ece1618 8ec86fac
> [ 132.965084] 00000002 8f58a000 00000001 8ec86df4 8f58a000
> 8f2d0bc0 8f58a000 8f122400
> [ 132.973434] 8e04d480 8e04d480 8fd95d38 00000001 8f2d1014
> 8ec87a10 00000000 8007be44
> [ 132.981784] 00000000 00000000 00000000 8fd95d10 8fd95d30
> 8f2d102c 8f2d102c 8ec87de8
> [ 132.990130] ...
> [ 132.992578] Call Trace:
> [ 132.995025] [<8f2c060c>] 0x8f2c060c
> [ 132.998506] Code: 000630c0 02063021 94f40002 <90d205f5> 00e0b025
> 16800002 3253ffff 2414001f 96d50004
> [ 133.008251]
> [ 133.011063] ---[ end trace 43bd4ffe21fcd0aa ]---
> [ 133.019992] Kernel panic - not syncing: Fatal exception
> [ 133.027692] Rebooting in 3 seconds..
>
> The WG3526 uses mt7603 for 2.4GHz and mt7612 for 5GHz, and the error
> happens with either. Using the interfaces as APs works fine (at least
> in my tests), and using the interfaces as clients works fine with
> kernel 4.9.
try enabling KALLSYMS to get a verbose stack trace.
John
>
> Thanks in advance for any help,
> Kristian
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list