[OpenWrt-Devel] ath10k mesh + ap + encryption?

[Sven Eckelmann]

On Montag, 19. September 2016 08:43:56 CEST Simon Wunderlich wrote:
[...]
> > We're testing encrypted AP + Mesh quite successfully right now with
> > this firmware: https://github.com/kvalo/ath10k-firmware/commit/307cb46b
> > 06661ebd3186723b5002de769c7add83, of course that is for a QCA4019 chip.
> > Which chip are you using? I can poke the firmware guys for possibility
> > of getting a 10.4.3.2 firmware build for it.
> 
> Hi Thomas,
> 
> thanks for the hint! We are using an older QCA9882. I assume your firmware
> will not work for this one? If you can poke the firmware guys, that would
> be great.
> :)
> 
> We also want to test the 70.52 firmware version next, maybe there were some
> changes since the .42 we used.

I have just checked it with 10.2.4.70.54:

               | 802.11s encrypted | 802.11s unencrypted
---------------+-------------------+--------------------
AP encrypted   | AP doesn't beacon | works
AP unencrypted | AP doesn't beacon | works

I've also checked 10.2.4.70.12-2 (doesn't seem to support encrypted mesh at 
all) and with rawmode=1 (makes no difference).

Kind regards,
	Sven
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20160919/b9028c87/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel