[OpenWrt-Devel] [PATCH v2] ramips: Add support for ZBT WG3526

Kristian Evensen kristian.evensen at gmail.com
Wed Mar 23 10:40:41 EDT 2016


From: Kristian Evensen <kristian.evensen at gmail.com>

The WG3526 is the follow-up to the 2626 and is mostly the same, with the
excaption that the mt7602 has been replaced with the mt7603. The internal wifi
setup has also changed slightly. Based on my tests, everything that worked on
the 2626 works on the 3526 and with roughly the same performance.

Change v1->v2:
* Remove some references to 2626 that I had missed in the dts.

Signed-off-by: Kristian Evensen <kristian.evensen at gmail.com>
---
 .../linux/ramips/base-files/etc/board.d/02_network |   1 +
 target/linux/ramips/base-files/etc/diag.sh         |   3 +-
 target/linux/ramips/base-files/lib/ramips.sh       |   3 +
 .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
 target/linux/ramips/dts/ZBT-WG3526.dts             | 127 +++++++++++++++++++++
 target/linux/ramips/image/Makefile                 |   7 +-
 target/linux/ramips/mt7621/profiles/zbt.mk         |  13 +++
 7 files changed, 153 insertions(+), 2 deletions(-)
 create mode 100644 target/linux/ramips/dts/ZBT-WG3526.dts

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 4b65d36..36e9d3c 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -86,6 +86,7 @@ ramips_setup_interfaces()
 	wt1520|\
 	y1|\
 	zbt-wg2626|\
+	zbt-wg3526|\
 	youku-yk1)
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6 at eth0"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index daa7fb1..9312a27 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -65,7 +65,8 @@ get_status_led() {
 	v11st-fe|\
 	vocore|\
 	wmr-300|\
-	zbt-wg2626)
+	zbt-wg2626|\
+	zbt-wg3526)
 		status_led="$board:green:status"
 		;;
 	atp-52b|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 5f1df7b..9a54361 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -505,6 +505,9 @@ ramips_board_detect() {
 	*"ZBT-WG2626")
 		name="zbt-wg2626"
 		;;
+	*"ZBT-WG3526")
+		name="zbt-wg3526"
+		;;
 	*"ZBT-WR8305RT")
 		name="zbt-wr8305rt"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index c329dce..e9b8b8d 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -149,6 +149,7 @@ platform_check_image() {
 	zbt-wa05|\
 	zbt-we826|\
 	zbt-wg2626|\
+	zbt-wg3526|\
 	zbt-wr8305rt|\
 	zte-q7|\
 	youku-yk1)
diff --git a/target/linux/ramips/dts/ZBT-WG3526.dts b/target/linux/ramips/dts/ZBT-WG3526.dts
new file mode 100644
index 0000000..30b508c
--- /dev/null
+++ b/target/linux/ramips/dts/ZBT-WG3526.dts
@@ -0,0 +1,127 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+/ {
+	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+	model = "ZBT-WG3526";
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	sdhci at 10130000 {
+		status = "okay";
+	};
+
+	palmbus at 1E000000 {
+		spi at b00 {
+			status = "okay";
+
+			m25p80 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "jedec,spi-nor";
+				reg = <0 0>;
+				linux,modalias = "m25p80";
+				spi-max-frequency = <10000000>;
+
+				partition at 0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition at 30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition at 40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition at 50000 {
+					label = "firmware";
+					reg = <0x50000 0xfb0000>;
+				};
+
+			};
+		};
+
+		i2c at 900 {
+			compatible = "ralink,i2c-mt7621";
+			reg = <0x900 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c_pins>;
+			status = "okay";
+		};
+	};
+
+	pcie at 1e140000 {
+		status = "okay";
+
+		pcie0 {
+			mt76 at 0,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x0000>;
+				mediatek,5ghz = <0>;
+			};
+		};
+
+		pcie1 {
+			mt76 at 1,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x8000>;
+				mediatek,2ghz = <0>;
+			};
+		};
+	};
+
+	ethernet at 1e100000 {
+		mtd-mac-address = <&factory 0xe000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 18 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "zbt-wg3526:green:status";
+			gpios = <&gpio0 24 1>;
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
+				ralink,function = "gpio";
+			};
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 0cfb8fb..0612d17 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -1058,7 +1058,7 @@ endif
 #
 
 ifeq ($(SUBTARGET),mt7621)
-  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 ubnt-erx witi wf-2881 zbt-wg2626
+  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 ubnt-erx witi wf-2881 zbt-wg2626 zbt-wg3526
 endif
 
 define Device/mt7621
@@ -1120,6 +1120,11 @@ define Device/zbt-wg2626
   IMAGE_SIZE := $(ralink_default_fw_size_16M)
 endef
 
+define Device/zbt-wg3526
+  DTS := ZBT-WG3526
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+
 define Device/wf-2881
   DTS := WF-2881
   BLOCKSIZE := 128KiB
diff --git a/target/linux/ramips/mt7621/profiles/zbt.mk b/target/linux/ramips/mt7621/profiles/zbt.mk
index 07131d1..890cc14 100644
--- a/target/linux/ramips/mt7621/profiles/zbt.mk
+++ b/target/linux/ramips/mt7621/profiles/zbt.mk
@@ -16,3 +16,16 @@ define Profile/ZBT-WG2626/Description
 	Package set for ZBT-WG2626 device
 endef
 $(eval $(call Profile,ZBT-WG2626))
+
+
+define Profile/ZBT-WG3526
+	NAME:=ZBT-WG3526 Device
+	PACKAGES:=\
+		kmod-usb-core kmod-usb3 kmod-sdhci-mt7620 \
+		kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci
+endef
+
+define Profile/ZBT-WG3526/Description
+	Package set for ZBT-WG3526 device
+endef
+$(eval $(call Profile,ZBT-WG3526))
-- 
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list