[OpenWrt-Devel] Custom build with reghack on trunk or any branch

[heini66]

if you use country 00, txpower is not limtied even without the patch. i
don't know anything about the patch and how it works. but on my <3 tplink
4900 (mpc85xx target) i get with 00
iwinfo phy1 txpowerlist
   0 dBm (   1 mW)
   1 dBm (   1 mW)
   2 dBm (   1 mW)
   3 dBm (   1 mW)
   4 dBm (   2 mW)
   5 dBm (   3 mW)
   6 dBm (   3 mW)
   7 dBm (   5 mW)
   8 dBm (   6 mW)
   9 dBm (   7 mW)
  10 dBm (  10 mW)
  11 dBm (  12 mW)
  12 dBm (  15 mW)
  13 dBm (  19 mW)
  14 dBm (  25 mW)
  15 dBm (  31 mW)
  16 dBm (  39 mW)
  17 dBm (  50 mW)
  18 dBm (  63 mW)
  19 dBm (  79 mW)
  20 dBm ( 100 mW)
  21 dBm ( 125 mW)
  22 dBm ( 158 mW)
  23 dBm ( 199 mW)
  24 dBm ( 251 mW)
* 25 dBm ( 316 mW)

 iw phy1 info
Wiphy phy1
    max # scan SSIDs: 4
    max scan IEs length: 2257 bytes
    max # sched scan SSIDs: 0
    max # match sets: 0
    max # scan plans: 1
    max scan plan interval: -1
    max scan plan iterations: 0
    Retry short limit: 7
    Retry long limit: 4
    Coverage class: 0 (up to 0m)
    Device supports AP-side u-APSD.
    Device supports T-DLS.
    Available Antennas: TX 0x7 RX 0x7
    Configured Antennas: TX 0x7 RX 0x7
    Supported interface modes:
         * IBSS
         * managed
         * AP
         * AP/VLAN
         * monitor
         * mesh point
         * P2P-client
         * P2P-GO
         * outside context of a BSS
    Band 1:
        Capabilities: 0x11ef
            RX LDPC
            HT20/HT40
            SM Power Save disabled
            RX HT20 SGI
            RX HT40 SGI
            TX STBC
            RX STBC 1-stream
            Max AMSDU length: 3839 bytes
            DSSS/CCK HT40
        Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
        Minimum RX AMPDU time spacing: 8 usec (0x06)
        HT TX/RX MCS rate indexes supported: 0-23
        Frequencies:
            * 2412 MHz [1] (25.0 dBm)
            * 2417 MHz [2] (25.0 dBm)
            * 2422 MHz [3] (25.0 dBm)
            * 2427 MHz [4] (25.0 dBm)
            * 2432 MHz [5] (25.0 dBm)
            * 2437 MHz [6] (25.0 dBm)
            * 2442 MHz [7] (25.0 dBm)
            * 2447 MHz [8] (25.0 dBm)
            * 2452 MHz [9] (25.0 dBm)
            * 2457 MHz [10] (25.0 dBm)
            * 2462 MHz [11] (25.0 dBm)
            * 2467 MHz [12] (disabled)
            * 2472 MHz [13] (disabled)
            * 2484 MHz [14] (disabled)
    valid interface combinations:
         * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client,
P2P-GO } <= 1, #{ IBSS } <= 1,
           total <= 2048, #channels <= 1, STA/AP BI must match, radar
detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz }

    HT Capability overrides:
         * MCS: ff ff ff ff ff ff ff ff ff ff
         * maximum A-MSDU length
         * supported channel width
         * short GI for 40 MHz
         * max A-MPDU length exponent
         * min MPDU start spacing


so i don't think the patch is working @all ...


cheers

2017-07-20 23:52 GMT+02:00 Jenny Cabrera Varona <jenny.cabrera at reduc.edu.cu>
:

> > you are probably using outdated patch
> >
>
> Tom Psyborg:
> patch it's working well i test it manually and it works, right now i just
> have troubles to get 2312-2732 MHz frequencies, tx power already unlocked,
> using country 00 i can set channels from 1-14 ...
>
> what i need to do for 2312-2732 MHz
> thanks for all
>
> ------------------------------------------------------------
> -------------------
> ---- Universidad de Camagüey "Ignacio Agramonte Loynaz", Cuba
> ----------------
> ------------------------------------------------------------
> -------------------
> ---- 6 de noviembre de 2017    ------------------------------
> ------------------
> ----- Aniversario 50 de la Universidad de Camagüey "Ignacio Agramonte
> Loynaz"-
> ---- "50 años de ciencia y compromiso" ------------------------------
> ---------
> ------------------------------------------------------------
> -------------------
> ---- Aniversario 95 de la FEU ------------------------------
> -------------------
> ---- https://www.reduc.edu.cu/ ------------------------------
> ------------------
> ------------------------------------------------------------
> -------------------
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20170721/71d3b30a/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel