[OpenWrt-Devel] Unable to connect with uqmi ("No effect")

Bjørn Mork bjorn at mork.no
Mon May 29 07:54:44 EDT 2017


Carlo Lobrano <c.lobrano at gmail.com> writes:

>> AFAICS, that is the expected result.  The modem is connected and you do
>> not disconnect, so "start-network" has no effect.
>
> Yes, you're right, but why am I connected in the first place? There is no
> context configured

If autoconnect is enabled, then I believe the modem will try to connect
with whatever it has. Don't know if it tries an empty APN or reuse the
default bearer context in this case, but either will most likely work
(depending on operator, but still..)


>> If "--set-autoconnect disabled" does not work as expected, then please
>> try "--stop-network --autoconnect".
>
> doesn't stop-network require an handle?
>
>     $ sudo uqmi -d /dev/cdc-wdm1 --stop-network --autoconnect
>     "Invalid handle"

Probably.  My point was just that you could try to include
"--autoconnect", which will disable the autoconnect feature.  I am too
lazy to bother to write the whole command ;-)



Bjørn
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list