[OpenWrt-Devel] ATH10K VLAN firmware issue

[Valo, Kalle]

Bruno Antunes <baantunes at gmail.com> writes:

> On 4 November 2016 at 21:17, Valo, Kalle <kvalo at qca.qualcomm.com> wrote:
>> Bruno Antunes <baantunes at gmail.com> writes:
>>
>>> Old thread but I think the issue is still present.
>>>
>>> I'm running a setup with VLANs with WDS and ath10k cards.
>>>
>>> To make it work both cards must be loaded in rawmode, AP
>>> and Sta, and with no security.
>>>
>>> I'm using a OpenWrt trunk r49941 and the most recent firmware,
>>> 10.2.4.70.58, from Kalle ath10k firmware tree.
>>>
>>> Although it works the throughput is very bad.
>>> Are there any alternatives to improve the throughput.
>>
>> Can someone file a bug to bugzilla about this so that all the info is
>> properly stored? The more comprehensive the report is the better.
>>
>> https://bugzilla.kernel.org/
>
> I will file a bug report.

Thanks, it's good to store all in one place so that it's easier to find
the relevant info.

> But since it appears to be a firmware related issue
> under what category can fill in the bug?

You can file it under Drivers/network-wireless, AFAIK we don't have any
separate components for firmware bugs. Here's one example to follow:

https://bugzilla.kernel.org/show_bug.cgi?id=186161

-- 
Kalle Valo
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel