[OpenWrt-Devel] [PATCH] mac80211.sh: add support of VHT80 for mesh

Yeoh Chun-Yeow yeohchunyeow at gmail.com
Fri May 6 13:31:24 EDT 2016


I think that it is alright if we solely depends on the wap_supplicant
for both open mesh and secured mesh.

----
Chun-Yeow

On Sat, May 7, 2016 at 1:16 AM, Daniel Golle <daniel at makrotopia.org> wrote:
> On Sat, May 07, 2016 at 01:01:30AM +0800, Yeoh Chun-Yeow wrote:
>> authsae and wpa_supplicant only trigger if secured mesh.
>> wpa_supplicant should work correctly for VHT80 but don't think
>> authsae.
>>
>> But this patch is intended to allow open mesh to support VHT80.
> So maybe only enable it if $key isn't set and leave a comment in place
> that testing is needed before enabling it for authsae and/or
> wpa_supplicant.
> It might well break authsae and wpa_supplicant already handles up to
> VHT160, see
> http://w1.fi/cgit/hostap/commit/wpa_supplicant/mesh.c?id=a65efbfb243dda41518720f14724db055444bb56
> and
> http://w1.fi/cgit/hostap/commit/wpa_supplicant/mesh.c?id=d06a35052f182d3aebc7b7e1c780cca7b386997d
> so no need to set it here again.
>
>
>>
>> Thanks
>>
>> ----
>> Chun-Yeow
>>
>> On Sat, May 7, 2016 at 12:53 AM, Daniel Golle <daniel at makrotopia.org> wrote:
>> > Hi Chun-Yeow,
>> >
>> > On Sat, May 07, 2016 at 12:35:17AM +0800, Chun-Yeow Yeoh wrote:
>> >> Add support of VHT80 setting for mesh interface
>> >>
>> >> Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow at gmail.com>
>> >> ---
>> >>  .../mac80211/files/lib/netifd/wireless/mac80211.sh | 33 +++++++++++-----------
>> >>  1 file changed, 17 insertions(+), 16 deletions(-)
>> >>
>> >> diff --git a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
>> >> index 02c195e..d680ac2 100644
>> >> --- a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
>> >> +++ b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
>> >> @@ -473,7 +473,7 @@ mac80211_prepare_vif() {
>> >>       esac
>> >>
>> >>       case "$mode" in
>> >> -             monitor|mesh)
>> >> +             monitor)
>> >>                       [ "$auto_channel" -gt 0 ] || iw dev "$ifname" set channel "$channel" $htmode
>> >>               ;;
>> >>       esac
>> >> [...]
>> >
>> >> @@ -566,7 +566,7 @@ mac80211_setup_adhoc() {
>> >>       mcval=
>> >>       [ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate"
>> >>
>> >> -     iw dev "$ifname" ibss join "$ssid" $freq $ibss_htmode fixed-freq $bssid \
>> >> +     iw dev "$ifname" ibss join "$ssid" $freq $bss_htmode fixed-freq $bssid \
>> >>               ${beacon_int:+beacon-interval $beacon_int} \
>> >>               ${brstr:+basic-rates $brstr} \
>> >>               ${mcval:+mcast-rate $mcval} \
>> >> @@ -612,7 +612,8 @@ mac80211_setup_vif() {
>> >>                               mcval=
>> >>                               [ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate"
>> >>
>> >> -                             iw dev "$ifname" mesh join "$mesh_id" ${mcval:+mcast-rate $mcval}
>> >> +                             mac80211_setup_bss_htmode
>> >
>> > have you tested this with authsae AND wpa_supplicant as well?
>> > I haven't look into it but suspect that wpa_supplicant might expect
>> > those things to be set via its configuration file instead of using
>> > iw dev ...
>> >
>> > Cheers
>> >
>> > Daniel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list